Determining the compressive strengths

Assignment Help Civil Engineering
Reference no: EM1383547

Determine the compressive strengths of the following:

A) A 6-in. diameter concrete cylinder that failed at ta test load of 135,000

B) A-3-in. diameter specimen that failed at a test load of 30,000

Reference no: EM1383547

Questions Cloud

What is the probability that rich will go to each store : Rich's 13 year old daughter Alexandra is going to give him an introductory trombone concert later in the day, and he wants to purchase earplugs before then
Discuss the role of snare in exocytosis : Determine which organ system are msot invovled with homeostasis and discuss the role of SNARE in exocytosis.
Program-dynamically check store-s inventory-central office : You are the outside consultant to large chain of grocery stores. Store's management would like to dynamically check store's inventory from central office.
What is it called and how does someone go about : There is a formal process. What is it called and how does someone go about getting a policy reviewed, updated; or changed.
Determining the compressive strengths : Determine the compressive strengths of the following: A) A 6-in. diameter concrete cylinder that failed at ta test load of 135,000 B) A-3-in. diameter specimen that failed at a test load of 30,000
The chinese contractor has approached you and suggested : The Chinese contractor has approached you and suggested that the new Chinese construction standards are unnecessarily high
Problem of coefficient of static friction : The machine part ABC is supported by a frictionless hinge at B and a wedge at C. Knowing that the coefficient of static friction is 0.20 at both surfaces of the wedge, determine:
Impact of technology on social institutions : We should critically examine the representative views of the social role of technology. In doing so we address two fundamental questions:
Calculate the conduction velocities for the ipsilateral : Use Figure 1 and 9C in the paper by Carr & Konishi, calculate  the conduction velocities for the ipsilateral and contralateral axons from the nucleus magnocellularis within nucleus laminaris.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the rate of flow-unconfined aquifer

In an unconfined aquifer having K = 30/m/day, two observation wells, 3km apart, have water levels of 50 and 40 m, respectively, above the base of the aquifer. Determine the rate of flow.

  Shafts in a speed-reducer unit

The two shafts in a speed-reducer unit are subjected to couples of magnitude M1 = 18 N · m and M2 = 7.5 N · m, respectively.

  Filter in each filter cycle

a) What flow rate (m 3/s) does the filter handle during production? b) What volume of water is needed for backwashing plus rising the filter in each filter cycle?

  Tighten the packing on a leaking argon valve

A worker needs to enter a confined space to tighten the packing on a leaking argon valve. Describe two procedures that could be used to isolate the argon line and valve prior to starting work.

  Problem related to specific gravity of solids

A soil specimen has a water content of 18% and a wet unit weight of 118.5 lb/cu. ft. The specific gravity of solids is found to be 2.72. Find the:

  Pressure on the soil if theta is given

A pipe is to be installed under the ground on a bed of aggregate 6 in. thick. The entire weight on the aggregate from pipe and soil above the pipe is 1800 lbs. per linear foot of pipe. What is the pressure on the soil if theta is 45 degrees? Assum..

  Determine the value of po

Determine the value of Po, as a funciton of H, for these two investment alternatives to be equivalent at an interest rate of i=15% per year.

  Cause of pavement damage

On a flexible pavement with a 3 inch hot mix asphalt (HMA) wearing surface, a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(Suppose drainage coefficients are 1.0).

  Water system design

Determine the corresponding error in the computed discharge

  Tackling the problem of making tunnel

You are a Project Manager on site where work for 3K.m. long Tunnel has been undertaken. The site is remote and takes about 2 days travel to nearest town. Supervisors, Technicians & Skilled Workers are engaged in dangerous / hazardous work.

  Structure project design in civil engineering

Land is extremely valuable in this area therefore to win this job you need to consider innovative approach to reduce the waste areas

  Position of the race car when acceleration is given

Starting from x = 0 with no initial velocity, the acceleration of a race car is defined by the relation a = 6.8e- 0.00057x , where a and x are expressed in m/s 2 and meters, respectively. Determine the position of the race car when v = 30 m/s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd