Does the steel have adequate charpy v notch fracture tough

Assignment Help Civil Engineering
Reference no: EM13549286

A Charpy V Notch test was conducted for an ASTM A572 Grade 50 bridge steel. the average values of the test results at four different test temperatires were found to be 10ft.lb -(-50 F) 15 ft.lb- 0F 40 ft.lb- 40F 60 ft.lb-100 F the bridge will be located ina region where specifications require minimum of 25 ft.lb fracture toughness at 30 F for welded fracture-critical member, does the steel have adequate Charpy V Notch fracture toughness? show your supportin calculations

Reference no: EM13549286

Questions Cloud

Calculate the current value of the index : A composite price index for the cost of vegetarian foods called eggs, artichokes, and tofu (EAT) was 330 ten years ago and has averaged an annual increase of 12% since. Calculate the current value of the index.
Determine the speed of the block after it has compressed the : A 20 kg block slides along the rough surface for which the coefficient of kinetic friction is 0.2. The block strikes a nonlinear spring with a speed of v=4.5 m/s. The spring is termed
Determine the average shearing stress in the bolts : A composite beam is made by attaching the timber and steel portions shown with bolts of 14-mm diameter spaced logitudinally every 200 mm. The modulous of elasticity is 10 GPa for the wood and 180 GPa for the steel
Describe a realistic investment problem where none of the : Assuming we are still in a world with only discrete investment choice, i.e., option A, option B, etc., describe a realistic investment problem where none of the environments discussed apply without some reframing.
Does the steel have adequate charpy v notch fracture tough : A Charpy V Notch test was conducted for an ASTM A572 Grade 50 bridge steel. the average values of the test results at four different test temperatires were found to be 10ft.lb -(-50 F) 15 ft.lb- 0F 40 ft.lb- 40F 60 ft.lb-100 F
How long would it be before the company could sell the : A multinational engineering consulting firm that wants to provide resort accommodations to certain clients is considering the purchase of a three-bedroom lodge in upper Montana that will cost $250,000.
Which pipe size is more economical at an interest rate : A chemical engineer is considering two styles of pipes for moving distillate from a refinery to the tank farm. A small pipeline will cost less to purchase (including valves and other appurtenances)
Calculate the depth h of mud for which the 3m concrete : Calculate the depth h of mud for which the 3m concrete retaining wall is on the verge of tipping about its forward edge A. the density of mud may be taken to be 1760 kg/m3 and that of concrete to be 2400 kg/m3.
What rate of return did the company make on the process : Barron Chemical uses a thermoplastic polymer to enhance the appearance of certain RV panels. The initial cost of one process was $130,000 with annual costs of $49,000 and revenues of $78,000 in year 1, increasing by $1000 per year

Reviews

Write a Review

Civil Engineering Questions & Answers

  Slope deflection approach to find complete deflection

Use slope deflection approach to find complete deflection solutions for a fixed fixed beam with concentrated force, F, distance a from left end and axial load P.

  The column bearing is 12 in. measured along the beam

A W24X94 beam on a 6 ft span underpins a column that brings 110 kips dead load and 280 kips live load to its top flange at a location 2.5 ft from the left support.

  Determine what is the four lane freeways aadt

A four lane freeway (two lanes in each direction) operates at capacity during the peak hour. It has 11-ft lanes, 4-ft shoulders, and there are three ramps within three miles upstream of the segment midpoint and four ramps within three miles downst..

  Calculate the difference in elevation from a to b

In trigonometric leveling from point A to point B, the slope distance and the zenith angle measured in A were 2504.897 m and 85o08'54". At B, these measurements were 2504.891 m and 94o52'10" respectively.

  Determine rate of increase of speed and the normal force

sled and rider with a total weight of 200 lb travel down smooth slope defined by equation y=x^2/20. At x=40 ft the sled's speed is 10 ft/s. At x=40 ft determine rate of increase of speed and the normal force which the slope exers on the sled.

  Determine the normal depth in the channel for a discharge

A natural channel that is clean and irregular(n= 0.040) has a bottom width of 15 ft m, side slopes of 6:1 (H:V) and a bottom slope of 0.0002. Using Manning's equation, determine the normal depth in the channel for a discharge of 720 cfs.

  What do will result if the concentration of the waste

The discharge from the Renenutet sugar beet plant causes the DO at the critical point to fall to 4.0 mg/L. The Meskhenet Stream has a negligible BOD and the initial deficit after the river and wastewater have mixed is zero

  Determine the forces fx and fy necessary to hold the pipe

Water flows steadily through a horizontal 30 degree upward bend. The inlet diameter is 0.3 m, the velocity is 12 m/s, and the pressure is 128 kpa gage. The outlet diameter is 0.38 m and the pressure is 145 kpa gage.

  What is the steady-state concentration of radon in the house

The total volume of the house is 650 m3 (assume that the volume is well mixed throughout). The radon source emits 250 pCi/s (A picoCurie [pCi] is a unit proportional to the amount of radon gas and indicates the amount of radioactivity of the gas)

  Compute evaporation rates in the winter and in the summer

At a certain location during the winter, the average air temperature is 10 degrees celcius and the net radiation is 40W/m^2 and during the summer the net radiation is 200W/m^2 and the temperature is 25 degrees celcius.

  How many customers would be served pertruck if each home has

Making two runs per day, how many customers would be served pertruck if each home has once-per-week service and the truck is usedfive days per week?

  Find what depth of aggregate is needed at the angle theta

A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd