Draw a ds1 frame and label it in detail

Assignment Help Other Engineering
Reference no: EM13329145

digital transmission

1. Draw a DS1 frame and label it in detail.

2. ISDN

a. What is the data rate for a single BRI channel (which does not use bit robbing)?

b. Some home ISDN "modems" will combine two BRI channels together. What would the data rate be if you could use both channels simultaneously for data transmission?

c. What is the data rate of a single channel on a T1 connection that does not use bit robbing?

d. What is the overhead of a DS1 frame that uses bit robbing?

3. An E1 is the European version of our T1. An E1 frame has 32 channels. The first channel is channel 0. All 8 bits of channel 0 are used for framing. Channels 1 to 15 are used for data or voice and no bit robbing is used or needed. Channel 16 is used for control information on all the voice and data channels. Channels 17 to 31 are also for voice or data.

a. How many channels are overhead?

b. How many channels can be used to send data?

c. What is the overhead and the through put for an E1 frame?

d. Using the magic number, what is the total data rate used to send E1 frames?

e. What is the data rate for the users information?

f. How many framing bits are sent in one second?

Reference no: EM13329145

Questions Cloud

Discuss the market segmentation within that industry : Write a white paper on a company of your choice and discuss the market segmentation within that industry along with the target market for the company and the selection process for that target market.
How fast will the object be going : Vector F= 3xi + 5j + 5z^2k. How much work is done in moving from r0=(0,0,0) to r1=(3,2,1)? how fast will the object be going
Develop a focus group discussion guide to conduct the focus : You are hired as an independent (qualitative) consultant to hold focus groups in thirteen campuses to come up with the suggestions of what kind of activities to be selected and suggest some programs.
How to calculate the wavelength of a muon : Calculate the wavelength (in nanometers) of a muon weighing 1.884x10^25g traveling at 325m/s.
Draw a ds1 frame and label it in detail : What is the data rate of a single channel on a T1 connection that does not use bit robbing?
What is the speed and acceleration of the pebble : Your roommate is working on his bicycle and has the bike upside down. He spins the 70.0cm -diameter wheel, What is the speed and acceleration of the pebble
How much does lloyd need to increase his withholding : This year Lloyd, a single taxpayer, estimates that his tax liability will be $10,000. Last year, his total tax liability was $15,000. He estimates that his tax withholding from his employer will be $7,800.
Despite name the silica gel is a solid : The small bags of silica gel you often see in a new shoe box are placed there to control humidity. Despite its name, silica gel is a solid. It is a chemically inert, highly porous, amorphous form of SiO2
Compute the speed of the three coupled cars after collision : A railroad car of mass 2.3 104 kg moving at 3.50 m/s collides and couples with two coupled railroad cars, compute the speed of the three coupled cars after the collision

Reviews

Write a Review

Other Engineering Questions & Answers

  Thin, thick and combined cylinder theory

Strength of Materials: Advanced DV01 35, LO2 Thin, Thick and Combined Cylinder Theory:  This outcome is assessed using all three of the assignments detailed below.   For each assignment you are required to write a report.

  Analyze a drier that reduces the moisture content

Analyze a drier that reduces the moisture content of bentonite from 11% (bone dry basis) to 4% bdb. Assume the plant processes 100 tons/day is a gas fired rotary kiln

  Determine the airflows in each branch

Determine the airflows in each branch and what are the flows and pressure drops in each of the branches? Remove the restrictions from the previous question.

  What is the population equivalent of the waste

What is the population equivalent of the waste and what degree of treatment (% BOD satisfied) does this represent, assuming the plant influent to have a BOD5 of 250 mg/L

  Draw on relevant theoretical and management concepts

Draw on relevant theoretical and management concepts covered through the course and describe the problem or issue and critically analyse the issue including considerations of relevant policy and ecological factors

  Determining the shape of shafts and the size of shafts

Determining the shape of shafts and the size of shafts - Detail the unit operations within a conventional drill and blast shaft sinking operation including the shaft bottom operations as well as those undertaken on the sinking stage.

  Determine the vehicles aerodynamic drag coefficient

Using the supplied 3D model of the commercial vehicle available on Moodle and solidworks flowsimulation conduct a CFD analysis to determine the vehicles aerodynamic drag coefficient.

  Growth chracteristics of the organism

To examine the relationship between fermenter design and operating conditions, oxygen transfer capability and microbial growth.

  Formulate a minimum cost flow problem

Represent the above problem as a network optimization problem. Particularly, you will need to formulate a minimum cost flow problem. Draw the network by defining the nodes, node values, and what they represent; and, the arcs, arc costs, arc capaci..

  Characterize the production performance of bakken wells

Characterize the production performance of Bakken Wells. You need to correlate the decline rates of Bakken wells to well/reservoir/completion Parameters, and finally make contour maps.

  Formulate dr. konurs maximum-flow problem as a linear model

Represent Dr. Konur's problem on a network by defining the nodes, node values (if any), arcs, arc costs (if any), arc capacities (if any) and state it as a maximum-flow problem and mathematically formulate Dr. Konur's maximum-flow problem as a lin..

  Describe and compare the ventilation systems

State reasons for the popularity of decline mining in modern operations. What factors need to be taken into account in deciding the cut off depth beyond which shaft operations should be used instead of decline access.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd