User Account

All Pages

Estimate the final ph and the final tds of the mixture

Assignment Help Civil Engineering
Reference no: EM13322612

It has been proposed to mix a 1500 L bath containing 5% by volume of H2SO4 with a 1500 L bath containing 5% by weight of NaOH. The Specific gravity of the acid added is 1.841 and its purity is 96%. The base added is 100% pure. Estimate the final pH and the final TDS (in mg/L) of the mixture of the two baths

Reference no: EM13322612

Questions Cloud

Write a program that swaps the elements of an array pairwise : Write a program that swaps the elements of an array pairwise. Start from the left of the array, take 2 elements at a time and swap the two elements. Continue in this fashion until you reach the end of the array.
Evaluate the pre-equilibrium concentration of fe3+(aq) : Calculate the pre-equilibrium concentration of Fe3+(aq) in a solution made by mixing 2.8 mL of 2.010?3 M Fe(NO3)3 and 7.2 mL of 2.010?3 M NaSCN. Assume the final volume is 10.0 mL.
Which of the following is an invalid wifi standard : Which of the following is an invalid wifi standard?
What is the largest area the counters can take up : you want to put in marble counter tops, but you dont want them to take up more than 1/20 of the space in you kitchen. what is the largest area the counters can take up?
Estimate the final ph and the final tds of the mixture : It has been proposed to mix a 1500 L bath containing 5% by volume of H2SO4 with a 1500 L bath containing 5% by weight of NaOH. The Specific gravity of the acid added is 1.841 and its purity is 96%.
Explain what is the initial pressure of h2s(g) in the flask : An empty 5.00- flask is charged with 0.450g of pure H2S(g) , at 25 degrees celsius What is the initial pressure of H2S(g) in the flask
A single bead can slide with negligible friction on a wire : A single bead can slide with negligible friction on a wire
Explain what effect on the value of ca(oh)2''s ksp : What effect on the value of Ca(OH)2's Ksp (6.5x10^-6 ) would sucking up some suspended calcium hydroxide solid have. Would the Ksp value be higher or lower than the normal value. Why
Determine the components of the reaction at point c : The object ABC consists of two slender rods welded together at point B. Rod AB has a mass of 1 kg and bar BC has a mass of 2 kg. Knowing the magnitude of the angular velocity of ABC is 10 rad/s when thetha is zero.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Draw thermal circuit of heat flow from center of pipe to t

Steam at 100 psia, sat vapor is in a pipe. The pipe is schedule 40 steel with a wall thickness of 1/8 inch and a length of 100 ft. The outside air temperature is 40 degrees Fahrenheit. The mass flow of steam is 4,000 lb/hr.

  Find the temperature stress produced

A rod of steel is 20 m long at a temperature of 200C. find the free expansion of the rod when the temperature is raised to 650C. Find the temperature stress produced

  Parallel tangents of a reversed curve

The perpendicular distance between two parallel tangents of a reversed curve is 20m. The azimuth of the back tangents of the curve is 270 00 and the azimuth of the common tangent is 310.

  Determine station of pvc and pvt and design speed of curve

An equal-tangent crest vertical curve connects a +3.2% and -1.1% grade. The PVI is at station 98+20. Due to drainage considerations, the highest point of the curve is at station 100+79.35.

  Under what condition will both the soil have the same weight

Given Specific Gravity for Soil A is 2.00 and Specific Gravity for Soil B is 4.00, under what condition (Volume of Soil A and Soil B) will both the soil have the same weight

  Calculate the engineering stress for the bar

Calculate the following for the bar:a) engineering stress at 0.001 (0.1%) strain, b) elongation, c) Young's modulus, d) final diameter of the bar Note: Poisson's ratio is 0.31 for 4140 steel, e) true stress, f) true strain.

  Plot height of water in the container as function of time

At the bottom, an opening allows water to drain out at a rate, in lbm/s, that is proportional to H(t), the instantaneous height of water in the barrel, in ft: rate of water leaving from bottom = 9*H(t) .

  At what constant rate would train need to be decelerating

An excursion train, travelling at 80ft/s, encounters a rain shower. The point A lies directly 8ft. beneath the lip of an overhang in the observation car. The raindrops can be assumed to be falling at a constant speed of 40ft/s.

  What will the ammonia concentration be 10 miles downstream

The concentration of ammonia is 6 mg/L at one point in the river. If the first - order decay coefficient for the conversion of ammonia to nitrate is 0.05 day-1, what will the ammonia concentration be 10 miles downstream.

  Compute the effective normal stress acting on a plane

The water table is at a depth of 1 m. Compute the effective normal stress and the shear stress acting on a plane rotated 60 degrees clockwise from the horizontal at a depth of 2.5 m in this deposit.

  Find elastic modulus of material used to construct the wire

Given a type of material used in a wire with diameter (d = 0.25 in) that stretches 2.3 inches while 80 feet of length is under tensile load of 1800 pounds. Find the elastic modulus of the material used to construct the wire.

  Determine the velocity of the solid sphere

A solid steel sphere with a specific gravity of 7.85 and diameter of 0.02 m is falling at its terminal velocity through water at 25 °C. Using either trial-and-error or a graphical approach, determine the velocity of the sphere

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd