Determine time at which collar starts to slip relative to it

Assignment Help Civil Engineering
Reference no: EM13303444

The system shown is initially at rest when the bent bar starts to rotate about the vertical axis AB with constant angular acceleration Alpha(not) =3 rad/ s^2 . The coefficient of static friction between the collar of mass m=2 kg and the bent bar is Us=0.35, and the collar is initially d=70 cm from the spin axis AB. Assuming the motion starts at t=0, determine the time at which the collar starts to to slip relative to it.

Reference no: EM13303444

Questions Cloud

Determine the x-y and z components of the force exerted : Cable AC is 70 ft long, and the tension i nthe cable is 5250 lb. Determine the x, y, and z components of the force exerted by the cavle on the anchor C. Also, find the angles theta-x, theta-y, and theta-z defining the direction of the force.
Determine the vertical reaction at a on the gate : A gate having the cross section is 4 ft wid and is hinged at C. The gate weighs 18,000 lb, and its mass center is 1.67 ft to the right of the plane BC. Determine the vertical reaction at A on the gate when the water level is 3 ft above the base.
Under what circumstances would the firm maintain : Suppose that a firm wishes to maintain a capital structure that is consistent with an A senior debt rating. Under what circumstances would the firm maintain a lower degree of leverage than a cross section of single-A-rated firms?
Game theory and cournot duopoly : What quantity, Q, should Banana Republic order, and what price P should it expect to charge? Illustrate the situation in a carefully labeled diagram, including the graphs of demand, marginal cost, marginal revenue, average total cost. Highlight the r..
Determine time at which collar starts to slip relative to it : The coefficient of static friction between the collar of mass m=2 kg and the bent bar is Us=0.35, and the collar is initially d=70 cm from the spin axis AB. Assuming the motion starts at t=0, determine the time at which the collar starts to to sli..
What is the wacc it should use for the project : The firm feels that the project is riskier than the company as a whole and that it should use an adjustment factor of + 3 percent. What is the WACC it should use for the project?
What is the tie ratio : The H.R. picket corp has 500,000 of debt outstanding, and it pays an annual interest rate of 10%. Its annual sales are 2 million, its average tax rate is 30% and its profit margin is 5%. what is the TIE ratio?
Select a small company you might like own and operate. : Select a small company you might like own and operate.
Identify the major factors influencing world affairs : Different industries must be included that may relate : Food industry, banking, telecommunication. mining to support the ideas in your report.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the maximum acceleration that the car can achieve

A car is traveling at 30 mph on a good, dry pavement at sea level. The front-wheel-drive car has a drag coefficient of 0.35, a frontal area of 30 ft2 and a weight of 2500 lbs. The wheelbase is 120 inches and the center of gravity is 20 inches from..

  Determine at what time does the minimum volume occur

The inflow to a small reservoir during a storm may be described by the equations Q=1000(1-e^-kt) where Q= flow in cfs k= runoff rate = 1.0 per hour t = time in hours The outflow through the dam gates is held constant at 800 cfs.

  What uniform annual series of cash flows over 12-year period

What uniform annual series of cash flows over a 12-year period is equivalent to an investment of $5,000 at t= 0, followed by receipts of $600 per year for 11 years and a final receipt of $1,600 at t= 12 of the investor's time value of money is 6% ..

  Why the prediction are less than the observed result

why the prediction are less than the observed result of connection in tension experiment?

  Determine the magnitude of force f2 and the angle

Two ropes are attached to the eye bracket. The resultant force R of the two forces equals 1000-lb and the line of action is directed along the x-axis. if the magnitude of force F1 is 250-lb, determine the magnitude of force F2 and the angle

  Declare a variable, twindow

Double the width of the window, using widen, set the height of the window so that it is the same as the width, and set the title to the new value "Square Window".

  Find how much water needs to be added to bring the sand

Given a sand with a moisture content of 10%, how much water needs to be added to bring the sand to a moisture content of 20%

  Determine what is the maximum water hammer pressure

0.5 m-diameter concrete pipe (5.0 cm rigid wall thickness with rigid pipe walls) carries water 600m before discharging into another reservoir. The surface elevation of the downstream reservoir is 55 m lower than the supply reservoir.

  Determine maximum concentration of chlorides to be observed

A non-reactive chloride solution is continuously discharged into an aquifer. The concentration at the discharge location is 800 mg/L. Determine the maximum concentration of chlorides to be observed at an observation well 30 m downstream of the disc..

  Find the maximum axial tension using lrfd

No incisions are noted. Find the maximum axial tension using LRFD. Can we resist the same force in compression if the member is 10ft long?

  Compute the after-tax rate of return using straight line

A $78,000 invtestment in machinery is proposed. It is anticipated that this investment will cause a reduction in net annual operating disbursements fo $16,300 a year for 12 years. The investement will be depreciated for income tax purposes

  What is the efficiency of the device

If a mechanical device requires 450J of work to do 310J of work in lifting what is the efficiency of the device?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd