Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A Charpy V Notch test was conducted for an ASTM A572 Grade 50 bridge steel. the average values of the test results at four different test temperatires were found to be 10ft.lb -(-50 F) 15 ft.lb- 0F 40 ft.lb- 40F 60 ft.lb-100 F the bridge will be located ina region where specifications require minimum of 25 ft.lb fracture toughness at 30 F for welded fracture-critical member, does the steel have adequate Charpy V Notch fracture toughness?
An equal-tangent crest vertical curve has a 50 mi/h design speed. The initial grade is +3%. The high point is at station 33+37.43 and the PVT is at station 37+18.26. What is the elevation difference between the high point and the PVT
A pitot-static tube is used to measure the velocity at the center of the pipe. If the fluid velocity is 10 ft/s, what is the deflection on a mercury manometer connected to the pitot-static tube
The factory will use a 4 ft deep on-site lagoon to stabilize the waste with a loading rate of 20 lb BOD/acre-day. Part a) What is the total BOD loading per day?
Due to a street crossing a roadway, the elevation of the roadway at station 3 +413.760 must be at 129.388 m. Design the curve?
The u-tube manometer has legs of unequal internal diameter d1 and d2, which are partially filled with immiscible liquids of density1, and density2 respectively and which are open to the atmosphere at the top.
In the field, if the relative compaction is 90%, determine the hydraulic conductivity of the sand in the field compaction condition (given that k for the sand at the maximum dry density condition is .040 cm/sec and Gs = 2.65).
My question is regarding UVA levels in raw and treated drinking water with regard to TOC and DOC removal. Is there a jar test procedure that incorporates the UVA values of the various stages of treatment and is there a document you could refer me ..
Carbon disulfide (CS2) reacts with excess chlorine (Cl2) to produce carbon tetrachloride (CCl4) and disulfur dichloride (S2Cl2). If 69.7 g of CS2 yields 62.6 g of CCl4, what is the percent yield? (Hint, you must first write the balanced equation.)
Demand for a particular product is normally distributed with a mean of 100 units and a standard deviation of 20 per period. if there are 120 units in inventory at the beginning of this period
A rapid-mixing basin is to be designed for a water coagulation plant, and the design flow for the basin is 4.0 MGD (million gallons per day). The basin is to be square with a depth equal to 1.25 times the width.
The effective angle of friction (phi) was found to be 26 degrees for a normally consolidated soil. If the soil is tested in consolidated drained triaxial test under sigma3 = 60 kPa, what would be the failure deviatoric stress sigma1-sigma3 stress
A trapezoidal channel is to be designed to carry a discharge of 250 cfs at a normal depth of 3.5 ft. The channel is running on a slope of 0.005 ft/ft and the side slopes can be no steeper than 2.5 H on 1 V.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd