Explain the vapour was less than the surrounding

Assignment Help Chemistry
Reference no: EM13312240

If the actual pressure of the vapour was less than the surrounding , will molecular weight you determine (heptane) be too low or too high? explain?

Reference no: EM13312240

Questions Cloud

Explain and compare the ph values in the dilution : Compare the pH values in the dilution experiment for each of the acids and bases used to the pH detemined for distilled water.
How to calculate the number of grams of naoh : Calculate the number of grams of NaOH per 100ml to give a pH8.0 solution if pure water at pH7.0 is used in the experiment. Repeat this calculation for a pH6.0 solution using HCl.
Estimate the work done by the bungee cord : A simulated bungee jumper falls off a ledge. The plot below shows the force the bungee cord exerts on the jumper as a function of distance from the ledge. estimate the work done by the bungee cord
How many tubes will the calandria require to concentrate : Sodium hydroxide solution is to be concentrated from 10% to 30% by weight using a single effect evaporator operating at atmospheric pressure, The liquid circulates through a calandria consisting of 1 m long tubes 32 mm OD and 28 mm ID.
Explain the vapour was less than the surrounding : If the actual pressure of the vapour was less than the surrounding , will molecular weight you determine (heptane) be too low or too high
Find the distance between the astronomers and the moon : The during an Apollo moon landing, reflecting panels were placed man the moon. find the distance between the astronomers and the moon
Which operation is carried out at atmospheric pressure : Benzene is to be absorbed from coal gas by means of a wash oil. The inlet gas contains 3% by volume of benzene, and the exit gas should not contain more than 0.02% benzene by volume.
What is the pattern in the optimal allocation : What are the optimal production quantities for the company? What is the pattern in the optimal allocation?
What is its coefficient of linear expansion : If material increases its length by 4.2% when its temperature is raised 40 degrees C, then what is its coefficient of linear expansion

Reviews

Write a Review

Chemistry Questions & Answers

  Compare the stabilities of each of the four conjugate bases

compare the stabilities of each of the four conjugate bases that would be formed from the doprotonation of the four different OH groups and determine which of hte OH is most acidic.

  Evaluate the final temperature of the gas

Estimate the final temperature of the gas if 58g of air at 25 degrees Celsius and 50 bar undergoes a Joule-Thomson throttling to a final pressure of 1 bar. Assume the Joule-Thomson coefficient is independent of temperarture and pressure.

  Define the density of titanium

the density of titanium is 7.51 g/cm^3. What is the volume (in cubic inches) of 3.5 lb of titanium?

  Explain what is the wavelength of the incident radiation

If a molecule having an ionization energy of 10.51 eV produces a photoelectron having a kinetic energy of 7.01676E-19 J, what is the wavelength of the incident radiation?

  Arrange elements in order of decreasing ionization energy

Arrange the elements in order of decreasing ionization energy N MG O F Al

  Explain maleic anhydride reacts with ethylene glycol

Maleic anhydride reacts with ethylene glycol to produce an alkyd resin

  Define the structure of the substrate in the reaction

Sn2 reactions occur at different rates depending on the structure of the substrate in the reaction . Would an Sn2 reaction occur at a faster rate on a primary or a tertiary substrate ? Briefly. Explain your answer

  Define the solution at the equivalence point

There is a titration of 25.00 mL. The equevalence point is reached after 18.50 mL of 0.171 M HCl has been added . What is the initial concentration of ammonia in the solution? what is the pH of the solution at the equivalence point

  Explain what effect will increasing the temperature

Consider the following reaction at equilibrium. What effect will increasing the temperature have on the system. Fe3O4(s) + CO(g) 3 FeO(s) + CO2(g) ?H°= +35.9 kJ

  Explain what is the apparent mass of a protein

protein used as standards on an SDS- polyacrylamide gel are 0.80 and 0.41, respectively. What is the apparent mass of a protein having a mobility of 0.62 on this gel?

  Explain sebacoyl chloride hexane on top

layered 20 mL of 2% sebacoyl chloride (decanedioyl chloride)/hexane on top of the aqueous solution. And then we used forceps to draw the solid that forms at the interface A(nylon) into a thread and wound the thread around a test tube. (It was whit..

  Explain what volume would the air in her lungs expand

A scuba diver with a lung capacity of 5.3L inhales a lungful of air at a depth of 47m and a pressure of 5.7atm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd