Determine what is the pore water pressure at that level

Assignment Help Civil Engineering
Reference no: EM13313220

A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface?

Assume the water is static and assume a datum at the water surface.

A) what is the total head 5.0m below the river bed?

B) What is the pore water pressure at that level?

Reference no: EM13313220

Questions Cloud

Period expense, direct cost or indirect cost : Period expense, direct cost or indirect cost.
What is the undrained shear strength of the clat in kpa : A saturated clay deposit is vane-tested in-situ. A torque of 30Nm is required to shear the clat. The vane is 40mm wide by 100mm long. What is the undrained shear strength of the clat in kPa
Find its resulting charge : A soot particle, originally neutral, gets charged in a process that removes 27 electrons. Find its resulting charge
Define a class called counter : Define a class called Counter. An object of this class is used to count things so it records a count that is a non-negative whole number. Include methods to set the counter to 0, to increase the counter by 1, and to decrease the counter by 1.
Determine what is the pore water pressure at that level : A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface. Assume the water is static and assume a datum at the water surface.
Explain sodium bromide plus sodium sulfide : What is the name of the compound when you say Sodium Bromide plus Sodium Sulfide. Also, please write the formulas for each.
At what angle upstream should the driver head the boat : The driver of a motorboat that can move at 10 m/s wishes to travel directly across a narrow strait in which the current flows at 5 m/s. At what angle upstream should the driver head the boat
Plot the process on a p-v diagram and a p-t diagram : A frictionless piston-cylinder contains 2kg of nitrogen at 100 kPa absolute and 300 deg K. The system is compressed polyprotically at a 1.4 exponent (n) until the nitrogen reaches a final temperature of 360 deg K.
Estimate of the impact of the program : State A implented a program to reduce smoking rates in 2005. State B did not. Using the data provided in the attached graph, calculate the difference-in-difference estimate of the impact of the program.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is angular error if the distance to the pole

A 6-ft range pole is set over a station on which a sight is to be made with a the odolite. If the sight is made to the center of the rod 4-ft up from the ground, and the center of the top of the pole is out of plumb 0.12 feet in a direction normal..

  Estimate the wet density

A sample of natural glacial till was taken from below the groundwater table. The water content was found to be 52%. Estimate the wet density,dry density,buoyant density,porosity,and void ratio. Clearly state any necessary assumptions.

  Determine the acceleration of the car

Motor M draws in the cable with an acceleration of 4 , measured relative to the 220 mine car. Determine the acceleration of the car. Neglect the mass of the pulleys.

  What percentage increase will be in the flow from house

suppose a family of four, living in a home with an area of 100x5oft connects its stormwater drain to the sewer. Assume that 1in of rain falls over 1 day. what percentage increase will there be in the flow from their house over the dry weather flo..

  Estimate force r on reducer when water flows through reducer

For any flowrate, the pressures in the pipes upstream and downstream of the reducer are expected to be related by using Bernoulli's equation where p1 and p2 are the upstream and downstream pressures and V1 and V2 are the upstream and downstream ve..

  Calculate the stopping sight distance over the crest

Calculate the stopping sight distance over the crest of a 1,500 ft vertical curve with a plus grade of 4.4percent and a minus grade of 2.3 percent.

  Determine the amount of oil and money saved per year

The maximum flow rate of a standard shower head is about 3.5 gpm and can be reduced to 2.75 gpm by switching to a low-flow shower head that is equipped with flow controllers. Consider a fam- ily of four, with each person taking a 6-minute shower e..

  Is the noise level of area 1 greater than 60 decibels

Office workers complain that the noise level in their office Area 1 is greater than that in the company's other office Area 2. Six measurements are made on different days in each area, with the following results

  Thermo-gravimetry of calcium oxalate

Evaluate the percent mass loss for each of the three thermal events indicated on the attached TGA trace

  Find the work done in pumping the water

a horizontal cylindrical tank 4 ft in diameter and 10 ft long is full of water. find the work done in pumping the water to a point 4 above the top of the tank.

  What would be the fraction converted in a half-hour run

A 10-min experimental run shows that 75% of a reactant is converted to a product by a zero-order reaction rate. What would be the fraction converted in a half-hour run. Assume the reactor is a batch reactor.

  How long does it take to reach near-steady conditions

Theis Method plot drawdown vs. time for 4 observation wells, 5, 50, 100, 500 meters from well pumping at constant rate of 300 m^3/day in sandy confined aquifer. b=12 m, K=25 m/day, and S=10^-4.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd