Determine what is the final pressure in the device

Assignment Help Civil Engineering
Reference no: EM13313085

A .2kg mass of argon gas fills a .05m^3 piston-cylinder volume at a pressure of 400 kPa absolute. The piston induced pressure is changed until the volume expands to twice its original value, while the temperature remains constant.

A) Does the argon change phase?( I think it has to do with looking up values?)

B) How many protons are in the cylinder?

C)What is the final pressure in the device?

Reference no: EM13313085

Questions Cloud

What are the velocities of the two people : A 68.0-kg person throws a 0.0500-kg snowball forward with a ground speed of 27.0 m/s. What are the velocities of the two people after the snowball is exchanged
Determine how many molecules of h20 is the system : A piston cylinder contains 0.8kg of steam (water vapor) at 300 deg C and 1MPa absolute. The steam is cooled at constant pressure until half of the mass condenses.
Find the speed of the golf ball just after impact : High-speed stroboscopic photographs show that the head of a 170-g golf club is traveling at 47 m/s just before it strikes a 46-g golf ball at rest on a tee, Find the speed of the golf ball just after impact
Created value is it also always able to capture that value : If a firm has created value is it also always able to capture that value? How does a firm create value and then what must it be able to do to capture that value? In your answer provide an example of a firm that has been able to create value. Then dis..
Determine what is the final pressure in the device : A .2kg mass of argon gas fills a .05m^3 piston-cylinder volume at a pressure of 400 kPa absolute. The piston induced pressure is changed until the volume expands to twice its original value, while the temperature remains constant.
Write a program that asks the user : Are you really really sure you do not want to use this program? (y/n)
Calculate the magnitude of the charge : Common transparent tape becomes charged when pulled from a dispenser. calculate the magnitude of the charge if electrostatic force is great enough to support the weight of a 9.00 mg piece of tape held 0.80 cm above another
What common strategy elements are shared across its brands : What is J.M. Smucker’s Company’s corporate strategy? What common strategy elements are shared across its brands? Did it make sense for Smucker to expand its business lineup beyond jams, jellies, and preserves? Why or why not?
What is the pipes diameter at the refinery : A round pipe of varying diameter carries petroleum from a wellhead to a refinery. At the wellhead the pipe\'s diameter is 50.5 cm, what is the pipe\'s diameter at the refinery

Reviews

Write a Review

Civil Engineering Questions & Answers

  Maximum height of its centre of gravity

If a mass of 500kg is placed centrally on the top face of the buoy, find the maximum height of its centre of gravity above the bottom of the buoy so that the buoy may remain in stable equilibrium.

  Determine how much flow rate will get using water

You are a farmer. You plan to supply to your fields using water from a lake that is 500 ft above your fields using a 3 inch smooth plastic pipe, 1500 ft long. How much flow rate will you get? Initial guess: f=0.03, no pump.

  Find the height and the width of the triangular soil bank

The soil's angle of repose is 35° and its swell is 25%. Find the height and the width of the triangular soil bank that will result from the trench excavation

  To what maximum angle, measured from vertical

To what maximum angle, measured from vertical, does the rod (with the attached ball of clay) rotate?

  Explain what criteria are used in the selection of personnel

What criteria are used in the selection of personnel for the demonstration of maintenance tasks? Define the criteria for the selection of test and support equipment.

  Determine the force exerted by the jet on the plate

A jet of water of diameter 75mm moving with a velocity of 25m/s strikes a fixed plates in such a way that the angle between the jet and plate is 60 find the force exerted by the jet on the plate.

  Explain what is the difference between axial and hoop stress

what is the difference between normal stress and allowable shear stress. What is the difference between axial and hoop stress and how do you calculate tensile force per mm.

  Determine what is the rate of leakage in gallons per day

An in-ground swimming pool may have a leak. The 30-ft by 10-ft by 5-ft (depth) pool is filled on June 1. On June 13, a hose, flowing at a rate of 10 gallons per minute, is used to add water to the pool. The hose is turned off after 1 hour.

  Determine the percentages of gravel-sand-silt and clay

The particle-size characteristics of a soil are given in this table. Draw the particle-size distribution curve. X-axis is Particle Size and Y-axis is Percent Finer Particle Size (mm): 0.425, 0.033, 0.018, 0.01, 0.0062, 0.0035, 0.0018, 0.001.

  Calculate the bearing stress on the shaft key

A rotating shaft with an applied torque of 400 Newton-meters is held in place (stopped) by a shaft key. The diameter of the shaft is 15 centimeters. The shaft key has a length of 20 cm, and is square, with its width and height being 5 cm.

  Strength of a semicrystalline polymer

Briefly explain how each of the following influences the tensile or yield strength of a semicrystalline polymer and why: (a) Molecular weight (b) Degree of crystallinity (c) Deformation by drawing (d) Annealing of an undeformed material

  Sketch process on p-v diagram clearly labeling final states

5 Kg of water at 1.2 MPa, 120oC is contained in a frictionless piston-cylinder device. The water is heated until its temperature reaches 250oC. a) a)Determine the work performed in kJ

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd