Determine what would be the relative compaction in the field

Assignment Help Civil Engineering
Reference no: EM13313556

The maximum and minimum dry unit weights of a sand were determined in the laboratory to be 104 lb/ft^3 and 93 lb/ft^3, respectively. what would be the relative compaction in the field if the relative density is 78% ?

Reference no: EM13313556

Questions Cloud

Find the maximum principal effective stress at failure : Given the initial effective stress state at a point within a soil mass (s_y=2.5 daN/cm2, s_x=1.5 daN/cm2, t_xy=t_xy=0.4 daN/cm2) and effective soil shear strength parameters at the same point
Explain the reaction flask instead of 1-hexene : Explain the effect of the following experimental errors on your results: a) You add hexane to the reaction flask instead of 1-hexene b) You use 3% hydrogen peroxide instead of 30% c) You forget to add potassium carbonate in the seperation step.
Calculate volume of sample that will be used in bod bottle : If a sample for BOD needs to be diluted by a factor of 0.02 , calculate the volume of sample that will be used in the BOD bottle
What are the eigenvalues of g : #2: Let G be the graph with vertex set Z_2^n( the same as the n-cube) and with edge set defined as follows: {u, v} is an edge of G if u and v differ in exactly two coordinates (i.e., if ω( u, v) = 2). What are the eigenvalues of G?
Determine what would be the relative compaction in the field : The maximum and minimum dry unit weights of a sand were determined in the laboratory to be 104 lb/ft^3 and 93 lb/ft^3, respectively. what would be the relative compaction in the field if the relative density is 78%
Determine the effective spring constant : a typical sedan ( like corolla Toyota) has unloaded mass of 1.2x10^3 kg. Determine the effective spring constant "k" for the suspension system for critical damping
Explain what is the molar flow rate of the gas in mol/h : A gas mixture containing 80.0 mol% N2 and the remainder n-heptane flows through a pipe at a rate of 10.0 m3/h. The pressure is 0.90 atm and the temperature is 100°C. a. What is the molar flow rate of the gas in mol/h
What is the electric-field energy stored in the capacitor : A spherical capacitor is formed from two concentric spherical conducting shells separated by vacuum. What is the electric-field energy stored in the capacitor
Determine the dimensions of the pit that minimizes cost : Assume excavation costs at $100/m3, side lining costs at $50/m2, and cover cost at 25/m2. Determine the dimensions of the pit that minimize cost -If the side slope is unconstrained and -If the side slope must me less than 450

Reviews

Write a Review

Civil Engineering Questions & Answers

  At which the driver could apply the brakes and still stop

The road is in good, dry conditions until 160 ft before the stalled car where it is wet and stays wet for the remaining length. What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitt..

  What are the masses of gravel-sand and water per cubic meter

The design of a concrete mix requires 1173kg/m3 of gravel in SSD condition, 582 kg/m3 of sand in SSD condition, and 157kg/m3 of free water. The gravel available at the job site has a moisture content of 0.8% and absorption of 1.5%

  Determine what is present worth of maintaining the bridge

Maintenance expenses for a bridge in west Tennessee are estimated to be $200,000 for the first eight years followed by two separate million dollar expenditures in years 12 and 18. The expected life of the bridge is thirty years.

  Determine when would the wells start interfering each other

One of the wells pumps at a rate of 1,240 m^3/ day. The second well pumps at 850 m^3 / day. If the aquifer has a T= 2000m^2 / day and a storage coefficient of 0.0004, when would the wells start interfering each other

  Determine the speed before the plunger strikes the stop

If the arm is pulled back such that s= 100 mm and released, determine the speed of the 0.41-kg pinball B just before the plunger strikes the stop, i.e., s= 0. Assume all surfaces of contact to be smooth.

  Bisection method to find the root of equation

Use the bisection method to find the root of the equation f(x) = x 2 - 4sin(x) = 0. For initial bracketing interval [a,b] , take a=1 and b = 3.

  Calculate its elongation when a load of 100n is applied

consider a cylindrical copper wire 3.0mm in diameter and 3x10^4 mm long. calculate its elongation when a load of 100N is applied. Assume that the deformation is totally elastic and its Young Modulus is 110GPa.

  Define need before function

Which of the following is not a basic systems engineering concept?a. Define need before function

  Determine what is the free flow speed on specific westbound

On a specific westbound section opf highway, studies show that the speed density relationship is u=uf *[1-(k/kj)^3.5]. It is known that the capacity is 4200hehicle/hr and the jam density is 210 veh/mile.

  How to calculate the increase in weight of the tank

water flows into a weigh tank for 30 minutes. Calculate the increase in weight of the tank, if the discharge is 1.5 ft^3/s. The temperature is 50 F.

  Define what must the drivers eye height in the van be

A civil engineering student contends that 60 mph is safe in a van because of the higher driver's eye height. If all other design inputs are standard, what must the driver's eye height in the van be for the student's claim to be valid

  Determine the heights of the fluid columns for barometers

Determine the heights of the fluid columns for barometers that use the following liquids at 20 C: water, ethyl alcohol, and mercury. Why do you think mercury barometers were used in the past (before the negative health effects of mercury were know..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd