Develop the model by finding the objective function

Assignment Help Civil Engineering
Reference no: EM13320732

In an Less-than-Truckload trucking company, terminal docks include casual workers who are hired temporarily to account for peak loads. At the Omaha, Nebraska, dock, the minimum demand for casual workers during the 7 days of the week (starting on Monday) is 20, 14, 10, 15, 18, 10, and 12 workers. Each worker is contracted to work 5 consecutive days.

Develop the model by finding the 1)variables 2)objective function 3) and constraints

Reference no: EM13320732

Questions Cloud

Find the linear density of the string : The middle C string on a piano is under a tension of 882 N. The period and wavelength of a wave on this string are 3.82 10-3 s, Find the linear density of the string
Find where is the image : A convex mirror has a focal length of %u221219 cm. Where is the image if the image is upright and one-half the size of the object
What are equivalent units of production for direct material : O'Malley Corp. uses a weighted average process costing system. Material is added at the beginning of the production process and overhead is applied on the basis of direct labor. O'Malley's records indicate that 70,000 units were in process at the beg..
Calculate the mass of the green house gas and ozone : Calculate the mass of the green house gas and ozone depleting substance CFC-11 (chemical Formula = CCl3F) in the atmosphere. Use units of GtC (giga tonnes carbon)
Develop the model by finding the objective function : At the Omaha, Nebraska, dock, the minimum demand for casual workers during the 7 days of the week (starting on Monday) is 20, 14, 10, 15, 18, 10, and 12 workers.
Implied interest rates in europe and the u.s. : What is the implied interest rate for the first six months and what is the implied forward rate six months hence - what are the implied interest rates in Europe and the U.S.?
Find the change in the length of the solenoid : A 6.30 x 10 -5 H solenoid is constructed by wrapping 54 turns of wire around a cylinder with a cross-sectional area of 6.4 x 10-4 m2. find the change in the length of the solenoid
Write brief paragraph summarizing habitat simulation method : Write a brief paragraph summarizing the following Habitat Simulation Method used to analyze environmental flow requirements.
Estimate the values of the spring constant : The suspension system of a 1800 kg automobile "sags" 14 cm when the chassis is placed on it. Estimate the values of the spring constant

Reviews

Write a Review

Civil Engineering Questions & Answers

  At what air temperature will exhaled breath condensed

At what air temperature will exhaled breath condense by self-nucleation. Assume that a saturation ratio of 4.3 is required.

  Find void ratio and wet unit weight for degree of saturation

A sand sample has a porosity of 38% and specific gravity of solids of 2.66. Find the void ratio and wet unit weight in lb / ft3 if the degree of saturation is 35%.

  What is the mass of the earth in pound-mass and kilograms

The Earth may be considered as a sphere whose diameter is 8000 mi. and whose density is roughly approximated to be 6560 kg/m^3. What is the mass of the Earth in pound-mass and kilograms

  Compute the work done by the gas for the processes

Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3.

  Find concentration of acetone in river due to pulse release

The water velocity is estimated to be 3.0 m/sec. Acetone has a density of 0.786 gm/mL and a half-life in water of 20.0 hr. Determine the concentration of acetone in the river due to this pulse release at distance of 2, 4, and 7 km from the site at..

  Estimate the hydraulic retention time if the reactor is pfr

A biological reactor is used to treat wastewater from a small community (Q = 100,000 gpd). The influent BOD5 concentration to the reactor is 200 mg/L and the required effluent BOD5 concentration is 30 mg/L.

  Predict the temperature required in an isothermal plug flow

Using the method of lee et al. predict the temperature required in an isothermal plug flow incinerator to reduce the xylene level in a waste gas from 1000 ppm to 10ppm. Assume a residence time of 0.7 sec.

  Determine the amount of oil and money saved per year

The maximum flow rate of a standard shower head is about 3.5 gpm and can be reduced to 2.75 gpm by switching to a low-flow shower head that is equipped with flow controllers. Consider a fam- ily of four, with each person taking a 6-minute shower e..

  Determine soils angle of internal friction under pressure

A triaxial test was performed on a dry, cohesionless soil under confining pressure of 144 kN/m^2. If the sample failed when the deviator stress reached 395.8 kN/m^2, determine the soil's angle of internal friction.

  Find time and distance downstream at critical point occurs

Just below the point where a continuous discharge of pollution mixes with the river, the BOD is 10.9 mg/L and the DO is 7.6 mg/L. The river and waste mixture has a temperature of 20oC, a deoxygentation constant of 0.2/day

  Determine the cycle time for a single engine scraper

Determine the cycle time for a single engine scraper rated at 21 cy heaped that is used to haul material from a pit to a fill 900 ft away under severe conditions. The average haul speed will be 14 mph and the average return speed will be 20 mph.

  Determine the height of the wake region h

You may assume that the total pressure at the downstream station is uniform across the tunnel and given by the value at the wall. Neglecting gravitational effects.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd