Determine what must be the allowable elongation

Assignment Help Civil Engineering
Reference no: EM13315592

A cylindrical rod of brass alloy (E = 100 GPa,) having a yield strength of 345 MPa is to be subjected to a load of 7500 N. If the length and diameter of the rod are 338 mm and 7.55 mm respectively, what must be the allowable elongation?

Reference no: EM13315592

Questions Cloud

Judicial review is concerned with decision making process : Judicial Review is concerned with the decision making process because it examines or focuses on how the decision was made, and therefore determines the legality of how the decision was reached or concluded. However, judicial review does review whethe..
Describe what happens to the direction of the vector : if you switch the sign of all the components of a vector (this called"parity reversal "),what happens to the length of the vector. what happens to the direction of the vector
Use a loop in main to efficiently handle all three persons : Plan and finish writing the main program, and all the functions, including a constructor. Use a loop in main to efficiently handle all three persons' data.
Compute poissons ratio for material at modulus of elasticity : A cylindrical specimen of some alloy 50.26 mm2 in cross sectional area is stressed elastically in tension. A force of 1620 N produces a reduction in specimen diameter of 5 X 10-3 mm. Compute Poisson's ratio for this material if its modulus of elas..
Determine what must be the allowable elongation : A cylindrical rod of brass alloy (E = 100 GPa,) having a yield strength of 345 MPa is to be subjected to a load of 7500 N. If the length and diameter of the rod are 338 mm and 7.55 mm respectively, what must be the allowable elongation
What the concentration in the effluent be 7 days later : A lagoon with volume 1,200 m3 has been receiving a steady flow of a conservative waste at a rate of 100 m3/day for a long enough time to assume that steady-state conditions apply. The waste entering the lagoon has a concentration of 10 mg/L.
Determine the percentage increase in the discharge the ditch : As part of a drainage improvement project, a drainage ditch will be straightened and cleaned. As a result, the lenght of the ditch will decrease from 1800 ft to 1400 ft and the mannings roughness factor will be reduced to 0.018 from 0.022.
How many kilograms of sodium carbonate : Sodium carbonate (Na2CO3rm Na_2CO_3) is used to neutralize the sulfuric acid spill. How many kilograms of sodium carbonate must be added to neutralize 3.02×103kgkg of sulfuric acid solution
Ntt docomo company for communication : 1-NTT Docomo Company for Communication and company

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is one important facet of the system

With all the developments and improvements to the GNSS system over the years, what is one important facet of the system that has not improved

  Determine what is the total elongation of the pipe

a prismatic bar AB of length L, cross section A, modulus of elasticity E, and weight W hangs vertical under its own weight. if the bar is a riser pipe hanging from a drill rig at sea, what is the total elongation of the pipe

  Compute the volume of a waste sludge with water content

Compute the volume of a waste sludge with 96% water content containing 1000 lb of dry solids. If the moisture content is reduced to 92%, what is the sludge volume

  How many balloons would it take

To float a 160 pound man using helium balloons (assume 0.52 cubic feet per inflated balloon). How many balloons would it take? Assume density of air is 1.29 kg/cubic meter and the density of helium is 0.179 kg/cubic meter.

  Find the load p and stress in the aluminum for the stress

The column is composed of two materials, the inner is brass with a diameter of 100mm and the outer is aluminum with a diameter of 150mm. A rigid flat plate is placed on top to insure that both materials move together when compressed.

  Draw elevation, plan and development of the lateral surfaces

Axis of the hole is perpendicular to VP. Draw elevation, plan and development of the lateral surfaces of the pyramid.

  Determine the design flow for the conduit

An intake conduit from a well field used to pump ground water is being designed for a town with a population of 23,000 people. Six years ago the population was 21,500 people. a) assuming deometric growth, calculate the population in 50 years

  Determine the tension in cable be and the reactions a and d

A light bar AD is suspended from cableS and supports a 20 kg block at C. The extremities A and D of the bar are in contact with frictionless, vertical walls. Determine the tension in cable BE and the reactions A and D

  Determine what is the maximum steady speed in mph

A vehicle of mass 2000 kg coasts along a horizontal track against a drag force Fd (in N) on the automobile given by the following Fd=kV^2 where k= 1.25 kg/m and V is the speed in m/s.

  Estimate amount of lime required for specified ferric dose

estimate the mass and volume of sludge produced from unreated wastewater without and with the use of ferric chloride for the enhanced removal of TSS. Also, estimate the amount of lime required for the specified ferric schloride dose.

  How high can the hump be made without backing flow up

A smooth hump is placed in the bottom of the channel. What would be the depth of flow over a 3 ft high jump. How high can the hump be made without backing flow up What would be the depth of flow over and just upstream of a 6 ft high jump

  Calculate the space-mean speed in mile per hour

If there are 50 vehicles on a 4000-ft highway lane and the average time headway between two adjacent vehicles is 2.2 seconds. A) Calculate traffic density in vehicle/mile (vpm) and average space headway in feet/vehicle (fpv).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd