Determine what is the carbonaceous oxygen demand

Assignment Help Civil Engineering
Reference no: EM13309323

Given a water that contains 80 mg/L of glucose (C6H12O6) and 18 mg/L of ammonia (NH3):
a. What is the carbonaceous oxygen demand (in mg 02/L)?
b. What is the nitrogenous oxygen demand (in mg 02/L)?

c. What is the total oxygen demand (in mg 02/L)?

Reference no: EM13309323

Questions Cloud

Explain what is the solubility of agcl(s) : a) Assuming ideal behavior, what is the solubility of AgCl(s) in 1.00 x 10-4 M NaCl if only Ksp is considered? (b) What is the solubility AgCl(s) if all 4 equilibria are considered for the 1.00 x 10-4 M NaCl
What is the elevation difference between high point and pvt : An equal-tangent crest vertical curve has a 50 mi/h design speed. The initial grade is +3%. The high point is at station 33+37.43 and the PVT is at station 37+18.26. What is the elevation difference between the high point and the PVT
Determine the kinetic energy of the pellet : An ideal spring is used to fire a 15.0-g block horizontally. The spring has a spring constant of 40 N/m, The kinetic energy of the pellet as it leaves the spring is
State expression which would give the solubility : Using the information given, write an expression which would give the solubility, S, as a function of the chloride ion concentration, [Cl-]. This means include all the equilibria.
Determine what is the carbonaceous oxygen demand : Given a water that contains 80 mg/L of glucose (C6H12O6) and 18 mg/L of ammonia (NH3): a. What is the carbonaceous oxygen demand (in mg 02/L) b. What is the nitrogenous oxygen demand (in mg 02/L)
Explain how many moles of agcl(s) will dissolve nacn : How many moles of AgCl(s) will dissolve in 1.00L of 0.100 M NaCN and what are the concentration of the various ions in solution. K = 7.08 x 1019 for the reaction Ag+(aq) + 2 CN- ? Ag(CN)2-
What should the reading be at y to adjust collimation error : a level is setup midway between X and Y reads 5.572 ft on X and 4.946 ft. on Y. The level is setup very close to X and a reading of 4.666 ft. is taken on X. what should the reading be at Y to adjust any collimation error of the level
Find out the same activity coefficients for h+ : Determine the same activity coefficients for H+ and OH- in the same aqueous MgCl2 solution using the Extended Debye-Huckel law. -log
What is the value of the kinetic coefficient of friction : a 2kg moves down a 45 degree incline at a constant velocity of .1m/s. What is the value of the kinetic coefficient of friction between the object and the incline

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the new unit weight and moisture content of soil

A sample of soil was compacted into a 945 ml.laboratory mold. The mass of the compacted soil was 1850 grams and its moisture content was 13.1%. Specific gravity of solids is 2.70, Compute the moist unit weight, dry unit weight, and degree of satu..

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

  Calculate cc and use the aisc equations e2-1 and e2-2

If design is needed, use a W-built-up cross section; select the W section and the thickness of the plate. Calculate Cc and use the AISC equations E2-1 and E2-2 to determine the allowable stress for each axis and ultimately the allowable load for t..

  Determine the horizontal and vertical components of reaction

Determine the horizontal and vertical components of reaction at the pin supports at A and B and indicate direction. Take F1 = 7 KN, F2 = 6 KN, and h = 1 m.

  Find the steady-state concentration of pollutant

The pollutant has a reaction rate coeeficient k of 0.25/day. Assuming is pollutant is well mixed in the lake, find the steady-state concentration of pollutant in the lake.

  Projectile shot vertically upward

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Calculate the quality of the steam exiting heat exchanger

A chemical plant uses a tube-­within-­a-­tube counterflow heat exchanger to heat air with the use of steam. During steady state operation, the air flows into the exchanger at a rate of 5,000 kg/h and a temperature of 27C and exits at a temperature..

  Define need before function

Which of the following is not a basic systems engineering concept?a. Define need before function

  Determine what is the average velocity of the groundwater

An underground gasoline storage tank has leaked benzene into an unconfined aquifer over a period of several months. The aquifer characteristics are: Ambient temperature=8 oC Hydraulic conductivity = 123 ft/day Hydraulic gradient = 0.00091 ft/ft

  Find what is the total force on the roof at collapse

a storage tank has a diameter of 80 ft, a height of 25ft and contains oil to a height of 15ft. the suction pumps, which can handle 15000bbl/d, are started, but the safety valves are clogged and a vacuum is drawn in the tank.

  Determine distance the officer traveled before overtaking

The officer believes the driver is intoxicated and begins accelerating uniformly to 50 mi/h in 8 seconds and maintains a constant velocity of 60 mi/hr, overtakes the motorist 42 seconds after he passed the officer.

  What is the tce concentration in ppm if the tank is filled

What is the TCE concentration in ppm if the tank is held at (a) 4 degrees C and (b) 35 degrees C (c) What is the TCE concentration in ppm if the tank is filled with hexane instead of water Consider the temperature dependence of the density of wat..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd