Determine what pressure will be required

Assignment Help Civil Engineering
Reference no: EM131032801

In the 1800s, before the development of modern air-conditioning, it was proposed to cool air for buildings with the following procedure using a large piston-cylinder device ["John Gorrie: Pioneer of Cooling and Ice Making," ASHRAE Journal 33, no. 1 (Jan. 1991)]:

1. Pull in a charge of outdoor air.

2. Compress it to a high pressure.

3. Cool the charge of air using outdoor air.

4. Expand it back to atmospheric pressure.

5. Discharge the charge of air into the space to be cooled.

Suppose the goal is to cool a room 6 m × 10 m × 2.5 m. Outdoor air is at 30°C, and it has been determined that 10 air changes per hour supplied to the room at 10°C could provide adequate cooling. Do a preliminary design of the system and do calculations to see if it would be feasible. (You may make optimistic assumptions for the analysis.)

(a) Sketch the system showing how you will drive it and how step 3 will be accomplished.

(b) Determine what pressure will be required (step 2).

(c) Estimate (guess) how long step 3 will take and what size will be needed for the piston-cylinder to provide the required air changes and temperature.

(d) Determine the work required in step 2 for one cycle and per hour.

(e) Discuss any problems you see with the concept of your design. (Include discussion of any changes that may be required to offset optimistic assumptions.)

Reference no: EM131032801

Questions Cloud

Perform the round-robin dispatch algorithm : Perform the Round-Robin dispatch algorithm, with time quantum equal to 300 milliseconds, on the job queue and calculate Average turn-around-time.
The return on equity for similar stocks : A stock has just paid a dividend and will pay a dividend of $3.00 in a year. The dividend will stay constant for the rest of time. The return on equity for similar stocks is 14%. What is P0?
The default risk premium for crockett''s bonds : Crockett Corporation's 5-year bonds yield 6.35%, and 5-year T-bonds yield 4.75%. The real risk-free rate is r* = 3.60%, the default risk premium for Crockett's bonds is DRP = 1.00% versus zero for T-bonds, the liquidity premium on Crockett's bonds is..
Plan to analyze the value of a potential investment : a. The cash flows are in the form of a deferred annuity, and they total to $100,000. You learn that the annuity lasts for only 5 rather than 10 years, hence that each payment is for $20,000 rather than for $10,000.
Determine what pressure will be required : Estimate (guess) how long step 3 will take and what size will be needed for the piston-cylinder to provide the required air changes and temperature.
What strategies would you recommend for a person : How do you think that leadership would be different for a person who leads only persons between 18 and 35 and a person whose followers are mainly over the age of 40? What strategies would you recommend for a person who becomes the leader of a mixe..
Write a research paper about apple history : Write a research paper about apple history.
Write a words essay question-chinese religion : Write a 600 words essay question-Chinese religion. We could say that Confucianism, Daoism, and Buddhism, all see fundamental problems with the state of the world.
Analysis of risks involved in the project : Analysis of risks involved in the project and proposed risk mitigation strategies - analysis of stakeholder groups, stakeholder issues and stakeholder management strategies

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find reynolds number for the motion of baseball through air

(a) Find the Reynolds number for the motion of this baseball through air. (b) Determine the drag force on the baseball under these conditions in N.

  Determine the r-134a exit temperature in the enthalpy

At compressor exit, the specific entropy is the same as that at the inlet, and the pressure is 60 psia. Determine the R-134a exit temperature and the change in the enthalpy of R134a.

  How long must the droplet fall to achieve a concentration

The saturation concentration for the drop is 9.20 mg/L. If, after falling for two seconds, the droplet has an oxygen concentration of 3.20 mg/L, how long must the droplet fall (from the start of the fall) to achieve a concentration of 8.20 mg/L

  Determine the maximum in-plane shear stress on the wall

a). Determine the state of stresses in the walls and indicate these stresses (including arrows to denote the direction of the stresses) on the element below. b). Then, determine the maximum in-plane shear stress on the wall of the pipe using Mohr's..

  Determine the uniform flow depth in a rectangular channel

Determine the uniform flow depth in a rectangular channel 2.5 m wide with a discharge of 3 m3/s. The slope is 0.0004 and Manning's roughness coefficient is 0.015

  Explain plan for construction of a small child care center

describe how would you develop a subcontracting plan for the construction of a small child care center

  Find pipe diameter if it is to be full with steady rainfall

Rainwater runoff from a 200 x 500 ft parking lot is to drain through a circular concrete pipe that is laid on a slope of 5 ft/mi. Determine the pipe diameter if it is to be full with a steady rainfall of 1.5 in/hr

  The initial and after-consolidation void ratio of the sample

A saturated sample of soil, 38mm in diameter and 75mm high, hasbeen prepared for a triaxial test. Total mass of the sample was measured as 144.6grams, and the initial moisture content determined at 25.2%. The Specific Gravity of thesolids was estimat..

  What speed in mph is required

A steam locomotives had scoops installed that took water from a tank located between the tracks and lifted water into the tender. To lift the water 12 ft with a scoop, neglecting all losses, what speed in mph is required?

  Explain break even stripping ratio

Break Even Stripping Ratio (BESR), Given an underground total mining cost of $8.85 per tonne, surface mining costs of $2.95 per tonne of ore, and surface mining stripping costs of $1.75 per tonne of waste

  Estimate the compression and recompression indices

Based on experience, the geotechnical engineer estimated the coefficient of consolidation at 8 m2 per year. To limit settlement, a 4-m-high embankment will be constructed as a surcharge from fill of unit weight 16 kN/m3. Estimate the compression a..

  What is the maximum grade the cat 785d truck

According to the CAT Manual, the CAT 785D truck is a front-drive truck that has an empty weight of 256,849 lbs, heaped volume of 102 CY, and a target payload of 157 tons. The weight is shown below. The CAT 785D’s maneuver (in loading and dumping area..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd