Estimate concentration of tba after 10 minutes of oxidation

Assignment Help Civil Engineering
Reference no: EM13322917

A groundwater is contaminated with methyl tertiary butyl ether (MTBE) at a concentration of 20 mg/L.the groundwater will be treated with an advanced oxidation process that involves formation of hdyroxyl free radical (OH*). MTBE reacts to form TBA as a reaction intermediate compound.TBA continues to react to produce other tertiary butyl alcohol (TBA) in an in series reaction ,as shown below:
MTBE + OH* -> TBA (1)
TBA + OH* -> other products (2)
first reaction is first order with respect to MTBE and the 2. reac. is 1. order respect to TBA.both reactions are 1.order with respect to OH*.k1=1.6*10^9L/mole-sec,k2=6*10^8L/mole-sec.note that free radical concentrations remains constant as a function of time in these oxidation systems.MTBE is oxidized by 99% within 5 minutes in a batch reactor.

a)estimate the concentration of TBA after 10 minutes of oxidation in this batch reactor.

b)assuming the ground initally contains 15mg/L of TBAtogether with 20 mg/L of MTBE.estimate the concentration of TBA after 10 minutes of oxidation in this batch reactor?

Reference no: EM13322917

Questions Cloud

Determine the maximum bending stress in the beam : A cantilever beam 3.5 m long supports a load of 20kN on its free end. find the maximum bending stress in the beam.
What is the volume of the box as we observe it : In its own reference frame, a box has the shape of a cube 2.5mon a side. This box is loaded onto the flat floor of a spaceship, What is the volume of the box as we observe it
Determine the exit temperature if the gas is argon : A diffuser receives an ideal gas flow at 100 kPa, 300 K with a velocity of 250 m/s and the exit velocity is 25 m/s. Determine the exit temperature if the gas is argon, helium or nitrogen.
Explain what is the normal boiling temperature : The following reaction is known to have a standard change in enthalpy of 148 kJ/mol and a standard change in entropy of 312 J/(mol•K) at 25ºC. What is the normal boiling temperature (ºC) of XY3? XY3(l) ? XY3(g)
Estimate concentration of tba after 10 minutes of oxidation : A groundwater is contaminated with methyl tertiary butyl ether (MTBE) at a concentration of 20 mg/L.the groundwater will be treated with an advanced oxidation process that involves formation of hdyroxyl free radical (OH*).
How many units the want to buy : The program should ask the user three things:Which unit (A,B,C or D) he or she is responsable for buying, how many units the want to buy,and total budget for month.
What is the angle of the third order peak : In an X ray scattering measurement the first order diffraction peak is observed at angle 1= 17.4 deg. What is the angle of the third order peak
What amount was realized from the sale to actually use : A $2 million school-bond issue bearing interest at 15 percent payable annually and maturing in 25 year was sold at a price which a 20 percent annual rate of return to the investors. The brokerage fee for handling the sale was 0.3 percent of th..
Determine horizontal distance ab and elevation of point a : The height of the instrument during this measurement was 1.60m From the same setup from point A, the zenith angle and slope distance toward point B are measured as 83deg 32'30" and 186.23m respectively, while the elevation of point B is 315.34m AM..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the magnitude of the moment produced

The pipe assembly is secured on the wall by the two brackets. If the flower pot has a weight of 50lb, determine the magnitude of the moment produced about the x, y and z axes.

  Determine the net power produced by the cycle

An open system Brayton cycle has a heat input of 500 kW. The pressure ratio of is 15 and the mass flow rate of air through the engine is 1 kg/s. Right before compression the temperature of the air is 273K and the pressure is 70 kPa.

  What is the average power that the system will use

Assume that Santa weighs 300 lbs, visits 10 houses an hour and requires a 20 foot lift at each house, what is the average power that the system will use if it is perfectly efficient

  What pressure difference would expected for discharge meter

A discharge meter to be used in a 40 cm pipeline carrying oil (kinematic viscosity = 10-5 m2/s, density = 860 kg/m3) is to be calibrated by means of a model (1/4 scale) carrying water (T = 20°C and standard atmospheric pressure).

  Determine what is the resultant thermal energy

The specific heat (C sub p) of aluminum is 0.214 calories per gram degrees Celsius (0.214 cal/g-C). If a cube of aluminum with a mass of 13.6 kg exhibits a change in temperature of +30 degrees Celsuis, what is the resultant thermal energy

  Determine the axial forces in the members of the truss

A cable is attached at A and is connected to the wall. Determine the axial forces in the members of the truss using the Method of Joints and indicate whether they are in tension (T) or compression (C). Be sure to provide complete free body diagram..

  Electron and hole motions in a p-n junction

Briefly describe electron and hole motions in a p-n junction for forward and reverse biases; then explain how these lead to rectification.

  Determine acceleration of initially stationary 20-kg body

Determine the acceleration of the initially stationary 20-kg body when the 50-N force P is applied. The small wheels at B are ideal, and the feet at A are small.

  How fast will ball c be traveling after all collisions cease

Three particles are sliding along a flat, frictionless surface. mA = 0.4 kg, mB = 0.5 kg, and mC = 0.4 kg. Before any collisions take place, vA = 15i m/s, vB = 10im/s, and vC = 5 m/s. e = 0.85 between A and B and e = 0.6 between B and C.

  Determine the force in chains ac and ad during the lift

the 3.5mg engine is suspended from a 500 kg spreader beam and hoisted by a crane which gives it an acceleration of 4m/s^2 when it has a velocity of 2m/s. determine the force in chains AC and AD during the lift.

  Describe which one will be harder to remediate and why

if a source of groundwater gets contaminated with a DNAPL and another one gets contaminated with a LNAPL, which one will be harder to remediate and why

  Find probability that none of sampled items are defective

A sample of six items is drawn from this lot. Find: a) the probability that none of the sampled items are defective b) the probability that one or more of the sampled items is defective c) the probability that exactly one of the sampled items is d..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd