Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A scale for rapidly weighing ingredients in a commercial bakery operation is shown. An empty bowl is first placed on the scale. Electrical contact is made at point A, which illuminates a light indicating the bowl's contents are underweight. A bakery ingredient, such as flour, is slowly poured into the bowl. When a sufficient amount is added, the contact at A is broken. If too much is added, contact is made at B, thus indicating an overweight condition. If the contents of the bowl are to weigh 18 lb ? 0:25 lb, specify dimensions h and d, spring stiffness k, and the unstretched length of the spring L0. The bowl and the platform on which it rests have a combined weight of 5 lb. Assume the scale has guides or other mechanisms so that the platform on which the bowl rests always horizontal.
A stream with a flow of 22 mgd contains 180 mg/L of sodium cyanide in the form of NaCN. Chlorine can be added to destroy the NaCN waste according to the reaction shown below. Find the theoretical minimum amount of chlorine required (in lb/day).
A mass of .525g of NaCl has been added to a cylinder containing water. The cylinder diameter is 1.5in and depth of water in 5inches. Determine the concentration of the sodium ion in solution, showing your ans in units of a) mg/L b) mass % and c) m..
A Pelton wheel located at an elevation of 200.0 m is sued to extract power from a reservoir at an elevation of 800.0 m. A penstock 1500 m long and 0.8 m in diameter connects the reservoir and nozzle of the Pelton wheel.
If both tanks are well-mixed and remain at constant volume, what is the steady-state concentration (in mg/L) of chromate (CrO42-) in the effluent water leaving the second tank?
A family of six in a five bedroom house would like to treat their wastewater in an onsite septic system, constructed wetland, and tile drainage (leach field) system. They will be generating a maximum of 1.2 m3/d of septic tank effluent.
A 200ft length of steel wire is to carry a tensile load of 340lb. Find the minimum acceptable wire diameter if the maximum allowable stress in the wire is 30ksi, and the lengh of the wire must not increase by more than 2 inches when there is no ch..
Determine the percent error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5 degrees, 10 degrees, and 20 degrees. Explain the qualitative difference between the sine and tangent results
A rectangular channel 2.0 m wide carrying a discharge of 2.5 m3/s is to be fitted with a weir at its downstream end to provide a means of flow measurement as well as to cause heading-up of the water surface.
The maximum gage pressure is known to be 8MPa in a spherical steel pressure vessel having a 250mm diameter and a 6mm wall thickness. Knowing that the ultimate stress in the steel used is (sigma u)= 400MPa, determine the factor of safety with respe..
A CMFR is to be designed to remove contaminant A from water with a steady-state efficiency of 95 percent. The decay reaction is zeroth order, with a rate constant of 0.1M/h. The inlet concentration of A is 0.5 M.
The truck is driving onto the stationary barge at the speed of v1. The masses of the truck and the barge are m and M, respectively. The barge is free to move on the water and the water resistance is to be ignored.
Design a single angle strut connected to a gusset plate to carry 180k n factored load. The length of the strut between center to center intersection is 3m.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd