Explain the difference between materials considered to have

Assignment Help Civil Engineering
Reference no: EM13321281

Explain the difference between materials considered to have "homogeneous" and "isotropic" material properties. Give examples of materials that are considered isotropic but not homogeneous and others that are considered homogeneous and anisotropic.

Reference no: EM13321281

Questions Cloud

Find the rate at which the electric field changes : Determine the rate at which the electric field changes between the round plates of a capacitor, 5.6 cm in diameter
Determine maximum tensile and compressive bending stresses : A rectangular tube has an outside dimensions that are 2in wide and 4in deep and a wall thickness of 0.25in. The tube is acted on by a bending moment of 12,000lb-in.
Find the net work done on the block : A 5kg block initially at rest is pulled to the ight along a horizontal surface by a constant, force of 30N acting at 53 degrees above the horizontal. Find the net work done on the block
What is the present value of $250 to be paid in two years if : As an example of how the present value concept can be used, let s assume that you just hit the $20 million jackpot in a lottery, which promises you a payment of $1 million for the next twenty years. You are clearly excited, but have you really won $2..
Explain the difference between materials considered to have : Explain the difference between materials considered to have "homogeneous" and "isotropic" material properties. Give examples of materials that are considered isotropic
Determine size of proportioning pump to feed ferric chloride : Determine the size (liters/hour) of a proportioning pump to feed ferric chloride for a 0.438 m^3/s water treatment plant. The optimum dose selected is 50 mg/L.
What was the mass of the piece of iron : If a piece of irion (c=450 J/ kg C) at 65 C is dropped into 0.250 kg of ethyl acohol at 25 C and the final temperature of the two comes to 35 C what was the mass of the piece of iron
A chemical reaction for reduction of dissolved o2 by sulfite : In some industrial processes, sulfite is added to remove dissolved O2 to prevent corrosion of pipes. Write the balanced overall chemical reaction for reduction of dissolved O2 by sulfite (SO32-).
Theory suggests that monetary policy may affect investment : During the Great Depression, Tobin"s q A) rose dramatically, as did real interest rates.fell to unprecedentedly low levels.

Reviews

Write a Review

Civil Engineering Questions & Answers

  How to compute the elevation of points at stations

Tabulate station elevations for a 200-ft equal-tangent parabolic curve with g1= -1.25%, g2= +1.25%, VPI station = 146+00, and VPI elevation = 1,895.00 ft. Compute values if stakeout is at 30-ft increments. Check by second differences

  Discuss the advantages and disadvantages of 8-bit adc

Discuss the advantages and disadvantages of using 8-bit and 10-bit resolution for the analog-to-digital converter.

  Find steady state concentration of pollatant in the lake

fator dumps 5m^3/s of nonconservative waste with concentration 100mg/l into the lake. the pollutant has a reation rate coefficient K of 0,23/day assuming the pollutant is well mixed in the lake, find steady state concentration of pollatant in the ..

  Determine the minimum distance from the diversion

A temporary diversion has been constructed on a highway of +4 percent gradient due to major repairs that are being undertaken on a bridge. The maximum speed allowed on the diversion is 10 mph.

  What is the highest possible design speed for the curve

design a horizontal curve for a two-lane road. The road has 12-ft. lanes. Due to expansive excavation, it is determined that a maximum of 34 ft. can be cleared from the road's centerline toward the inside lane to provide for stopping sight distanc..

  Determine the distance between the stations brought to rest

A train starts from rest at station A and accelerates at 0.5m/s^2 for 60s. Afterwards it travels with a constant velocity for 25min. It then decelerates at 1 m/s^2 until it is brought to rest at station B.

  Determine the load p if the total elongation of the system

A 0.25 in diameter copper rod BC is securely attached between two identical 1 in diameter steel rods (AB and CD). Find the load P if the total elongation of the system is measured to be 0.0312 in. Esteel= 29,000ksi, Ecopper=17,000ksi.

  Find the final temperature and the amount of work

Air can be assumed as a di-atomic ideal gas. Find the final temperature and the amount of work ( in kW) required for air compression at a rate of 100 mol/s , from an initial condition of 1 bar an 25 C to 10 bar; for the following ways.

  Calculate air velocity and mass flow rate through the slit

the room described in problem 8.1 gas a 1 m wude door with a 1 cm high slit at the floor level. THe oil spill has a rectagular area of sides 0.5 m by 0.5 m. (a) calculate the pressure increase, the air velocity, and the mass flow rate throug the sl..

  Calculate mass of sludge wasted each day for sludge system

A wastewater treatment plant has a flow of 35,000 m3/day. Calculate the mass of sludge wasted each day (QwXw, expressed in kg/day) for an activated-sludge system operated at a solids retention time (SRT) of 5 days

  Balancing of reciprocating engines

If the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the connection rod to be of infinite length.

  Determine the concentration in weight percent of v

Iron and vanadium both have the BCC crystal structure, and V forms a substitutional solid structure in Fe for concentrations up to approximately 20 wt% V at room temperature.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd