Estimate the supply pressure required at the flow rate

Reference no: EM13318670

Water, at volume flow rate Q=20 L/s, is delivered by horizontal fire hose and nozzle assembly. The hose (L = 100m, D = 75 mm, and e/D = .004) is made up of five 20 m sections joined by couplings. The entrance is squared edged; the minor loss coefficient for each coupling is Kc = 0.5, based on mean velocity through the hose. The nozzle loss coefficient is Kn = .02, based on velocity in the exit jet, of D2 = 25 mm diameter. Assuming the water temperature is 15 degrees C, estimate the supply pressure required at this flow rate.

Reference no: EM13318670

Questions Cloud

Explain a salt dissolves in water to form a green solution : A salt dissolves in water to form a green solution. A precipitation is formed when the aqueous solution is treated with buffer NH4C/NH3 and thioacetamine.

What stack height should be used to assure concentrations : A paper plant is proposed for a location 1 km upwind from a town. It will emit 40 g/s of hydrogen sulfide, which has an odor threshold of about 0.1 mg/m 3. Winds at the effective stack are typically 4 m/s blowing toward the town.

Define compound liberates a gas when treated with c2h5mgbr : Identify the following compound from its IR and proton NMR spectra. C4H6O: NMR: ? 2.43 (1H, t, J = 2 Hz); ? 3.41 (3H, s); ? 4.10 (2H, d, J = 2 Hz) IR: 2125, 3300 cm-1 The C4H6O compound liberates a gas when treated with C2H5MgBr.

Describe the method of undertaking an anemometer traverse : Calculate the volumetric flow rate and the mass flow rate assuming that the air has a density of 1.2 kg/m3 and describe the method of undertaking an anemometer traverse for a mine airway

Estimate the supply pressure required at the flow rate : Water, at volume flow rate Q=20 L/s, is delivered by horizontal fire hose and nozzle assembly. The hose (L = 100m, D = 75 mm, and e/D = .004) is made up of five 20 m sections joined by couplings

Identify an opinion possess on a specific social : Identify an opinion you possess on a specific social, political, or educational issue.

What is the mass flow rate of the refrigerant in kg per s : A vapor-compression refrigeration system, using Refrigerant 134a as the working fluid, has evaporator and condenser pressure of 1.4 bar and 12 bar, respectively.

Explain the compound diethl ether : On a IR Spectrum chart, where would the one or two absorptions be located that distinguish the compound Diethl Ether

What is turbine work output per kilogram of steam circulated : Steam enters the turbine of a single vapor power plant with a pressure of 10 MPa and a temperature of 580 C and expands adiabatically to 6 kPa. The isentropic turbine efficiency is 85%.

User Account

All Pages