Estimate the density of the air at an elevation of 10 km

Assignment Help Civil Engineering
Reference no: EM13315217

Titan, a moon of Saturn, is believed by astronomers to have an atmosphere that is about 95% nitrogen. At Titan's surface the acceleration due to gravity is 1.35 m/s2, the atmospheric pressure is 210 kPa, and the temperature is 94 K. Calculate the density of the "air" at the surface. Assuming an isothermal atmosphere, calculate the scale height and compare it to Earth's. Estimate the density of the "air" at an elevation of 10 km.

Reference no: EM13315217

Questions Cloud

Comput the magnitude of the average force exerted on the car : A(n) 1340 kg car moving with a speed of 16.6 m/s collides with a utility pole and is brought to rest in 0.299 s
Calculate atmospheric pressure head with non-toxic glycerin : A barometer filed with non-toxic glycerin is used to measure standard sea level atmospheric pressure. neglecting the effect vapor pressure and surface tension. calculate the atmospheric pressure head.
What is the density of water vapor in g/m3 : 1) What is the density of water vapor in g/m3 on a hot dry day in the desert when the temperature is 40.0°C and the relative humidity is 16.0%?
Determine the speed of sound in air : The temperature at Furnace Creek in Death Valley reached 134 degrees Fahrenheit on July 10, 1913. What is the speed of sound in air at this temperature
Estimate the density of the air at an elevation of 10 km : Titan, a moon of Saturn, is believed by astronomers to have an atmosphere that is about 95% nitrogen. At Titan's surface the acceleration due to gravity is 1.35 m/s2, the atmospheric pressure is 210 kPa, and the temperature is 94 K.
Determine the beat frequency : A 40.0 cm long organ pipe is filled with air at 0 degrees C and is open at both ends. What is the beat frequency between the fundamental frequencies of the two organ pipes
What is its velocity : A bank robber travelling at 75mi/hr in an escape car suddenly sees a barricade 150 m ahead. The robber slams on the breaks following a 0.75 delay (the drivers reaction time) After the brakes are applied, the car decelerates at 4.2m/s^2. Will th..
Question for database schema : The patient information along with the ID of any prescribing doctor for each patient and the prescription information along with patient name, DOB, medication brand name, and prescribing doctor name sorted by most recent date.
What type of system would you classify an electric wire : A system consists of a gas confined between a cylinder and piston such that work and heat may cross the boundary. What type of system is that. What type of system is a free body as used in mechanics or civil engineering.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What pressure in psi is applied to water to reduce volume

At normal atmospheric conditions, approximately what pressure in psi must be applied to water 70 F to reduce its volume by 2 %

  Determine the probability of failure of the structure

If the load effect has a mean value of 88 kips and a standard deviation of 1.8 kips. If the nominal material strength is 160 kips Determine the followings 1- The probability of failure of the structure under the nominal resistance and service load..

  Dissolved inorganic carbon sample

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

  Determine the discharge of a trapezoidal concrete channel

Determine the discharge of a trapezoidal concrete channel section with a bottom width of 4 ft and side slopes of 2:1. The depth of flow is 5 ft and the channel slope is 0.5%

  What do you mean by the term durability

What do you understand by the term durability? Compared to other considerations, how much importance should be given to durability in the design and construction of concrete structures?

  How high can the hump be made without backing flow up

A smooth hump is placed in the bottom of the channel. What would be the depth of flow over a 3 ft high jump. How high can the hump be made without backing flow up What would be the depth of flow over and just upstream of a 6 ft high jump

  Calculate the depth of flow upstream of the bridge

A bridge has cylindrical piers 1 m in diameter and spaced 15 m apart. Downstream of the bridge where the flow disturbance from the piers is no longer present, the flow depth is 2.9 m and the mean velocity is 2.5 m/s.

  Determine the distance s that the top hoop should be placed

The barrel has an inner diameter of 4ft. Neglect its wall thickness. Assume that only the hoops resist the water pressure. Note: Water develops pressure in the barrel according to Pascal's Law, p=62.4 lb/ft^2, where z is the depth from the surface..

  Calculate the initial head loss through a dual-media filter

The porosity of both media is 0.40, the shape factor for the anthracite is 7.5, and the shape factor for the sand is 6.0. Assume a water temperature of 60 F.

  What is the velocity head expressed in atmospheres

What is the velocity head expressed in atmospheres for a rapid filter operated at a surface loading rate of 475 m/d when the local porosity is 0.40?

  Determine the drag coefficient for the sign type

The pressure on the back side is negative; its magnitude is 0.5 times the (negative) stagnation pressure on the back side. Determine the drag coefficient for the sign type

  Determine the heat transfer assuming process is reversible

he oxygen is compressed from 95 kPa, 20 C to 300 kPa, isothermally. Determine the heat transfer assuming (a) the process is reversible, (b) the process is irreversible such that 20% more work is required than the reversible case.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd