Determine what is the turbidity downstream from charlotte

Assignment Help Civil Engineering
Reference no: EM13320686

The James River flows in from the East at 50 m^3/s and joins the Jackson River flowing at 500 ft^3/min just outside Charlotte, NC. The turbidity in the James River is 6.8 NTU. If the turbidity in the Jackson River is 2.4 NTU, then what is the turbidity downstream from Charlotte, NC after the Jackson River joins the James River? Assume steady state conditions, no reactions occuring, and no other sources or sinks for turbidity.

Reference no: EM13320686

Questions Cloud

Determine what is the effluent concentration at the rate : A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration
Example of a health care market : Choose an example of a health care market and identify ways in which it differs from perfectly competitive model. Do you think that these deviations from competition could each be repaid by appropriate policies? Discuss
Determine what is the effluent concentration at the rate : A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration
Determine the translational speed : A spherical pinball, initially at rest, rolls down a ramp inclined at 18 degrees relative to horizontal. Determine the translational speed
Determine what is the turbidity downstream from charlotte : The James River flows in from the East at 50 m^3/s and joins the Jackson River flowing at 500 ft^3/min just outside Charlotte, NC. The turbidity in the James River is 6.8 NTU.
Separate concerns of metaphysics-epistemology : What are the separate concerns of metaphysics, epistemology, and ethics? Give an example of how a religion makes claims that fall under these areas.
Explain the process of lost wax casting : Explain the process of lost wax casting.
What is the concentration of bod in the jackson river : The James Rives flows in from the East at 320 m^3/min and joins the Jackson River flowing at 605 m^3/min just outside the town of Charlotte, NC. The concentration of BOD in the James River is 14 mg/L.
Income increase or decrease : The company believes that a reduction in sales price of 10%, combined with an increase in advertising of $8000 will cause an increase in sales volume of 20%. If the company undertakes this advertising campaign by how much will income increase or decr..

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the break-even number of units per year

A semiautomated system has been developed as an alternative. The costs for the proposed method are $40,000 for equipment and $1.00 per manufacturing cost per unit. What is the break-even number of units per year

  Development of the lateral surfaces of the pyramid

Axis of the hole is perpendicular to VP. Draw elevation, plan and development of the lateral surfaces of the pyramid.

  Compute evaporation rates in the winter and in the summer

At a certain location during the winter, the average air temperature is 10 degrees celcius and the net radiation is 40W/m^2 and during the summer the net radiation is 200W/m^2 and the temperature is 25 degrees celcius.

  Determine by trigonometry the required tensoin t2

determine by trigonometry (a) the required tensoin T2 in the left hand portion if the R of the force exerted by the cable at A is to be vertical, (b) the corresponding magnitude of R.

  Determine flow rate into or out of each reservoir in pipe

Three reservoirs are connected by three pipes with hA = 100 f t, hB = 20 f t, hC = 0 f t, L1 = 1000 f t, L2 = 500 f t, L3 = 400 f t and D1 = D2 = D3 = 1 f t. Determine flow rate into or out of each reservoir if friction in each pipe is 0.02.

  Determine the source and sink temperature

Carnot engine working between a source temperature of T2 and sink temperature of T1 has efficiency of 25%. if the sink temperature is reduced by 20 degrees Celsius the efficiency is increased to 30%. find the source and sink temperature

  Evaluate damage of material and compressive strength

A structural element subjected to cyclic loading is made of fc' = 3000 psi concrete. Compressive stresses are changing between 2200 psi and 1600 psi. The frequency of loading is 8 Hz.

  Detremine the cfat in year 0 for the challenger and defender

The defender had a first cost of $300,000, but its market value now is only $100,000. It has chargeable expenses of $120,000 per year and no expected salvage value. To simplify calculations, assume that SL depreciation was charged at $60,000 per y..

  How many double-tracked sections are needed to allow trains

A light rail transit agency operates trains over a 25-km long single-track line. During the peak period, it operates five trains at 15-min headway. Train travels at an average speed of 50 km/hr.

  Design settling tank to remove all metal and sand particles

The sand particles range in diameter from 0.04 to 2.0 mm with a specific gravity of 2.65. The wastewater discharge rate is 1400 m3 /d at 20°C. Design a settling tank to remove all the metal and sand particles.

  Find tensile stress that will give probability of failure

The median value of the rupture strength was 300 MPa. The ceramic is to be used for components with dimensions l=50mm, b=d=5mm loaded in simple tension along their length. Calculate the tensile stress that will give a probability of failure of the..

  Determine the required source temperature of heat sink

A Carnot heat engine is supplied with a high temperature heat source at a rate of 200 kW. If the power output of the heat engine is 120 kW, determine the required source temperature if the heat sink temperature is 20 °C.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd