Estimate the bearing angle of the acoustic source

Assignment Help Other Engineering
Reference no: EM131210894

Signal Processing Applications Assignment - Estimation of Range and Bearing Angle

1. Bearing-angle estimation

A passive detection system consists of two acoustic receivers. The separation between the receivers is 2.5 meters. The acoustic propagation speed in air is 343.6 m/s. The acoustic data tracks detected by the receivers are given. The sampling rate of the A/D conversion is 48 MHz. Estimate the bearing angle of the acoustic source.

2. Range estimation

The purpose of this exercise is to perform step-frequency radar imaging using FFT for range estimation.

The data set was taken over a section of the walkway pavement in front of the Broida Hall. The ground-penetrating radar imaging unit scanned along a linear path and took data at 200 spatial positions. The spatial spacing between the data-collection positions is 0.0213 m (2.13 cm).

At each data-collection position, the system illuminates the subsurface region of the walkway area with microwaves in the step-frequency mode, stepping through 128 frequencies with a constant increment, from 0.976 GHz to 2.00 GHz. The relative permittivity εr is approximately 6.0.

The data set is in the form of a (200 x 128) array, corresponding to 128 complex-amplitude values (for the 128 frequencies) at 200 receiving positions.

Your assignment is to perform the image reconstruction of the subsurface profile. Your result should be a two-dimensional image plot (magnitude-only). Please note:

(a) The propagation speed needs to be adjusted by the relative permittivity.

(b) The depth profile needs to be scaled by a factor of two for the round-trip propagation.

(c) The spatial scale of your image profile should be approximately the same, in both directions for effective visualization.

Your report should include (a) a detailed description of your approach and signal processing procedures, (b) resultant image, (c) code, and (d) a summary.

Reference no: EM131210894

Questions Cloud

The pattern of trade in final goods between two countries : For other final-goods industries, key material inputs into production are best obtained through complicated, longer-term contracts to assure steady availability of the inputs. What do you predict about the pattern of trade in final goods between t..
What would you suggest the university do to expand revenue : Under what conditions will revenue (a) rise, (b) fall, or (c) remain the same? Explain this process, focusing on the relationship between the increased revenue from students enrolling at NSU despite the higher tuition and the lost revenue from pos..
Create a journal article critique for the given article : Create a Journal Article Critique for the article. The directions and questions to think about while creating the critique. Please make sure the journal article critique is 2-3 pages in length (not including the title, or reference page).
Probability that a professor selected at random works : The amount of time university professors devote to their jobs per week is normally distributed with a mean of 52 hours and a standard deviation of 6 hours. 1. What is the probability that a professor selected at random works for more than 52 hours ..
Estimate the bearing angle of the acoustic source : ECE 148 Signal Processing Applications Assignment - Estimation of Range and Bearing Angle. A passive detection system consists of two acoustic receivers. The separation between the receivers is 2.5 meters. Estimate the bearing angle of the acoustic s..
North american free trade agreement : According to the Stolper- Samuelson theorem, how is this shift affecting the real wage of unskilled labor in Mexico?
How a query is optimized : Using the graphical interface, you can look at each enumerated plan at several levels of detail, toggle (i.e., turn on/off) the availability of indexes, join methods, and so on.
Conductor choose new members : A town orchestra is holding auditions for 3 new flute players and 4 new trumpet players. If 8 flutists try out, and 11 trumpeters try out, how many ways can the conductor choose his new members?
Electronic components : You are planning to purchase a toy robot for your nephew's birthday. The robot has 5 electronic components. There is a 1% probability that any one of the components will be defective. If two or more of the components are defective, the robot wi..

Reviews

Write a Review

Other Engineering Questions & Answers

  Find minimized sop logic expression having inputs a-b-c

A city council has three members, A, B, and C. Each member votes on a proposition (1 for yes, 0 for no). Find a minimized SOP logic expression having inputs A,B, and C and output X that is high when the majority vote is yes and low otherwise. Show..

  Fabrication engineering at the micro and nanoscale

Air pressure decreases as altitude increases. At 18,000 ft above mean sea level, the atmospheric pressure is about half of what it is at sea level (i.e.,760 torr). The temperature also decreases by about 70 C. Does this change the speed distributi..

  How much will the coffee that you poured the water into cool

In a refrigerator, heat is transferred from a colder area (the inside of the refrigerator) to a warmer area (the air outside of the refrigerator). Given what you know about internal energy, explain how this is possible.

  Problems based on digital signal conditioning

An 8 bit DAC has a reference voltage of 5V. What would be the voltage corresponding to a binary word of 10010011?

  Obtain a primitive flow table for the circuit

Assume that the length of the train is less than two miles - Obtain a primitive flow table for the circuit and show that the flow table can be reduced to four rows.

  What wavelength of light be emitted from led made from gaas

The first LEDs were made from GaAs, which has a band gap of 1.43 eV. What wavelength of light would be emitted from an LED made from GaAs? What region of the electromagnetic spectrum does this light correspond to: UV, visible, or IR?

  Determine the maximum output current

A logic gate drives a load, which has a resistance of 1 kΩ and a capacitance of 20 pF. The printed circuit track connecting the gate to its load has an 40 pF capacitance to ground. The output changes state from 2.5 V to 0 V in 200 ps. Determine th..

  Review energy use and develop an energy plan

Your organization is about to review its energy use and develop an energy plan, including as many renewable power sources as possible. You have been asked to prepare a presentation for upper management about fossil fuel, nuclear energy, and altern..

  Obama administration levies punitive tariffs on inporting

Obama Administration levies punitive tariffs on inporting tires and solar panel from China in the name of saving American jobs. Does tariff save jobs? Please specify your points of view. Student 1

  Radio frequency identification

Topic is on RFID (Radio Frequency Identification) RFID Privacy and Security

  Athens medical claims reengineering

Athens Administrators is an open indemnity claims administration services organization. Athens identified a growing trend of future medical claims within their client's population, descriptive statement and one (1) sample of a prescriptive statemen..

  A voltage-divider based common emitter

Verify the bipolar junction transistor (BJT) voltage divider biased DC parameters through schematic theoretical analysis, simulated circuit analysis and constructed circuit analysis

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd