Determine what is the discharge from the pipe

Assignment Help Civil Engineering
Reference no: EM13310219

Flow occur throught a sand-filled pipe with a cross-sectional area of 60 cm^2. If K is 10^-3 cm/s and the gradient is 0.01, what is the discharge from the pipe ?

Reference no: EM13310219

Questions Cloud

What is the effective stree at the base of the aquifer : THE WATER TABLE OF A SATURATED , UNCONFINED AQUIFER COINCIDES WITH THE LAND SURFACE. THE AQUIFER IS 52 FT THICK AND THE MATERIAL HAS A UNIT WET WEIGHT OF 135 LB/FT^3.
Determine what is the hydraulic conductivity of the material : Water seeps vertically downward from the bottom of a lake through a uniform material to an aquifer below. The discharge is 0.005 ft^3/s through a 1 ft^2 area of the lake bottom.
Determine what is the hydraulic gradient of piezometers : The bottom of piezometers A and B are on the same flow line and 1000 m apart. The bottom of piezometer A is at 130 m and its water level is 160 m. The bottom of piezometer B is at 100 m and the water level is 150 m.
What is the average torque applied to the wheel : A wheel of mass m = 16kg and radius r = 0:5m is connected to a motor that causes it to attain rotational speed of w = 20rads^-1 in 10s, What is the average torque applied to the wheel by the motor
Determine what is the discharge from the pipe : Flow occur throught a sand-filled pipe with a cross-sectional area of 60 cm^2. If K is 10^-3 cm/s and the gradient is 0.01, what is the discharge from the pipe
Use some type of presentation software such as powerpoint : Each member of the team needs to talk some during the presentation. How you divide up the speaking responsibilities is up to the team.
Explain how the theory adds or may add to our understanding : Explain how the theory adds or may add to our understanding of your field and/or research topic and discuss and analyze the literature on two areas of controversy or unanswered questions related to the theory.
What is the maximum reaction time allowed : A ranger in a national park is driving at 32.0 mi/h when a deer jumps into the road 200 ft ahead of the vehicle. What is the maximum reaction time allowed
Determine the total power generation potential of the river : A river flows towards a lake with a velocity of 3 m/s and rate of 500 m3/s at a location of 90 m above the lake surface. Determine the total power generation potential of the river at that location.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate effective coefficient of friction between runways

A truck is designed to measure concrete roughness. During a typical test the driver will bring the vehicle to a constant test velocity, v, and then suddenly lock the brakes bringing the vehicle to a complete stop.

  Determine the force that should be developed in the cable

Determine the force that should be developed in the cable if the saddle keeps the pipe from sagging or deflection at its center. The pipe and fluid within it have a combined weight of 125lb/ft. EI is constant.

  Determine maximum speed of the free fall for the sky driver

A sky diver with a mass of 75 kg jumps from an aircraft. The aerodynamic drag force acting on the sky diver is known to be Fd = kV^2, where k = 0.228. Determine the maximum speed of the free fall for the sky diver and the speed reached after 100 m..

  Determine the friction angle and shear strength

Normal load at failure was 93.8N with a maximum shear load of 38.7N. Find stresses on the failure plane, sketch a graph showing these on the shear stress and normal stress axes. Find the friction angle and shear strength.

  Determining pressure in a coal mining dragline

The total flow then moves to a point W on the traction drive two metres off the ground, and travels through a nine millimetre diameter conduit. Ignoring all friction and minor losses, determine the pressures at points H and W.

  Determine what must the pipe diameter be

If a flow of 5.0 cfs is to be carried by an 11000 ft cast-iron pipeline without exceeding a head loss of 137 ft, what must the pipe diameter be

  Determine the angular acceleration of the spool

determine the angular acceleration of the spool and the acceleration of the trailer. The wheels have negligible mass and are free to rotate.

  Find the length of the studs in a rake wall with base height

Find the length of the studs in a rake wall with a 5:12 pitch, a half span of 9'4", 16" OC and a base height of 7'3".

  Design the typical elements of the roof and floor framing

The structure consists of a wood frame with plywood roof deck, wall sheathing and floor deck. general form of the building construction is to be determined by the designer.

  What is the astronomic azimuth of the line

The magnetic north azimuth of a line is 128 degrees 27' while the magnetic declination is 3 degrees 30'E. What is the astronomic azimuth of the line (in decimal degrees)?

  Sketch process on p-v diagram clearly labeling final states

5 Kg of water at 1.2 MPa, 120oC is contained in a frictionless piston-cylinder device. The water is heated until its temperature reaches 250oC. a) a)Determine the work performed in kJ

  Determine maximum normal stress in each of links be and cf

Rigid members ABC and DEF are joined with steel links BE and CF using 25mm pins. The links are made of 25mm thick 50mm wide plates and are single shear. Determine the maximum normal stress in each of links BE and CF

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd