Determine what is the alkalinity in mg per l as caco3

Assignment Help Civil Engineering
Reference no: EM13297224

A water treatment llant and the water treatment plant removes calcium hardness (Ca2+) by precipitating (making) CaCO3(s). If, after establishing equilibrium with CaCO3(s), the dissolved Ca2+ concentration is 10 mg/L and the pH is 10.5.
a. What is the CO32- concentration in mol/L?
b. What is the HCO3- concentration in mol/L?
c. What is the alkalinity in mg/L as CaCO3?

Reference no: EM13297224

Questions Cloud

Explain hexanoyl chloride & 2 equivalents of methyl amine : Draw major organic product of- Hexanoyl chloride & 2 equivalents of methyl amine (H2NCH3)
How many states of nature there are : The equal likelihood criterion assigns a probability of 0.5 to each state of nature, regardless of how many states of nature there are.
What is the tension in the rope at that point : A heavy ball with a weight of 100N (m= 10.2 kg) is hung from the ceiling of a lecture hall on a 4.5-m-long rope. What is the tension in the rope at that point
Compare size of cmfr and pfr to achieve 50 percent : Compare the size of a CMFR (completly mixed flow reactor) and PFR (plug flow reactor) to achieve 50 percent removal of a contaminant, given a flow rate of 10^4 m^3/d and a first-order rate constant of -0.4/hr. Repeat for 99 percent removal.
Determine what is the alkalinity in mg per l as caco3 : A water treatment llant and the water treatment plant removes calcium hardness (Ca2+) by precipitating (making) CaCO3(s). If, after establishing equilibrium with CaCO3(s), the dissolved Ca2+ concentration is 10 mg/L and the pH is 10.5.
Find percentage of the original energy is lost : A power transmission line 50km long has a total resistance of 0.60 ohms. What percentage of the original energy is lost when the transformer is used
Conduct an online search related to recent within 1 year : Conduct an online search related to recent (within 1 year) developments in speech (voice-recognition) technology. Discuss the current status of speech technology as a viable business application
Explain trigonal pyramidal and square planar and linear : A. trigonal pyramidal, square planar, linear B. trigonal pyramidal, tetrahedral, see-saw C. trigonal planar, tetrahedral, square pyramidal D. T-shaped, see-saw, square pyramidal E. trigonal planar, see-saw, square planar I hate shapes, not positiv..
Determine what is the effluent bod concentration : An activated sludge tank, 30 x 30 x 200 ft, is designed as a plug-flow reactor, with an influent BOD of 200 mg/L and a flow rate of 1 million gallons per day. a. If BOD removal is first-order reaction, and the rate constant is 2.5 days^-1, what is ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the minimum flow rate

Calculate the minimum flow rate (m^3/hr) of river water needed to acheive pre cooling hot, pasteurized liquid prodcut assuming that 10% heat is lost to the surroundings during exchange and that the water temp after cooling should not exceed 25 deg..

  Determine mass flowrate through boiler needed to produce

Determine the mass flowrate through boiler needed to produce 5000KW of power.

  Isotropic and homogenous hydraulic conductivity

Assuming an isotropic and homogenous hydraulic conductivity of 0.0001 cm/s what is the magnitude and direction of specific discharge (q)?

  Who has been offered a 5-year contract at a remote location

Suzanne is a recent chemical engineering graduate who has been offered a 5-year contract at a remote location. She has been offered two choices. The first is a fixed salary of $75,000 per year.

  What is the station of the pt

a horizontal curve on a single-lane highway has its PC at station 124 + 10 and its PI at station 131 + 40. The curve has a superelvation of 0.06 ft/ft and is designed for 70 mi/h. What is the station of the PT?

  Show that the ratio of mean shear to the wall shear rate

for a laminar flow of a newtonian fluid in a tube of a circular cross section, show that the ratio of mean shear to the wall shear rate is 2/3

  Largest principal stresses and maximum shear stress

The shaft diameter is 100 mm. Calculate the largest principal stresses and maximum shear stress that will occur in the shaft.

  What is the moment about the z axis due to the force

the weigt w causes atension of 100 lb ic cable cd. if d=2ft, what is the moment about the z axis due to the force eserted by he cable cd at point c.

  How to label turing points numerically starting with tp1

A differential leveling loop started and closed on BM Juno, elevation 5194.02 ft. The BS and FS distancces were kept approximately equal. Readings (in ft) listed in the order takken are 9.65, 2.11, 2.51, 8.35, 2.06, 9.25, 7.93, 2.83, 5.05, and 4.6..

  Calculate by what factor the mass of propane has increased

A typical propane tank that we use for barbeque initially contains a pressure of 10 psi. The pressure is low, so we take it to the local store to fill the tank with more propane. After filling,the pressure is 100 psi.

  Calculate the speed of the car at the onset of skidding

A car collided with a telephone pole and left 20 ft skid marks on the dry pavement. Based on the damages sustained, an engineer estimated that the speed at collision was 15 mph. If the roadway had a +3% grade, calculate the speed of the car at the..

  What is the maximum water-hammer pressure that can occur

Water flows in a 100-m long pipe at 3 m/s. If the water temperature is 20 degrees C, determine the minimum valve-closure time to avoid creating the water-hammer pressures. What is the maximum water-hammer pressure that can occur

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd