Explain a raw wastewater is to be treated chemically

Assignment Help Chemistry
Reference no: EM13278097

A raw wastewater is to be treated chemically for the removal of total suspended solids and phosphorus through coagulation, flocculation, and sedimentation. The wastewater characteristics are as follows: Q = 0.60 m3/s Orthophosphorus = 9.0 g/m3 as P Alkalinity = 150 g/m3 as CaCO3 pH = 6.8 Influent TSS = 180 g/m3 Alum dose = 140 mg/L as Al2(SO4)3*14H2O Sludge water content = 97% Sludge specific gravity = 1.02 Determine the sludge production in kg dry wt/d and in m3/d and estimate the alkalinity remaining in solution (or needed as an amendment) in mg CaCO3/L assuming the following conditions: 100% removal of orthophosphate as insoluble AlPO4 90% removal of influent TSS All alum not required for reaction with phosphate forms insoluble Al(OH)3*3H2O(s) All Al(OH)3*3H2O(s) formed is captured in the sludge

Reference no: EM13278097

Questions Cloud

Write vhdl code for the sequential circuit : a sequential circuit has one input (X) and one output (F). The circuit examines groups of four consecutive inputs and produces an output F=1 if the input sequence 0101 or 1001 occurs. The circuit resets after every four inputs.
Explain conduct electrical current equally well : Which pair of solutions should conduct electrical current equally well because they contain equal numbers of ions? 0.10 M NH3 and 0.10 M NH4Cl 0.10 M HBr and 0.10 M HF 0.10 M NaCl and 0.10 M Na2SO4 0.10 M NaNO3 and 0.10 M HNO3 0.10 M HNO3 and 0.10..
Determine the specific gravity of the other fluid : A bottle has a mass of 31.00g when empty and 97.94g when filled with water. what is the specific gravity of the other fluid
How much capacitance should add in series to bring power : When you get to work one day you see that the station is delivering 6.0 MW of power with a power factor cosf=0.9. What is rms current. How much capacitance you should add in series to bring the power factor to 1.0. How much power the station will b..
Explain a raw wastewater is to be treated chemically : A raw wastewater is to be treated chemically for the removal of total suspended solids and phosphorus through coagulation, flocculation, and sedimentation. The wastewater characteristics are as follows: Q = 0.60 m3/s Orthophosphorus = 9.0 g/m3 as ..
Explain the reaction was accelerated considerably : Two students were carrying out an Sn2 reaction between 1-chloro-3-methylbutane with sodium methoxide, which is relatively slow. When they added sodium iodide, the reaction was accelerated considerably. How is this catalysis best explained
Explain what is the minimum volume of water required : How much benzoic acid should be formed and will it be pure (in theory)? Is 50mL of water an appropriate volume for this procedure. If not, what is the minimum volume of water required? Use calculations to aid in your explanation.
How many states are in the count sequence of an n-bit switch : A switch-tail counter uses the compliment of the serial output of a right-shift register as its serial input. (a) Starting from an initial state of 000, list the sequence of states after each shift until the register returns to 000.
Find the average power developed by the engine : A 1.50 ? 103-kg car starts from rest and accelerates uniformly to 16.5 m/s in 12.4 s. Find the average power developed by the engine

Reviews

Write a Review

Chemistry Questions & Answers

  Define the dialyzing bag is then immersed in distilled water

The dialyzing bag is then immersed in distilled water. Which of the following actions should be taken to remove the most salt from the mixture? Leave the bag in the distilled water for an extended period of time, Replace the dialyzing bag periodic..

  Compute the mol mg/mol hcl ratio for the reaction

strip of magnesium reacts in 3.0 mL of 5.0 M HCl over a given period of time. Evaluate the mol mg/mol HCl ratio for the reaction.

  How many kilojoules of energy are required

The specific heat of ethanol is 2.44j/g times degrees celcius. How many kilojoules of energy are required to heat 50.0 g of ethanol from -20.0 degrees celcius to 68.0?

  Compute the average and standard deviation

a calculator to calculate the average and standard deviation for x1 through x12. i know how to find the average but i dont understand how to findthe standard deviation.

  Explain the solution be acidic and neutral or basic

Consider a 0.53 M solution of each of the following salts in distilled water. Will the solution be acidic, neutral, or basic? You may need to reference a table of Ka and Kb Tables values

  Calculate the mole fraction of the salt in the solution

Calculate the mole fraction of the salt in the solution.

  Prepare a buffer solution that has a ph

How many grams of dry NH4Cl need to be added to 2.00 L of a 0.600 M solution of ammonia, NH3, to prepare a buffer solution that has a pH of 8.89?

  What is the gas mileage in

If an automobile is able to travel 246 on 10.6 of gasoline, what is the gas mileage in ?

  State building block for synthetic fibers and plastics

Acrylonitrile is an important building block for synthetic fibers and plastics. Over 2 billion pounds of acrylonitrile are produced in the United States each year.

  What mass of barium is produced when molten barium chloride

What mass of barium is produced when molten barium chloride is electrolyzed by a current of 2.50 x 10^5 A for 6.00 hours

  Explain what is the volume of nh3

What is the volume of NH3 produced in the following reaction when 3.0 L of N2 reacts with 4.0 L of H2? N2 (g) + 3H2 (g) -> 2NH3(g)

  Compute the molar mass of the compound

The freezing point of pure benzene is 5.48 degrees Celcius, and Kf for benzene is 5.12 degrees C/m. Calculate the molar mass of the unknown compound.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd