Explain aliquot was treated with hexamethylenetetra

Reference no: EM13520873

Chromel is an alloy composed of nickel, iron and chromium. A 0.7176g sample of the alloy was dissolved in HNO3 and diluted to 250ml in a volumetric flask. A 50ml aliquot of this sample, treated with pyrophosphate to mask Fe and Cr, required 26.24ml of 0.05831 M EDTA to reach the endpoint. A second 60ml aliquot was treated with hexamethylenetetra to mask the Cr. Titrating with 0.05831M EDTA required 40.35ml to reach the end point. Finally, a third 60ml aliquot was treated with 50ml 0.05831 M EDTA and back titrated to the end point with 7.21ml of 0.07316M Cu2+. what are the weights of Ni, Fe and Cr in the alloy

Reference no: EM13520873

Questions Cloud

Evaluate the rotational partition function of ch4 : Calculate the rotational partition function of CH4 (a) by direct summation of the energy levels at 298K and 500K, and (b) by the high temperature approximation. Take B= 5.2412 cm^-1

Find at what rate is the current in it changing : A 4.6mH toroidal inductor has 150 identical equally spaced coils. If it carries an 12.0A current, at what rate is the current in it changing

Explain nh4cl be raised to form detectable nh3 : It is possible to detect NH3 gas over 10^-2 M NH3. To what pH must .1 M NH4Cl be raised to form detectable NH3

What is the rate of heat generated in the battery : A battery of internal resistance r = 0.2 ohms and emf = 12.0 V is connected to a device with resistance R = 6.0 ohms. What is the rate of heat generated in the battery

Explain aliquot was treated with hexamethylenetetra : A 50ml aliquot of this sample, treated with pyrophosphate to mask Fe and Cr, required 26.24ml of 0.05831 M EDTA to reach the endpoint. A second 60ml aliquot was treated with hexamethylenetetra to mask the Cr.

Determine the maximum angular magnification : A farsighted person can read printing as close as 25.0 cm when she wears contacts that have a focal length of 37.4 cm. What is the maximum angular magnification that the magnifying glass can provide for her

How to calculate the ph at of the points : A 3.50g sample of histidine dihydrochloride (fw 228.08g/mol) in water and diluting to a final volume of 50.00ml. The resulting solution is then titrate with 0.500M NaOH. calculate the pH at each of the following points

Compute the distance between the two slits : Two narrow slits are illuminated by a laser with a wavelength of 581nm. Calculate the distance between the two slits

Explain what is the molar concentration of h2so4 : A 10.0 mL sample of aqueous H2SO4 requires 24.32 mL of 0.134 M NaOH to reach the endpoint. What is the molar concentration of H2SO4. First write the equation for the reaction.

User Account

All Pages