Determine what is the minimum standard size that is needed

Assignment Help Civil Engineering
Reference no: EM13304807

a mountain water reservoir in a national park is to provide water at a flow rate of Q= 200 gpm and a minimum pressure of 40 psig in the lodge of the valley 200 ft below the reservoir. If the effective length of pipe is 2000 ft, what is the minimum standard size that is needed? Neglect exit kinetic-energy effects.

Reference no: EM13304807

Questions Cloud

Find the distance in km that each car travel in that time : In an instant given two cars are moving in opposite directions and they are separate a distance of 300km. Determine the distance in Km that each car travel in that time
Compare the impact on pre-recorded music compact disks : Suppose the income elasticity of demand for pre-recorded music compact disks is +6.0 and the income elasticity of demand for a cabinet maker's work is + 0.6.
How far was the face standing from the mirror : A face appears in a convex mirror; face is 75% its normal size and appears to be 24cm behind the mirror. How far was the face standing from the mirror
What are your monthly car payments : You are considering buying a new car. the sticker price is $15,000 and you have $2,000 to put toward a down payment. If you can negotiate a nominal annual interest rate of 10% and you wish to pay for the car over a 5 year period, what are your mon..
Determine what is the minimum standard size that is needed : a mountain water reservoir in a national park is to provide water at a flow rate of Q= 200 gpm and a minimum pressure of 40 psig in the lodge of the valley 200 ft below the reservoir.
What is elevation of b by neglecting curvature and reaction : The line of sight of a level falls at a rate if 0.122ft/ 100 ft when the level bubble is centered. A backsight of 4.782 is taken on point A, which is at 75 ft from the level. the elevation of a is 425.238 ft.
Minimize the accessibility of classes and members : Why is this correct/when is this the right idea and Minimize the accessibility of classes and members
What sales volume would be required in order to meet : The investors will put up the funds if the project is likely to have an operating income of $500,000 or more. What sales volume would be required in order to meet the minimum profit goal? (Hint: Use the breakeven formula, but include the required ..
Calculate the effective cost of both proposals : Calculate the effective cost of both proposals, and indicate which proposal should be accepted.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how much sand did driver place in the drum

A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L.

  Determine the velocity of the solid sphere

A solid steel sphere with a specific gravity of 7.85 and diameter of 0.02 m is falling at its terminal velocity through water at 25 °C. Using either trial-and-error or a graphical approach, determine the velocity of the sphere

  Determine time required to dry grain at relative humidity

A batch dryer with a grain depth of 20 inches contain 21,000 pounds of 20.7% (wb) moisturecontent shelled corn. An airflow of 75,000 pounds dry air per hour is supplied at a temperature of 175°F. The ambient air is 55°F at 100% relative humidity.

  Find the increase in vertical stresses due to the weight

The center to center spacing to the two tanks is 14 m. The new tank imparts 150 kPa at the ground surface. Find the increase in vertical stresses due to the weight of the two tanks mid- way between the two tanks at the center of the clay layer.

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Determine the components of the reactions at a and g

Two 9-in.-diameter pipes (pipe 1 and pipe 2) are supported every 7.5 ft by a small frame like that shown. Knowing that the combined weight of each pipe and its content is 30 lb/ft and assuming frictionless surfaces

  Factors of safety against sliding and against overturning

Determine the factors of safety against sliding and against overturning, and also the soil pressure at the heel and toe. Assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m l..

  How much horizontal distance is there from prism to point a

using a prism and prism pole in conjunction with a total station, the bottom of the prism pole is placed on point A. the distance from the bottom of the prism pole to the center of the prism (HR) is 4.97 feet.

  Declare a variable, twindow

Double the width of the window, using widen, set the height of the window so that it is the same as the width, and set the title to the new value "Square Window".

  What is the distiniction b/n point and non point sources

what is the distiniction b/n point and non point sources of water pollution and thier varation with surface and ground water?

  Determine what was the distance between the markers

A 100 ft cut steel tape was used to measure between two property markers. The rear surveyor held 93 ft, while the head surveyor cut .67ft. What was the distance between the markers

  Compute difference in the weights of dry gravel in a 10 ton

A stockpile of gravel that has a water content of 6% is rained on so that its water content increases to 9%. Compute the difference in the weights of dry gravel in a 10 ton truckload taken from the pile before and after the rain.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd