Estimate particle size that will be collected with 50percent

Assignment Help Civil Engineering
Reference no: EM13313871

A cyclone has been designed with an inlet width of 10cm and an inlet height of 6cm. The height of the main upper cylinder is 16cm and the height of the lower cone is 16cm. The inlet gas velocity is 16m/s and the particle density is 1.6 gm/cc. The working temperature of the process is 400K. Estimate the particle size that will be collected with 50 percent collection efficiency.

Reference no: EM13313871

Questions Cloud

Determine the surface area of a 1m depth lagoon : A well mixed sewage lagoon is to be constructed to process 100,000 gallons per day of raw sewage. The pollutant concentration in the raw sewage to be discharged into the lagoon is 200ppm.
Description case methods : DescriptionCase methods are used to enable you to apply concepts,
Determine the mass of the cat : A cat walks along a plank (length = 4.00 m and mass = 7.00 kg).  What is the mass of the cat
Define how many gas molecules are present : 3- A 498mL sample of laughing gas, N2O, is at 30 *C and 414 torr pressure (a) How many gas molecules are present. (b) How many atoms are there
Estimate particle size that will be collected with 50percent : The inlet gas velocity is 16m/s and the particle density is 1.6 gm/cc. The working temperature of the process is 400K. Estimate the particle size that will be collected with 50 percent collection efficiency.
What is the denstiy of the fluid : A cubical box .2 m on a side is completely immersed in a fluid. The pressure at the top of the box is 105 kPA, What is the denstiy of the fluid
Explain moles of sodium hypochlorite needed to prepare : Given that the Ka for hypochlorous acid is 3.0x10^-8 determine the number of moles of sodium hypochlorite needed to prepare this solution.
Determine what would be the carbon emission rate : Suppose in 100 years energy consumption is still 330 Ej/yr, but coal supplies only 20 percent of total demand, natural gas supplies 30 percent, and oil 10 percent. The remaining 40 percent of demand is met by noncarbon-emitting sources.
Analyse the different tools available to a judge : Analyse the different tools available to a judge to interpret the law. To what extent the tools are used effectively by judges?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the volume of stone required for each filter

a two stage high rate trickling plant is to treat a municipal wastewater having a flow of 2.0mgd. pertinent data: influent BOD5 = 200mg/l, BOD5 removal by primary clarifier = 33%, filter bed depth = 5 to 7ft

  Compute the seepage velocity

Compute the seepage velocity and estimate the hydraulic gradient in the aquifer if the porosity of the soil is 42%.

  Calculate factor of safety if the material does not yield

The program should use both the maximum shearing-strength criterion and the maximum-distortion-energy criterion. It should also print the values of the principal stresses and, if the material does not yield, calculate the factor of safety.

  Determine what is the present value of the truck

CPM Construction plans to buy a truck for $150,000 and sell it for $15,000 at the end of 5 years. The annual operating cost of the vehicle is $60,000. What is the present value of the truck

  What is the percent yield

Carbon disulfide (CS2) reacts with excess chlorine (Cl2) to produce carbon tetrachloride (CCl4) and disulfur dichloride (S2Cl2). If 69.7 g of CS2 yields 62.6 g of CCl4, what is the percent yield? (Hint, you must first write the balanced equation.)

  Find the moment equations and then the deflection

a simple beam with a pin support at A on the left side of my beam, and a roller connection 20 feet away on the far right side of the beam labeled C, with the midspan point (10 feet) labeled B.

  Explain how the difference in piezometric pressure

A manometer is used to measure the pressure difference between points A and B in a pipe. Water flows in the pipe, and the specific gravity of the manometer fluid is 2.8. The distances and manometer deflection are indicated.

  Determine the molar fraction of the gas that condenses

The stream from a gas well is a mixture containing 50 mol % methane, 10 mol % ethane, 20 mol % propane, and 20 mol % n-butane. This stream is fed into a partial conderser maintained at a pressure of 250 psia

  Determine void ratio-porosity and moisture content of soil

A container containing saturated soils weighs 113.27 g before being placed in an oven and 100.06 g after drying remains in the same container overnight. The empty container weighs 49.31 g and relative density of the grains is 2.80.

  Ratio of the magnitude in uniform electric field

What is the ratio of the magnitude of E2 to the magnitude of E1? You may neglect the effects of gravity on the proton.

  Explain how and why the rotational restraint at top of wall

The design of a masonry wall to support vertical compression loading is influenced by the same factors that affect the design of all compression elements. One of these factors is the extent of rotational restraint at the top of the wall.

  How much will paycheck be worth when withdraw it in 40 years

If you place $600 from your first paycheck into a Roth IRA earning 4.00 percent annual interest, how much will it be worth when you withdraw it in 40 years

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd