Explain whether or not if the wire will fracture

Assignment Help Civil Engineering
Reference no: EM13320724

Consider a tensile test on polycrystalline copper which has a yield strength of 20,000 PSI and a tensile strength of 40,000PSI. The engineering strain at maximum load in a tensile test was 25%. A 200 pound force is applied to a 0.1inch diameter copper wire.

Explain whether or not if the wire will fracture?

Reference no: EM13320724

Questions Cloud

Estimate the values of the spring constant : The suspension system of a 1800 kg automobile "sags" 14 cm when the chassis is placed on it. Estimate the values of the spring constant
By how much does the car body rise on its suspension : A 1000 kg car carrying four 84 kg people travels over a %u201Cwashboard%u201D dirt road with corrugations 3.8 m apart, by how much does the car body rise on its suspension
Determine the change in length and the change in diameter : The acrylic plastic rod is 200mm long and 15mm in diameter. If an axial load of 300N is applied to it, determine the change in its length and the change in its diameter. Ep = 2.70 GPa, Vp = 0.4.
Determine the tension in each wire that are attached : A horizontal circular plate weighing 60-lb is suspended from three wires that are attached to a support at D and form 30 degree angles with the vertical. Determine the tension in each wire.
Explain whether or not if the wire will fracture : Consider a tensile test on polycrystalline copper which has a yield strength of 20,000 PSI and a tensile strength of 40,000PSI. The engineering strain at maximum load in a tensile test was 25%.
Psychological statistics : Psychological Statistics
The simple linear regression model : Where y∗i = a1 · yi + a2, for i = 1, ..., n, and a1 and a2 are known positive constants?
Determine if the as-drawn wire will break during the process : A 3105 Aluminum alloy wire is to be drawn to give a 1-mm diameter wire having a yield strength of 20,000 PSI. assume that there is no friction in the wire drawing process
Senior executives at large corporations : A BusinessWeek/Harris survey asked senior executives at large corporations

Reviews

Write a Review

Civil Engineering Questions & Answers

  Check whether the pressure is adequate for service

If the elevation of the pipeline at the treatment plant is 125 m, estimate the pressure in the pipeline 1 km downstream where the elevation if 110 m. Hint: Use the Colebrook equation to estimate f, and the energy equation to estimate P2 .

  F-m ration for conventional activated sludge plant

A 4000-m 3 /day conventional activated sludge plant has an influent with a BOD5 of 190 mg/L and SS of 225 mg/L. What population would this plant serve?

  Determine selling price that yields effective annual return

Five $1,000 bonds having a bond rate of 8% per year payable quarterly are pur chased for $4,940 and kept for 6 years, at which time they are sold. Determine the selling price that yields a 6% effective annual return on the investment.

  Projectile shot vertically upward

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Calculate the final temperature of xe in degree c

Two m^3 of xenon(Xe) are contained in a closed rigid tank at 70 degree C and 2 bar. The tank is heated to a pressure of 10 bar. Assuming that Xe behaves like an ideal gas with a specific heat ration of 1.7

  What would be the magnitude of the mahor principal stress

A normally consolidated clay soil has angle of friction = 20 degrees and effective stress angle of friction = 28 degrees. If a consolidated undrained test is conducted on this clay with an all around pressure of 21.5 lb/in^2

  Determine the detention time of the first pond

Three completely mixed stabilization ponds are connected in series, and the system removes 99.998% from the total coliform count of the influent to the first pond. In stabilization ponds, coliform bacteria are removed by a first-order process

  Plot the do from point of discharge to 20 days downstream

The river characteristics just upstream of the wastewater discharge are: flow = 7.5 m3/s, BOD = 5.5 mg/L, DO = 90% of saturation, and temperature = 25oC. For this water, kd = 0.18 d-1 and kr = 0.22 d-1.

  How far will the truck travel before coming to a stop

It was observed that the truck traveled a distance of 120 ft after the brake was engaged before coming to a complete stop. If instead the driver brings the truck to a velocity of 90 mph and completely engages the brake

  Determine what effect would water have on the foundation

A water pipe, in diameter id located in a trench 450mm below the center of the slab. The trench running along the length of the slab,300mm wide and 450mm deep, was backfilled with the same soil. If this pipe were to leak, what effect would it have..

  Which alternative is inferior in the ford costs for two year

investing in the General Motors costs $10,000 today and pays back $11,500 two years from now. If investing in the Ford costs $8,000 today and pays back $4,500 each year for two years, which alternative is inferior

  How much does she get to keep after paying off the loan

A year after buying her car, Anita has been offered a job in Europe. Her car loan is for $15,000 at a 9% nominal interest rate for 60 months. If she can sell the car for $12,000, how much does she get to keep after paying off the loan

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd