Determine what should be the diameter of each basin

Assignment Help Civil Engineering
Reference no: EM13298814

A 4 mgd water treatment planet is being designed for an overflow rate of 0.5 gpm/ft^2. If two circular sedimentation basins will be used at al times, what should be the diameter of each basin?

Reference no: EM13298814

Questions Cloud

Concerning an international business law issue : locate a current event concerning an international business law issue. Unfortunately, in this day and age there seem to be many from which to choose. The event should be no more than 60 days old.
Explain the volume become if the temperature dropped : A balloon was filled to a volume 2.50 L when the temperature was 30.0 degrees C. What would the volume become if the temperature dropped to 11.0 degrees C
What is the ratio of these two gravitational pulls : What is the ratio of these two gravitational pulls? (An approximate answer is fine, since, for example, the distance to your friend is likely to change frequently.)
What is the impedence of the air conditioner : An air conditioner connected to a 139 V rms ac line is equivalent to a 11 capital omega resistance and a 2 capital omega inductive reactance in series. What is the impedence of the air conditioner
Determine what should be the diameter of each basin : A 4 mgd water treatment planet is being designed for an overflow rate of 0.5 gpm/ft^2. If two circular sedimentation basins will be used at al times, what should be the diameter of each basin
Find the magnitude of the angle subtended by red blood cell : A typical red blood cell subtends an angle of only 1.8×10^-5 rad when viewed at a person's near-point distance of 25 cm. find the magnitude of the angle subtended by the red blood cell
Find the z centroid for the cone the scoop of ice cream : A single-scoop ice cream cone is a composite body made from a single scoop of ice cream placed into a cone.  Assume that the scoop of ice cream is a sphere with radius r=1.45in that is placed into a 4.00in tall cone.
Privilege-hearsay and witness competency : Privilege. Lay Witnesses. Hearsay-Explain the concept of hearsay and the underlying rationale for the hearsay rule. Witness Competency-Discuss the four factors that are used to evaluate the competency of a witness.
Explain for a fixed quantity of gas at constant pressure : According to Charles Law, for a fixed quantity of gas at constant pressure, which of the given quantities is constant? V/T, VXT, or V+T

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine diameter of glass tubing for the capillary rise

Determine the diameter of glass tubing that is necessary for the capillary rise to be less than 0.5 mm. Assume the fluid is water with surface tension equal to 0.0728 N/m and specific weight equal to 9800 N/m3

  Determine what is the effluent bod concentration

An activated sludge tank, 30 x 30 x 200 ft, is designed as a plug-flow reactor, with an influent BOD of 200 mg/L and a flow rate of 1 million gallons per day. a. If BOD removal is first-order reaction, and the rate constant is 2.5 days^-1, what is ..

  Determine the minimum green time for each approach

A traffic signal control is being designed for a four-leg intersection on a divided highway with the characteristics shown in the table below. Determine an appropriate length of the yellow interval for each approach and how you will provide it.

  Estimate the power required to accelerate a 1350 kg vehicle

The vehicle has a frontal cross -sectional area of 1.9 m^2. The roadway has a straight alignment and a badly patched and broken asphalt surface. assume a drag coefficient of 0.3 and p of air of 1.29 kg/m^3

  Calculate earth gravitational force

Calculate Earth's gravitational force on the Shuttle astronauts while orbiting at an altitude of 220 miles (or 354 km) above Earth's surface.

  What is value of p that make work of the two processes

If this two-step process is replaced by a single isothermal expansion of the air from 800 K and 4 bar to some final pressure P, what is the value of P that make the work of the two processes the same

  Compose a list here of the geological terms

Was the dam itself of sound design and a product of quality construction?

  Determine the specifc energy of water in the channel

A rectangular channel is 25ft wide and has a flow of 500 cfs at a velocity of 5ft/s. (a) Determine the specifc energy of water in the channel. (b) What is the criticl depth of water in the channel (c) What is the critical velocity

  Tensile modulus of elasticity

Calculate the tensile modulus of elasticity for a 10 laminated composite consisting of 62 percent by volume of unidirectional carbon fibers and an epoxy matrix under isostress conditions.

  Design an earthen channel section into sandy soil

An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.

  Determine the dead load in pounds per linear foot for beams

The beams support one-way slabs, 6 inches thick that span 20 feet center to center. Assume that the beams are 16 inches wide and 24 inches deep. Determine the dead load in pounds per linear foot for the beams, from the concrete structure alone.

  Evaluation of engineering projects

Why is the ‘time value of money' important for the evaluation of engineering projects? Provide at least one practical example to support your view (max 2 pages).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd