Explain acetic acid and nanopure water

Assignment Help Chemistry
Reference no: EM13296386

Prepare 2.0 L of 0.02 M acetic acid from 4.0 M acetic acid and nanopure water. How many L or mL do you need to make this

Reference no: EM13296386

Questions Cloud

By how much should the stock go down on the ex-dividend date : Based solely on the impact of the cash dividend, by how much should the stock go down on the ex-dividend date? What will the new price of the stock be?
What happens if the block is immersed in carbondisulfide : A light ray of wavelength 589 nm is incident at an angle ? on the top surface of a block of polystyrene surrounded by air. What happens if the block is immersed in carbondisulfide
Obtain the work done on the jet by the catapult : A fighter jet is launched from an aircraft carrier with the aid of its own engines and a steam-powered catapult. obtain the work done on the jet by the catapult
Determine the values of the two resistors : When two unknown resistors are connected in series with a battery, the battery delivers 235 W and carries a total current of 5.00 A. Determine the values of the two resistors
Explain acetic acid and nanopure water : Prepare 2.0 L of 0.02 M acetic acid from 4.0 M acetic acid and nanopure water. How many L or mL do you need to make this
Determine what should be the magnitude of the load p2 : A second load P2 is uniformly distributed around the cap plate at B. The diameters and thicknesses of the upper and lower parts of the post are dAB= 1.25 in, tAB= 0.5 in, dBC= 2.25 in and tBC= .375 in respectively.
What is the value per share of the company stock : The required rate of return on the stock, rs, is 17%. What is the value per share of the company's stock? Round your answer to the nearest cent.
How fast is the star moving with respect to earth : Light of wavelength 659.4 nm is emitted by a star. The wavelength of this light as measured on Earth is 661.4 nm. How fast is the star moving with respect to Earth
Explain how many liters of water are required to dilute : How many liters of water are required to dilute 6.23mL of 12.2M HClO4 to make a solution with a pH of 2.34? Write your answer as 1.2E1L

Reviews

Write a Review

Chemistry Questions & Answers

  Explain what is the mass percent of aluminum in the alloy

A 4.00 g sample of an aluminum-copperalloy reacts with excess hydrochloric acid. The 2.81 L of H2(g) produced is collected over water at a barometric pressure of 758.4 mmHg and 19°C. What is the mass percent of aluminum in the alloy

  Calculate the actual neutralizing capacity of the antacid

If 0.500 g of antacid was added to 50.00 mL of 0.100 M HCL and 5.65 mL of 0.100 M NaOH was required to titrate the un-neutralized HCL, calculate the actual neutralizing capacity of the antacid in mmol H+ per gram.

  Find relationship between vapor pressure and temperature

The vapor pressure of a liquid is the pressure exerted by its vapor when the liquid and vapor states are in equilibrium. The relationship between vapor pressure and temperature is expressed by the Clausius-Clapeyron equation.

  How many equivalents of kbr moles relative to acetanilide

how many equivalents of KBr moles of 0.00416 relative to acetanilide moles of 0.00381 are used in this reaction

  State what is the partial pressure of he in a container

What is the partial pressure of He in a container that is at a total pressure of 2.33 atm and contains

  How much phosphoric acid (h3po4) will be produced

Suppose the reaction Ca3(PO4)2 + 3H2SO4 ------ > 3CaSO4 + 2H3PO4 is carried out starting with 103 g of Ca3(PO4)2 and 33.7 g of H2SO4. How much phosphoric acid (H3PO4) will be produced?

  Define the cpm of the vapor and liquid phases

Benzene (l) has a vapor pressure of 0.1269 bar at 298.15 K and an enthalpy of vaporization of 30.72kJmol^-1. The Cpm of the vapor and liquid phases at that temperature are 82.4 and 136.0 J K^-1 mol^-1, respectively. Calculate the vapor pressure of..

  Explain molecules are mobile in a gas and some reactions

Molecules are mobile in a gas and some reactions can be run in the gas phase. Give several reasons solutions are preferable for synthetic reactions.

  Explain the difference in the mercury levels in the two arms

A closed-end manometer was attached to a vessel containing argon. The difference in the mercury levels in the two arms of the manometer was 11.8 cm. Atmospheric pressure was 783 mm Hg. The pressure of the argon in the container was __________ mm H..

  How much gold is present in the sample

a 365.0g sample of water,contains 23mg Au. How much gold is present in the sample in parts per million?

  Explain an absorbing solution yielded a response

A portable photometer with a linear response top radiation registered 83.2 microamps with a blank solution in the light path. Replacement of the blank with an absorbing solution yielded a response of 451 microamps calculate

  Explain many kilojoules are needed to raise the temperature

How many kilojoules are needed to raise the temperature of 125 g of copper from 22 deg C to 325 deg C? My book shows copper at 0.385 j/g. Here is what I have done so far but I am not sure? 125 g x 303 deg C x 0.385 j = 14600. j 14600/1000 = Conver..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd