Determine what is the tensile stress in the rope

Assignment Help Civil Engineering
Reference no: EM13320639

A person (mass of 80g) is lifted upward by a 2 cm diameter safety rope with constant velocity. What is the tensile stress in the rope?

Reference no: EM13320639

Questions Cloud

Find the power loss in the inductor : An inductor of 493 mh with a resistance o44 ohms is connected to a power supply with a maximum voltage of 264V and a frequency of 53 Hz. Find the power loss in the inductor
How much does the water in the cloud weigh in pounds : Clouds can weigh thousands of pounds due to their liquid water content. Often this content is measured g/m^3. Assume that a cumulus cloud occupies a volume of one cubic km, and its liquid water content is 0.2g/m^3.
How long is the telescope : A 60-power refracting telescope has an eyepiece with a focal length of 5.5cm. How long is the telescope
What focal length is needed for her objective lens : A grade school student plans to build a 31-power telescope as a science fair project. She starts with a magnifying glass with a focal length of 4.8cm as the eyepiece
Determine what is the tensile stress in the rope : A person (mass of 80g) is lifted upward by a 2 cm diameter safety rope with constant velocity. What is the tensile stress in the rope
Find the power of the second machine : A machine is designed to perform a given amount of work in a given amount of time. Find the power of the second machine
What is the maximum grade the vehicle could ascend : A 2500-lb car (CD = 0.35, Af = 25 ft^2, and ? = 0.002378 slugs/ft^3) has 14-inch-radius wheels, a drivetrain efficiency of 90%, an overall gear reduction ratio of 3.2 to 1, and drive axle slippage of 3.5%.
What is the maximum coefficient of road adhesion : The owner wish to achieve an initial acceleration from rest of 15 ft/s^2 on a level paved surface. What is the maximum coefficient of road adhesion needed to achieve this acceleration
How will the shareholder be taxed : Cardinal Corporation (a calendar year taxpayer) had a deficit in accumulated E & P of $500,000 at the beginning of the current year. Its net profit for the period January 1 through July 30 was $600,000, but its E & P for the entire taxable year wa..

Reviews

Write a Review

Civil Engineering Questions & Answers

  How to design the slab for minimum overall thickness

A one-way solid concrete slab is to be used for a simple span of 16 ft. In addition to its own weight, the slab carries a superimposed dead load of 50 psf and a live load of 75 psf.

  Power plant efficiency problem

A 600 MWe power plant has an efficiency of 36% with 15% of the waste heat being released to the atmosphere as stack heat and the other 85% taken away in the cooling water.

  What is necessary volume of lagoon to meet requirments

Wastewater enters and anerobic pond at a BOD of 246 mg/L and a flowrate of 0.1 m^3/s. The waste degrades at a rate of 0.40d. Effluent from the lagoon must have a BOD of 23.9mg/L.

  Determine the height from the ground at which ball pass

Ball A is thrown vertically upward from the top of a 20-{\rm m}-high-building with an initial velocity of 3m/s . At the same instant another ball B is thrown upward from the ground with an initial velocity of 16m/s .

  Determine what is runoff coefficient in a basin located

What is the runoff coefficient in a basin located near the middle of the climatic spectrum, with annual precipitation P = 32 in, ecosystem evapotranspiration ET = 22 in, and baseflow U = 3 in

  How far apart must two 18 m diameter tanks be placed

How far apart must two 18 m diameter tanks be placed such that their stress overlap is not greater than 10% of the contact stress at depths of 10, 20, and 30 m

  Determine the speed of the stone

A 0.20 kg stone attached to a 0.8 m long string is rotated in a horizontal plane. The string makes an angle of 25° with the horizontal. Determine the speed of the stone.

  Describe at least four basic features of cpm software

Describe the problem of lack of coordination between design and construction in a traditional contract. In agency CM,what expertise does the CM provide during the pre-design and design phase.

  Determine the safety factor of the wire against breaking

The length of the wire is 7,000 m, the weight density of the steel is 78 kN/m3 and its ultimate stress is 620 MPa. Find the safety factor of the wire against breaking from its own weight.

  Calculate the angles made by f with the positive x

A force is specified by the vector F= 120i-160j+80k lb. Calculate the angles made by F with the positive x-,y-, and z- axes.

  Find drag force fd on golf ball assuming to smooth sphere

Determine the drag force FD on a golf ball assuming it is a smooth sphere. (Assume the air is at 60 F and standard pressure.) Now determine the drag force on an actual golf ball assuming CD = 0.25. How do the two forces compare

  Determine the x and y scalar components

The forces F1, F2, and F3, all of which act on point A of the bracket, arespecified in three different ways. Determine the x and y scalar components of each of the three forces.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd