Determine what is the permeability of the soil

Assignment Help Civil Engineering
Reference no: EM13302552

The Permeability of a semi-impervious soil was evaluated in a falling-head permeameter whose head decreased from 40 to 15 inches in 5min. The body diameter was 0.1 inch, and the sample length and diameter was 2 inches. What is the permeability of the soil.

Reference no: EM13302552

Questions Cloud

What is the temperature of the liquid : The length of the mercury column at the ice point and steam point are 5.0 cm and 40.0cm respectively. What is the temperature of the liquid
Determine the weight of the water and the pressure forces : A 30-ft-high, 1-ft-diameter pipe is welded to the top of a cubic container 13 ft * 3 ft * 3 ft2. The container and pipe are filled with water at 20°C. Determine the weight of the water and the pressure forces on the bottom and sides of the contain..
Determine the annual effective interest rate : Marilyn invests $3,500 at time 0 in order to receive payments of $450 at times 1 year, 2 years, 3 years, and so on, with the last payment at time 10 years. Determine the annual effective interest rate that Marilyn earns.
How many ads of each type should be placed : How many ads of each type should be placed?
Determine what is the permeability of the soil : The Permeability of a semi-impervious soil was evaluated in a falling-head permeameter whose head decreased from 40 to 15 inches in 5min. The body diameter was 0.1 inch, and the sample length and diameter was 2 inches.
What will be the company return on equity : Management projects an EBIT of 1,000,000 on sales of 10,000,000 and it expects to have a total assets turnover ratio of 2.0, under these conditions, the tax rate will be 34%. If the changes are made, what will be the company's return on equity?
Determine the value of the dynamic viscosity at conditions : Start from the values for the density and the kinematic viscosity of CO2 at 15o C and standard atmospheric pressure (101.3 kPa), and first determine the value of the dynamic viscosity at the same conditions.
Determine effective annual interest rate for a nominal rate : Determine the effective annual interest rate for a nominal rate of 8% per year, in which is compounded quarterly.
What is its linear speed at the bottom of the incline : A spherical object with a moment of inertia of 0.482mr2 starts from rest rolling down a 3.14-m high incline. what is its linear speed at the bottom of the incline

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine the strain components strainx and strainy

Determine the strain components strainx, Strainy, and gammaxy, then sketch the deformed shape in the xy orientation, paying particular attention to the sign of the shear deformation.

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Find the density of air and weight of the air in the tank

An empty air tank has a volume of 0.024 m3. The compressor on the tank is run until the pressure gauge reads about 65 psi (or 22,500 Pa). Assuming the temperature of the tank is 25 C, find the density of the air and the weight of the air in the ta..

  Graph the data from the table on log-log paper using radius

Based on volume of a sphere V=4/3(pi)r^3, create a table of volume vs. radius allowing radius to vary from 2.0 to 10.0 cm in 1 cm increments. Graph the data from the table on log-log paper using radius as the independent variable.

  Standard test method for flash and fire points

What is the procedure standard test method for flash and fire points by cleveland open cup tester if there is animation or video is better....

  Radioactive waste from a clinical laboratory

A radioactive waste from a clinical laboratory contains 0.2 μCi (microcuries) of calcium-45 (45Ca) per liter. The half-life of 45Ca is 152 days.

  Determine the maximum distortion energy theory of failure

At a certain location on the surface of an engineering component, the material is in a state of plane stress with principal stresses of fmax = 150 MPa and fmin = 50 MPa (both tensile). If the yield strength of the material is Y = 350 MPa

  Determine what are the volume and density of the rock

A piece of rock weighs 301 N in air and has an apparent weight of 202 N when suspended under water. What are the volume and density of the rock

  What and where will be the maximum fluid pressure

A 10cm diameter vertical tank holds 20cm of water topped with 15cm of ethyl alcohol. The cylinder is rotated about its central axis at a rotation rate of 20 rad/s. (a) What will be the shape of the air-alcohol and alcohol-water interfaces

  What is the definition of a customer

What is the definition of a customer? What are some examples of internal and external customers? Is the measurement of customer satisfaction different for internal customers than for external customers?

  Find what design speed was used for freeway exit ramp

A freeway exit ramp has a single 12-foot lane and consists entirely of a curve with a central angle of 90 degrees and L=628 feet. If the distance cleared of obstacles is 19.4 feet from the centerline, what design speed was used

  Determine the magnitude and direction of the resultant

Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd