Determine what is the infiltration rate from the rain

Assignment Help Civil Engineering
Reference no: EM13307570

A subsurface detention basin is installed beneath a street to help prevent flooding. Water from the rain is chanelled into the basin and begins to infiltrate into the ground when it reaches 1ft. The water table sits 29ft beneath the bottom of the basin and the soil in that distance consists of urban fill. The hydrauic conductivity of the soil is 139ft/day and the dimensions of the tank is 78ft by 13ft. What is the infiltration rate? How long will it take to empty the tank?

Reference no: EM13307570

Questions Cloud

Write an xeyes command to display a window : Find and install xeyes (not tuxeyes). Write an xeyes command to display a window that is 600 pixels wide and 400 pixels tall, is located 200 pixels from the right edge of the screen and 300 pixels from the top of the screen.
Determine the height between the basement and seventh floor : The pressure in a water pipe in the basement of an apartment house is 4.10x10^5 Pa, determine the height between the basement and the seventh floor
Determine the maximum detector spacing by drawing : Imagine a virtual expressway having 3 lanes. The administrating agency wants to detect traffic accidents in 5 minutes wherever they occur to dispatch an emergency response unit.
How far does the trailing edge of the bit lag behind : Suppose you have a 5Mbps access link (cable or DSL); what is the length of a bit on that link? That is, how far does the trailing edge of the bit lag behind the leading edge of the bit on that medium?
Determine what is the infiltration rate from the rain : A subsurface detention basin is installed beneath a street to help prevent flooding. Water from the rain is chanelled into the basin and begins to infiltrate into the ground when it reaches 1ft.
Describe the various methods for performing a job analysis : Describe the various methods for performing a job analysis for an administrative assistant position. Discuss the steps you would recommend and what information you would gather in each step. Explain how this information is then used in a developing a..
Compute the energy of the ground state : An oxygen molecule has a vibrational mode that behaves approximately like a simple harmonic oscillator with frequency 2.99 X 10^14 rad/s. Calculate the energy of the ground state
Discuss the different roles of a training professional : Discuss the different roles of a training professional. How do you see yourself fitting into these roles? What challenges might you face and how might you overcome them?
Detrermine magnitude and location of resultant fluil force : the tank contains water to depth of 2m and oil (sg=.8) on top of the water to a depth of 1m detrermine the magnitude and location of the resultant fluild force acting on one end of the tank

Reviews

Write a Review

Civil Engineering Questions & Answers

  Describe did the water depth increase or decrease

For each of the following transitions, draw E2,y2 on the specific energy chart and fully describe the reasoning. a. In a rectangular channel, there is a sudden drop in the channel bottom. Did the water depth increase or decrease

  Determine what design speed was used for the curve

A horizontal curve was designed for a four-lane highway for adequate SSD. Lane widths are 12 feet, and the superelevation is 0.06 and was set assuming maximum fx. If the necessary sight distance required 52 feet of lateral clearance from the roadw..

  Calculate the pressure and piezometric head at the surface

An open top tank contains a layer of SAE 30 oil 0.5 m thick, a layer of water 0.7 m thick, and a layer of mercury 0.3 m thick. Calculate the pressure, and the piezometric head at the free surface, at both interfaces, and at the tank bottom.

  Investigate the possibility of environmental problems

Investigate the possibility of environmental problems that faced by the area of disaster.

  Establish and sketch the energy equation for the scenario

write solution in a organized and easy to follow matter. Will rate life saver for diagram or picture.Water leaves a treatment plant in a 500-mm diameter ductile iron pipeline at a pressure of 600 kPa

  Write a vba function that receives a variable name

Write a VBA function that receives a variable name plus four known values and then solves the ideal gas equation for a specified variable.

  Volume of soil-excavated from the borrow pit

The volume of fill required is 2500 cubic meters. Find the volume of soil that must be excavated from the borrow pit to furnish the required volume of fill. (in cubic meters).

  Calculate the force

Calculate the force (in Kn) a punch press must exert if it is to punch out a large washer from a strip of 5-mm thick sheet steel with an ultimate shear strength of 400 MPa. The washer dimensions are as follows: hole diameter is 27 mm. outside diam..

  Determine diameter of second pipe is four times

water flows through a pipe of diameter 3 inches. If it is desired to use another pipe for the same flow rate such that the velocity head in the second pipe is four times the velocity of the first pipe.determine diameter of pipe

  Determine the flow rate of water through the channel

The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m

  Determine the drag coefficient for the sign type

The pressure on the back side is negative; its magnitude is 0.5 times the (negative) stagnation pressure on the back side. Determine the drag coefficient for the sign type

  What is the value of side b

In a right triangle with the hypotenuse c = 10 and the angle A =50 degrees , what is the value of side b ?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd