Determine what is the departure rate at a parking lot

Assignment Help Civil Engineering
Reference no: EM13306094

The arrival rate at a parking lot is 6 veh/ min. Vehicles start arriving at 6: 00 P. M., and when the queue reaches 36 vehicles, service begins. If company policy is that total vehicle delay should be equal to 500 veh-min, what is the departure rate? (Assume D/ D/ 1 queuing and a constant service rate.)

Reference no: EM13306094

Questions Cloud

Find increase in temperature of the brakes : A 768 kg car moving at 27 m/s brakes to a stop. The brakes contain about 16 kg of iron that absorb the energy. What is increase in temperature of the brakes
Determine the velocity and thermal boundary layer thickness : Engine Oil at 60 degrees C flows over a 3m long and 2m wide plate whose temperature is maintained at 20 degrees C with a velocity of 2 m/s. Determine the rate of heat transfer from the entire plate.
What will be the time- mean speed and space-mean speed : Assume you are an observer standing at a point along a three- lane roadway. All vehicles in lane 1 are traveling at 30 mi/ h, all vehicles in lane 2 are traveling at 45 mi/ h, and all vehicles in lane 3 are traveling at 60 mi/ h.
What contributed to the success of the initiative : 1. Discuss an organizational change you have encountered that was successful. What contributed to the success of the initiative? What barriers were overcome to reach success?
Determine what is the departure rate at a parking lot : The arrival rate at a parking lot is 6 veh/ min. Vehicles start arriving at 6: 00 P. M., and when the queue reaches 36 vehicles, service begins. If company policy is that total vehicle delay should be equal to 500 veh-min
What horizontal distance does it travel : If the ball was hit when it was 1.2m above the ground, what horizontal distance does it travel before it lands on the building
What is the velocity of the projectile at the end of process : For simplicity assume the catapult consists of the piston-cylinder geometry (with the piston as the projectile) and that it is positioned horizontally. The steam initially occupies a volume of 1 liter at a pressure of 200 kpa.
A chief operating officer in a health care organization : A chief operating officer in a health care organization in India
Compute detention time and horizontal flow through velocity : Compute the detention time and horizontal flow through velocity. Do these values satisfy the standards for water works, which stipulate detention time is greater and equal to 30 min and 0.5 ft/min =

Reviews

Write a Review

Civil Engineering Questions & Answers

  Depreciation using straight line-double declining balance

Calculate the depreciation using straight-line, double-declining-balance (DBB), and MACRS (current IRS regulation) methods; and tabulate the depreciation schedule.

  Determine the operating speeds of the machine

Determine the operating speeds of the machine at which the machine's steady-state amplitude is less than 0.2 mm. Take keq = 3 EI/L3.

  Determine the magnitude of reaction

Determine the magnitude of reaction at point A (in kips) of a 20' beam with 5kips at 4' of the beam and 2kips at 9' of the beam at 350lbs./ft.

  Determine the maximum power output of the pelton wheel

A Pelton wheel, located at an elevation of 200.0 m, is used to extract power from a reservoir at an elevation of 800 m. A penstock 1500 m long and 0.8 m in diameter connects the reservoir with the nozzle of the Pelton wheel.

  Calculate the fuel load density and the opening factor

A hotel room has a floor area of 10 m by 4 m and is 2.5 high and has a window which is 1.6 m high and 3 m wide. The room contains some furniture and other commodities containing 50 kg polyurethane with 25 MJ/kg and 350 kg wood with 18 MJ/kg.

  Magnitude of shaft work obtained from the turbine

If the amount of heat transfer in the HE unit is 2460 kJ per kg of steam, what is the magnitude of shaft work obtained from the turbine in kW?

  Explain how to determine the power output of the turbine

The water enters at 1 atm at 10 C and the flow rate through the turbine is 40 m3/s. The water is discharged from the turbine 200 m below the intake at 1 atm and the temperature of the water at the discharge is 10.2 C.

  What is the minimum power rating required for the fan

1. 260 watts of electrical power consumption. 2. External temperature (cooling air inlet temperature) = 77 degrees Fahrenheit 3. Safety (touching) specification (cooling air outlet temperature) = 100 degrees Fahrenheit 4.

  Seepage velocity and estimating hydraulic gradient

The dye appears 14 days later in an observation well 75 ft away from the injection point. Compute the seepage velocity and estimate the hydraulic gradient in the aquifer if the porosity of the soil is 42%.

  Compute how many grams of water must be added to soil

it has been calculated that the maximum density for the soil will be obtained when the water content reaches 21.5%. Compute how many grams of water must be added to each 1000g of soil( in its natural state) in order to increase the water content 2..

  How to determine the critical depth by interpolation

water flows from a lake into a steep natural channel. the water surface elevation of the lake is 97.0 with respect to the datum. the channel properties are given below. determine the flow rate in the channel

  Simple curve having central angle problem

A simple curve has a central angle of 42 degreess. A point Y is located 24m from the vertex and has a perpendicular distance of 3.00m from the back tangent.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd