Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A flocculation/sedimentation combination basin in a conventional drinking water treatment plant is to be constructed of cast-in-place reinforced concrete. The horizontal flow rectangular basin will be located in New Jersey, USA. The client must decide whether or not to pay to have the basins covered with a concrete slab or,alternatively, left open. Discuss all the factors that the client should consider when deciding whether or not to cover the floc/sed basin. Discuss all the advantages, disadvantages and considerations that the client should think about. Be clear and complete so the client understands what the choices are and any ramifications of the decision.
The pressure on the back side is negative; its magnitude is 0.5 times the (negative) stagnation pressure on the back side. Determine the drag coefficient for the sign type
Calculate the minimum flow rate (m^3/hr) of river water needed to acheive pre cooling hot, pasteurized liquid prodcut assuming that 10% heat is lost to the surroundings during exchange and that the water temp after cooling should not exceed 25 deg..
beam is fixed at one end, spans 21' then goes over a roller support then 6' continues to hang over. there is a point load halfway betwen the supports (10.5') and another at the far end. there is also a distributed load that stretches the entire be..
A simple beam of Douglas-Fir Larch, select grade, has a span of 18 ft with two concentrated loads of 3 kips each placed at the third points of the span. Neglecting its own weight, determine the size of the beam with the least cross-section
The flow through an 8 ft. Parshall Flume is 129 cfs when Ha is 2.50 ft. Determine the downstream water level (Hb) that would produce this flowrate.
A line passes through the points (22 m, 19 m) and (-2 m,-5 m). determine the perpendicular distance d from the line to the origin O of the system of coordinates.
A 230,000-lb space shuttle orbiter touches down at about 220 miles per hour (mph). At 200 mph, its drag parachute is deploys. The wheel brakes are applied at 100 mph until wheel sotp and the drag parachute is jettisoned from the orbiter at 35 mph.
Compute the maximum acceptable tensile service load T that may act on a single angle L6x4x3/4 that is welded along only one leg to a gusset plate; thus, there are no holes. The service load is three times the dead load. Solve for a0 A36 steel.
the circular top of a can has a radius of .0320m. the pull-tab has an area of 3.8x10^-4 m^2. the absolute pressure of the carbon dioxide in the can is 1.40x10^5Pa. find the force that these gas generates on the top of a can?
If r = (theta)2 and theta = 2t, find the magnitude of r dot and theta double dot when t = 2 s
Laboratory analysis methodology to be used. Give details on the standard methods, instrument and detection limits. Standard methods for heavy metals analysis exist
If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd