Evaluate the spread and depth at the curb

Assignment Help Civil Engineering
Reference no: EM13343786

Question 2: (a) A combination gutter section has the dimension W = 0.5 m, SL = 0.008 m/m, Sx= 0.02 m/m, and a = 0.05 m. The Manning roughness factor is 0.016. Determine the discharge in the gutter if the spread is 2.0 m. Estimate the flow intercepted by the curb opening inlet placed in the composite gutter if the inlet length is 1.75m. 

(b) Evaluate the spread and depth at the curb for a triangular gutter section carrying a design discharge of 0.09m3/s and having a uniform cross slope of 0.022m/m, Manning’s roughness of 0.015, and longitudinal slope of 0.014m/m. 

Reference no: EM13343786

Questions Cloud

Mediator approach for gun prohibition case : How would you as a mediator approach for Gun Prohibition Case Outline a plan for conducting the mediation and avoiding pitfalls.
Human services worker integrate the use of mediation : How does a human services worker integrate the use of mediation, or third party neutrality, when he or she also serves as an advocate for the client and is an employee of the agency?
What are the common negotiation pitfalls : What is negotiation? What are the common negotiation pitfalls? What are the strategies to overcome them?
Benefits and potential problems associated with conflict : Using a practical example, what are the benefits and potential problems associated with conflict?
Evaluate the spread and depth at the curb : Evaluate the spread and depth at the curb for a triangular gutter section carrying a design discharge of 0.09m3/s and having a uniform cross slope of 0.022m/m, Manning’s roughness of 0.015, and longitudinal slope of 0.014m/m.
Variety of interesting somatoform : In this chapter the textbook covers a variety of interesting somatoform and dissociative disorders. For our discussion this week I would like to pay close attention to the diagnosis of Dissociative Identity Disorder (DID). Many of us have seen movies..
Determine the peak outflow rate : Determine the peak outflow rate when the following inflow hydrograph is routed through this basin. What is the design storage and water surface elevation at the peak outflow rate.
Work for a presidential candidate in the next election. : You decide to go to work for a presidential candidate in the next election. You think that the way for you to get folks to vote for your candidate is to use some psychology. So, you make a deal with a soft-drink company to insert a picture of your ca..
Element has greater influence over our bodies physiology : The psychological (and mental) element has greater influence over our bodies physiology. Do you agree or disagree.

Reviews

Write a Review

Civil Engineering Questions & Answers

  How variation in water elevation can result in consolidation

Briefly explain how variation in water table elevation can result in overconsolidation of a soil and list oehr possible mechanisms that cause over consolidation of soils.

  Determine the angular velocity of bar ab at displacement

Slider A moves in the horizontal slot with a constant speed v = 1.90 m/s for a short interval of motion. Determine the angular velocity of bar AB if the displacement xA = 90 mm, and the length L = 440 mm.

  Compute the resisitivity at a reservoir depth of 8000 feet

Given the total dissolved solids in a brine is 20,500 ppm, compute the resisitivity at a reservoir depth of 8,000 feet.

  What mass of dissolved oxygen would be required to degrade

If 90% of the weight of this brown sugar is sucrose (C12H22O11), what mass of dissolved oxygen would have been required to degrade this mass of sucrose had some not been recovered from the barge prior to its dissolution and dispersion into the riv..

  Find what is the fluid velocity ft per day in the aquifer

Two monitoring wells were constructed in an unconfined aquifer. The wells are separated by a distance of 250 ft. The water surface elevations in the up-gradient and down-gradient wells were 101.00 and 100.85 ft, respectively.

  Determine the largest allowable length of the aluminum bar

Using the aluminum alloy 2014-T6, determine the largest allowable length of the aluminum bar AB for a centric load P of magnitude (A) 150 kN b=50 mm h=20 mm

  Compute unit weight under conditions when sand is dry

A sand with Gs=2.66 and e=0.60 is completely dry. It then becomes wetted by a rising groundwater table. Compute the unit weight under the following conditions: a.) when the sand is completely dry

  Compute and plot the water surface profile upstream of lake

A rectangular channel leading from an upstream lake has a bottom width of 20 ft, bottom slope of 0.0002, a Manning roughness factor of 0.016, a discharge of 403 cfs, and normal depth of 6.24 ft.

  Find how much must be deposited now if the fund will earn

The maintenance costs begin in 31st year at $300,000 annually. How much must be deposited now if the fund will earn 5% interest. How much does this change if the interest rate is 4%

  Why compressive strength of concrete is imporatant property

Assuming that the aggregate has negligible absorption, calculate the temperature of the fresh concrete. Also calculate how much ice is required to reduce the temperature of the fresh concrete to 61 ºF.

  Which alternative is inferior in the ford costs for two year

investing in the General Motors costs $10,000 today and pays back $11,500 two years from now. If investing in the Ford costs $8,000 today and pays back $4,500 each year for two years, which alternative is inferior

  Determine that building solution complies with requirements

In accordance with BCA, what are the assessment methods and how may they be used to determine that a building solution complies with the performance requirements

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd