Estimate the flow rate when draw down at the well

Assignment Help Civil Engineering
Reference no: EM13324233

A fully penetrating well of 30 cm diameter in an unconfined aquifer of saturated thickness 50 m was found to give the following draw down - discharge relationship under equillibium condition. If the radius of influence of the well can be assumed to be proportional to the discharge through the well, estimate the flow rate when draw down at the well is 6.0 m.

When draw-down at well is 3.0 m, then discharge is 600

when draw-down at well is 11.7 m, then discharge is 1800

Reference no: EM13324233

Questions Cloud

Find the distance between the second and third dark lines : Two slits spaced 0.410mm apart are placed a distance of 71.0cm from a screen. What is the distance between the second and third dark lines of the interference pattern on the screen
How would a capital budgeting constraint : In general, how would a capital budgeting constraint on the available amount of investment influence these decisions?
Explain molecular solids and which are covalent solids : Which of the following are molecular solids and which are covalent solids. SO2, I2, P4, S8, H2O, SiO2
Explain what will happen to this affective rate : What effective annual interest rate does the firm earn when a customer does not take the discount? Without doing any calculation, explain what will happen to affective rate
Estimate the flow rate when draw down at the well : A fully penetrating well of 30 cm diameter in an unconfined aquifer of saturated thickness 50 m was found to give the following draw down - discharge relationship under equillibium condition.
Explain how many grams of the products are produced : In an acidic solution of HCl. The products are H20, CO2, the Mn (II) ion, and potasium and chloride ions that do not take part in the reaction. A. How many grams of the products are produced by the oxidation of C6H14O3 B. Balance the equation in b..
Calculate energy needed to bring the soil to surface level : We are digging a hole to build a building. Calculate the energy needed to bring the soil to surface level. Remember the sides of the excavation lie at 45 degrees. Else, the whole would be constantly refilling itself.
What is geometric return over this period : Your grandfather invested $1,000 in a stock 27 years ago. Currently the value of his account is $226,000. What is his geometric return over this period?
How far could she long jump on the moon : Neglect air resistance and muscle atrophy and assume the same upward normal reaction force as on earth: how far could she long jump on the moon

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what diameter pipe would be recommend

A circular concrete pipe (n = 0.012) carries a discharge of 450 cfs with a slope of 0.008 and is designed to run no more than 60% full (by depth). What diameter pipe would you recommend

  Find dimension of rectangular concrete channel to carry flow

Find the dimensions of a rectangular concrete channel to carry a flow of 150 m3/s, with bottom slope 0.015, and mean velocity 10.2 m/s.

  Determine the initial specific discharge under the gate

Write out the continuity and momentum equations that govern the surge travelling downstream. (Note: assume that the surge velocity exceeds the water velocity)

  Find the slope necessary to sustain a uniform flow

A flow of 90 cfs is carried in a rectangular channel 10ft wide at a depth of 1.6 ft. If the channel is made of smooth concrete (n=0.016), find the slope necessary to sustain a uniform flow at this depth.

  Determine the minimum required diameter for the machine

Determine the minimum required diameter for this machine member based on direct, compressive stress. The member is to be made of gray cast iron. Use a factor of safety of 6.0 against compression failure.

  Determine the maximum force

two links AB and DE are connected by a bell crank as shown. Determine the maximum force that can be safely exerted by link AB on the bell crank if the maximum allowable value for the reaction at C is 1600N.

  What standard deviation would be expected in a distance

A field party is capable of making taping observations with a standard deviation of +,-0.003m per 30m taped length. What standard deviation would be expected in a distance of 120m taped by this party

  What is the magnitude of the average force exerted

A carpenter uses a hammer to strike a nail. Approximate the hammer's weight of 1.8lbs, as being concentrated at the head, and assume that at impact the head is traveling in the -j direction.

  Cause of pavement damage

On a flexible pavement with a 3 inch hot mix asphalt (HMA) wearing surface, a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(Suppose drainage coefficients are 1.0).

  Determine an optimal production schedule for the month

For each radio produced during months 1 and 2, a $10 variable cost is incurred; for each radio produced during month 3, a $12 variable cost is incurred. The inventory cost is $1.5 for each radio in stock at the end of a month.

  Probability of the functions of car battery

The probability that a new car battery functions for over 10,000 miles is .8, the probability that it functions for over 20,000 miles is .4, and the probability that it functions over 30,000 miles is .1. If a new battery is still working after 10,..

  Calculate the retardation coefficient for the three chemical

Groundwater has been contaminated with three chemicals: benzene (log Kow 2.13), pentachlorobenzene (log Kow 5.03), and naphthalene (log Kow 3.36). The aquifer (rs = 2.3 g/cm3; h = 0.4; foc = 0.02) has a gradient of 0.004 and hydraulic conductivity..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd