Dram and sketch the system. include coordinate system

Assignment Help Civil Engineering
Reference no: EM13556965

A plate is pulled upward from a pool of liquid with velocity, V, entering a thin liquid film on the surface of the plate. The flow is assumed to be laminar and the film thickness, H, constant. Using a coordinate system located on the plate at the surface of the pool, complete the following:

a. Dram and sketch the system. Include coordinate system in your sketch.

b. In what direction is flow and shear stress?

c. What assumptions can you make regarding this system?

d. What are your boundary conditions for this system?

Reference no: EM13556965

Questions Cloud

Determine the magnitude of the heat the athlete gives off : Heat engines take input energy in the form of heat, use some of that energy to do work, and exhaust the remainder. Determine the magnitude of the heat the athlete gives off
Determine the force p required to pull the shaft : A 25-mm diamenter shaft is pulled through a cylindrical bearing as shown. The lubricant that fills the 0.3-mm gap between the shaft and bearing is an oil having a kinematic velocity of 8.0x10^-4 m^2/s and a specific gravity
What is the effective spring constant of this system : Imagine you had two identical springs, each with spring constant k. what is the effective spring constant of this system
How does this compare with the exact value : Repeat LEM(Limit Equilibrium Method) analysis in clay (undrained) using a circular failure surface, with the center of the circle a distance h above the edge of the footing. What ratio of h/B gives the minimum value of Nc? How does this compare with ..
Dram and sketch the system. include coordinate system : A plate is pulled upward from a pool of liquid with velocity, V, entering a thin liquid film on the surface of the plate. The flow is assumed to be laminar and the film thickness
What will be the mean velocity in each port : Water enters the lock of a ship canal through 180 ports, each port having a 2 ft by 2 ft cross section. The lock is 900 ft long and 105 ft wide. The lock is designed so that the water surface in it will rise at a maximum rate of 6 ft/min.
Explain how will the resonant frequencey of circuit change : if the resistance in a series RLC circuit remains the same but the capacitance and inductance are doubled, how will the resonant frequencey of the circuit change
What would be the maximum eccentricity : A circular footing of diameter B is expected to carry a column load with some eccentricity. The moment of inertia of the footing about its diameter is piB^4/64. What would be the maximum eccentricity
Compute what percentage of this crown is made of gold : You, Archimedes, suspect that the king?s crown is not solid gold but is instead gold-plated lead. What percentage (by weight) of this crown is made of gold

Reviews

Write a Review

Civil Engineering Questions & Answers

  What was students associated perception per reaction time

the student strikes the sign at a speed of 25 mi/h. if the student was traveling at 55 mi/h when the sign was first spotted, what was the students associated perception/ reaction time

  Calculate the potential methane production in one year

Solid waste production in the United states was 4.3lbs/person-day. Calculate the potential methane production in one year for a land fill that serves a community of 50,000 people.

  Determine the water ph for a contact time of 90 minutes

In Chlorine disinfection (3-log reduction in Giardia- Cysts), determine the water pH for a contact time of 90 minutes using a chlorine concentration of 2 mg/L at 20 degrees C

  Determine the coefficient in the equation for the head-loss

a pump is used to send water from one reservoir to another elevated reservoir. The pipe diameter is 0.120 m. The head-loss through the valve and pipe is given by equation hL =Bv12 2g

  Determine the specific weight of the wood

A solid wooden cube (.5*.5*.5 m^3) is floating in water and 0.2 of the cube extends above the water surface. Determine the specific weight of the wood.

  Find how much should the company be willing to spend

If the systems will reduce insurance claims by $100,000 two years from now, how much should the company be willing to spend now, it is uses an interest rat of 12% per year

  Determine the allowable value of the tensile load p

A steel bar serving as a vertical hanger to support heavy machinery in a factory is attached to a support by the bolted connection. The main part of the hanger has a rectangular cross section with width b1 = 1.5 in. and thickness t = 0.5 in.

  Question 1figure 1 shows a large crawler crane in operation

question 1figure 1 shows a large crawler crane in operation in a construction sitefigure 1nbspnbsp crawler

  What is length of consecutive wet days that has a occurence

Assuming that the number of days until the next dry day is geometrically distributed, what is the length of consecutive wet days that has a probability of occurence of no more than 0.05

  Determine the normal stress in each portion of the rod

A polystyrene rod consisting of two cylindrical portions AB and BC is restrained at both ends and supports two 6 kip loads. Knowing that E = 0.45 * 10^6 psi,

  A highway reconstruction project is being undertaken to

a highway reconstruction project is being undertaken to reduce crash rates. the reconstruction involves a major

  What is the pressure in the bottle when the bottle

A two-liter bottle is one-third full of water and two-thirds full of air. The air in the bottle has a gage pressure of 340 kPa. the bottle is turned upside-down and the cap is released so that the water is rapidly forced out of the bottle

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd