Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1. What are the differences and similarities between soil and rock in terms of load application (tension and compression)?
2. Haw many shape can be use for rock samples preparation for compression test? and tension test?
3. What is the meaning of compression load in the real world?
4. What is the meaning of tension load in the real world?
5- Definition of tension and compression for materials.
6-Tension and compression of rock samples.
7-Tension and compression of soil samples.
Facultative stabilization ponds with a total surface area of 6.0 ha serve a community with a waste discharge of 530 m cubed/d at a BOD of 280 mg/l.
A river 5 m deep flows over a sand deposit. The saturated unit weight of the sand is 18 kN/m^3 and the unit weight of water is 9.8 kN/m^3. At a depth of 5 m below the river bed:
friction on the concrete surface creates a couple moment of 100 Mm on the blades of the trowel. Determines the magnitude of the resultant couple forces so that the resultant couple on the trowel is zero
Determine the pump power in W & hp required to pump water froma tank at the base of the world's tallest building (1667 ft) to ahot tub of similar size on the roof. Ignore friction losses& changes in atmospheric pressure due to change inelevation. Flo..
Draw the shear diagram for the shaft. The bearings at and exert only vertical reactions on the shaft
The salt water mixes thoroughly with the fresh water and the mixture overflows out of the tank. If the flow rate out of the tank is 60 liters/minute. Assume freshwater is 1000 kg/m^3, and the salty water is 1020 kg/m^3.
The plate is submerged in a liquid is a vertical position with the parallel sides horizontal and the shorter parallel side at the top and exactly in the surface of the liquid.
The Hubert H. Humphrey Metrodome in Minneapolis opened in 1982 at a cost of $55 million. To prepare for the footings, et cetera, 30.0x10^5 cubic yards of dirt were removed.
The plant will be designed with a rapid mix unit followed by flocculation and sedimentation basin. The water source has an average winter water temperature of 40 and an average summer water temperature of 70oF.
A single crystal of a FCC metal is oriented so that the [001] direction is parallel to an applied stress of 35.0 MPa. Calculate the resolved shear stress acting on the (111) slip plane in the [110], [0-11], [10-1] slip directions.
of 2640 psi with a factor of safety of 2.0 with respect to yielding. the yield stress of the steel is 65,000 psi in tension and 32,000 psi in shear. the diameter of the tank is 7.0 in. the minimum required wall thickness is 0.289 in.
A well mixed sewage lagoon is to be constructed to process 100000 gallons per day of raw sewage. The pollutant concentration in the raw seweage to be discharged into the lagoon is 200ppm. the organic matter in the sewage has been shown in a laborator..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd