Determine what is the final weight in pounds and newtons

Assignment Help Civil Engineering
Reference no: EM13312312

A container weights 2.06lb. It is filled with 1.09ft^3 of water at 25 degrees Cel. What is the final weight in pounds and newtons?

Reference no: EM13312312

Questions Cloud

An ineffective supply chain : Give and explain one example of a firm with an effective supply chain and one with an ineffective supply chain.
Explain how to estimate the diameter of the small pipe : Fluid flows steadily, at a volume rate Q, through a large pipe and then divides into two small pipes, the larger of which has an inside diameter of 25 mm and carries three times the flow of the smaller pipe.
Explain how many of the potential alkyl halide products : A variety of different products could be formed in this reaction; for this problem assume all unique products are formed that only 1 Br is present in each alkyl halide product. how many of the potential alkyl halide products would have at least on..
Compute the magnitude of the load changes in length : A brass alloy has a yield strength of 280 MPa, a tensile strength of 390 MPa, and an elastic modulus of 105 GPa. A cylindrical specimen of this alloy 12.7 mm in diameter and 250 mm long is stressed in tension and found to elongate 7.6 mm
Determine what is the final weight in pounds and newtons : A container weights 2.06lb. It is filled with 1.09ft^3 of water at 25 degrees Cel. What is the final weight in pounds and newtons
Perform necessary error checking to ensure that a positive : Write a C program using the fork() system call that generates this sequence in the child process. The starting number will be provided from the command line. For example
Find the maximum height of the ball above the ground : You throw a 5-kg ball from a platform releasing the ball at a height of 5 meters with a speed of 10m/s at an angle of 30 degrees with respect to the horixontal. Find the maximum height of the ball above the ground
Determine the deflection in degree for horizontal wind speed : Determine the deflection in degrees for horizontal wind speed of 10m/s and what is the magnitude of the force required at the bottom of the sign to prevent the sign from deflecting
Iso standards apply to riordan manufacturing : Identify which ISO standards apply to Riordan Manufacturing

Reviews

Write a Review

Civil Engineering Questions & Answers

  How will the concentration of solute change in the water

Some organisms live in shallow ponds, where much of the water will evaporate during the warm, sunny, summer months. How will the concentration of solute change in the water druing this time

  Horizontal axle passing through center

A 75g , 30cm--long rod hangs vertically on a frictionless, horizontal axle passing through its center. A 12g ball of clay traveling horizontally at 2.5m/s hits and sticks to the very bottom tip of the rod.

  Design an earthen channel section into sandy soil

An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.

  Explain how to design for bending only using lrfd

A simply supported steel beam over a 24-ft span carries a uniformly distributed dead load of 2 k/ft, including an allowance for the self-weight, and a live load of 3.5 k/ft. The steel is A992, Grade 50.

  Determine magnitude and location of resultant force acting

The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by 3m wide).

  State 5 reasons why adding things to a project charter late

State 5 reasons why adding things to a project charter late in the project execution could be a detriment to the project's objectives

  How long did take for the rocket to reach that max height

At that time, there is no more fuel in the rocket engine and the rocket continues upwards in free fall (g=0 ft/sec/sec). (a) How high will the rocket reach before it begins to fall back to the campus

  Consolidation ratio of the soil at the unloaded condition

An increment of vertical stress of150kpa compress the sample to a void ratio of1.43. What is the over consolidation ratio of the soil at the unloaded condition.

  What will be the hardness and alkalinity of the mixture

If a student mixes 500 ml of a solution containing 50 mg/l of CaCl2 with 500 ml of containing 50 mg/l of NaHco3 what will be the hardness and alkalinity of the mixture of mg/l as CaCo3

  Determine the support reactions and the force in each member

The space truss shown is supported by a ball-and-socket joint at D and by short links at A and C. Determine the support reactions and the force in each member of the space truss.

  Determine how much area must the heat exchanger have

You have been assigned to design a heat exchanger to cool a gaseous process stream in a chemical plant. The stream flow at 20 kg/s and enters at 431 oK, It has a heat capacity of 3.45 J/g-oC , and needs to be cooled to 402 oK.

  Determine longitudinal and hoop stresses in the copper pipe

Typical water supply at a faucet in any building is conveyed in copper pipe that is ½" in inside diameter, with a wall thickness of 0.040". If the water pressure is 50 psi and the valve is closed (meaning that water is not flowing)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd