Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
An obstruction is lodged in a 10-ft wide rectangular channel (n = 0.022) that has a botom slope of 0.005. The depth of the channel just upstream of the obstruction is 5.0 ft. If the flow rate is 325 cfs, what is the channel and flow classification?
Calculate the minimum flow rate (m^3/hr) of river water needed to acheive pre cooling hot, pasteurized liquid prodcut assuming that 10% heat is lost to the surroundings during exchange and that the water temp after cooling should not exceed 25 deg..
A four-lane freeway (two lanes in each direction) is on mountainous terrain with 11ft lanes, a 5ft right-side shoulder, interchange spacing of one every 10 miles, and a 60mph base free-flow speed.
compose a list here of the geological terms that you encounter in this reading that you could not define and explain in a test situation.
A compressible clay layer 10.0m thick has an initial void ratio in situ of 1.026. Tests and computations show that the final void ratio of the clay layer after construction of a structure is 0.978. Determine the estimated primary consolidation set..
if a person and a wheelchair weigh 185 lbs how much effort force is required to travel up a ramp whose slope of 24.08 ft.
a ship has a cross-sectional area of 4000 ft^2 at the water line when the draft ( depth below the water line of the vessel bottom) is 10 ft. How many pounds of cargo will result in an increase of draft of 2 in ( specific weight is 64 Ib/ft^3 )
what should be the minimum radius of curvature p for the track at B so that the passengers do not experience a normal force greater than kmg?neglect the size of the car and passengers.Take k=4
A thin-walled cylindrical tank of radius r is subjected simultaneously to internal pressure p and a compressive force P through rigid end plates. Determine the magnitude of force P to produce pure shear in the cylindrical wall.
If friction between the cars and the rails is neglected, what were the magnitude and the direction of the velecity of the cars after the collision?
a. What is this investment's external rate of return b. What is the decision rule for judging the attractiveness of investments based on external rate of return c. Should Aerotron Electronics buy the water filtration system
Determine largest load P that can be applied without any cable exceeding its yield strength. Bar length in 10 ft with aluminum directly in the center and steel cables 5 feet on either side. Steel cable lengths are 8 ft and aluminum cable is 10 ft...
a rectangular clarifier with a length:width ratio of 3:1 receives a flow of 850m3/day. the clarifiers depth is 4.0m and the detention time of the water inthe clarifier is 2.4 hrs, what are the surface overflow rate and the horizontal flow through ..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd