Determine what is the minimum pipe diameter in the tube

Assignment Help Civil Engineering
Reference no: EM13314363

Helium(15 degrees celsius, 1atm) will be transported in a straight horizontal copper tube over a distance of 150 m at a rate of 0.1 m^3/s. If the pressure drop in the tube should exceed 6 in h20, what is the minimum pipe diameter?

Reference no: EM13314363

Questions Cloud

Write a module case study regarding the nextgen air : Write a module case study regarding the NextGen Air Transportation System:
What is the work done on the box : A rope is used to pull a block a horizontal distance of 50 metres. If the rope tension is 120 N, What is the work done on the box
Describe two important defensive steps or mechanisms : Identify any of the "measures that may be used for intrusion detection" (things/events that IDS look for) AND discuss how monitoring this measure might lead to a "false alarm" by your IDS.
Enthalpy of formation data to compute the number of moles : Use enthalpy of formation data to calculate the number of moles of CO2(g) produced per megajoule of heat released from the combustion of each fuel under standard conditions
Determine what is the minimum pipe diameter in the tube : Helium(15 degrees celsius, 1atm) will be transported in a straight horizontal copper tube over a distance of 150 m at a rate of 0.1 m^3/s. If the pressure drop in the tube should exceed 6 in h20, what is the minimum pipe diameter
Analyse and evaluate the major unique human factors : Analyze and evaluate the major unique human factors
Explain the relative molar amounts of the species : Identify the relative molar amounts of the species in 0.10 M NaBr(aq). If equal, place the species in the same box. H2O OH- H30+ Br- Na+ NaBr
Find what is the ratio of the flow rates in the two pipes : Two pipes of identical length and material are connected in parallel. The diameter of one is twice the diameter of the other. What is the ratio of the flow rates (Q2/Q1) in the two pipes
What magnitude of force is exerted on the wire : An electromagnet produces a magnetic field of 0.540T in a cylindrical region of radius 2.70cm between its poles. What magnitude of force is exerted on the wire

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Find the effective rate of return per quarter to purchaser

A $10,000 bond that matures in 20 years with interest at 8% per year payable quarterly was issued 4 years ago. If the bond is purchased now for $10,000 and held to maturity, what will be the effective rate of return per quarter to the purchaser

  Magnitudes of the additional loads

Determine the magnitudes of the additional loads that must be applied at B and F if the resultant of all six loads is to pass through the center of the mat.

  What is the present worth of the road at an interest rate

The cost of extending a certain road is $850,000. Resurfacing and other maintenance are expected to cost $175,000 every 3 years and lasts for 96 years. What is the present worth of the road at an interest rate of 6% per year (over that period)

  Find how many ml of water will it take to get 10 pounds

How many mL of water will it take to get 10 pounds of dry aggregate to a moisture content of 5%. 1 kg=2.2 pounds

  Determine tension in rope ab required for static equilibrium

The frame is designed to carry the hanging mass at G equal to 167 kg. The frame is supported by a pin connection at C and the rope AB, and constructed with pin connections at points E, F, and D. Importantly, members BEFG and EDC are continuous mem..

  Determine how many bits wide is the main memory data bus

A MIPS-based computer system with 2 GB of main memory that is built on a single circuit board. It is designed with a single control signal between the CPU chip and main memory, i.e. one bit of control that is set to one for Read operations

  Determine the average shear stress on the bolt surfaces

The top and bottom pull to the left with 10 kips each, the middle part 20 kips to the right. The bolts have a diameter 3/8 inch, determine the average shear stress on the bolt surfaces that are subjected to direct shear.

  Determine the length of the swale required with side slopes

The longitudinal slope of the swale is to be 1.5% with side slopes of 5:1 (H:V). If the grassed swale has a Manning's n of 0.030 and a minimum infiltration rate of 200 mm/hr, determine the length of the swale required.

  What total allowable bod kg per day could be discharged

A 5000 m3/day wastewater treatment plant discharges to a river with a minimum drought flow of 140 m3/min (upstream of outfall) a)What total allowable BOD (kg/day) could be discharged by the plant if the BOD in the river after initial dilution must ..

  Where the maximum ground level concentration would occur

a power plant burns 150,000 tonnes (1 tonne = 1,000 kg) of coal each year. The coal has 2.5% sulfur content, and the air pollution control equipment removals approximately 94% of sulfur. Assume 10% of the sulfur content ends up in the ash.

  Determine the vertical force exerted by the balloon

A ballon is tethered at a height of 16.8 m above the ground by three cables. if the tension in highlighted cable is 60 N , determine the vertical force exerted by the balloon at the base of the balloon basket.

  Determine smallest velocity vo for which package will reach

A small package of weight W is projected into a vertical return loop at A with a velocity Vo. The package travels without friction along a circle of radius "r" and is deposited on a horizontal surface at C.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd