Determine the temporary hardness and permanent hardness

Assignment Help Civil Engineering
Reference no: EM13308284

A well water has the following mineral contents in mg/L: Na+=20; K+=35; Ca+2 =15; Mg+2 =10; Sr=0.5; Cl- =40; HCO3- =65; CO3-2=5; SO4-2=15; and NO3=10. Determine the alkalinity, total hardness, temporary hardness, and permanent hardness.

Reference no: EM13308284

Questions Cloud

Find an expression for the diameter of the droplet : find an expression for the diameter, D, of the droplet, in terms of the specific weight and surface tension, assuming the contact angle just before seperating is zero.
Poverty and pollution case study : Poverty and Pollution Case Study
Calculate the gravitational potential energy of the moon : the distance between the earth and moon (r = 3.84 Ã- 108 m) and Mmoon = 7.36 Ã- 1022kg and Mearth = 5.98 Ã- 1024kg. Calculate the gravitational potential energy of the moon
How could she exert more torque : A 55 kg person riding a bike puts all her weight on each pedal when climbing on a hill. How could she exert more torque
Determine the temporary hardness and permanent hardness : A well water has the following mineral contents in mg/L: Na+=20; K+=35; Ca+2 =15; Mg+2 =10; Sr=0.5; Cl- =40; HCO3- =65; CO3-2=5; SO4-2=15; and NO3=10.
Find the radius of the hole : A square copper plate has a circular hole in its center. Each side of the plate is 23.52 cm, and the radius of the circular hole is 7.827 cm. find the radius of the hole
Calculate pressure and piezometric head at free surface : Calculate the pressure, and the piezometric head at the free surface, at both interfaces, and at the tank bottom. Take the elevation datum at the bottom of the tank.
Are commodities x and z substitutes or compliments : The estimated market demand of a commodity X is given as Q=70-3.5P-0.6M+4Pz, where Q=Estimated units of X demanded, P=Price of the goods, M= Money income and Pz= Price of related goods.
What beat frequency do you observe : Two in-phase loudspeakers are some distance apart. They emit sound with a frequency of 1 kHz. What beat frequency do you observe

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the space-mean speed in mile per hour

If there are 50 vehicles on a 4000-ft highway lane and the average time headway between two adjacent vehicles is 2.2 seconds. A) Calculate traffic density in vehicle/mile (vpm) and average space headway in feet/vehicle (fpv).

  Calculate the pressure in psignat the bottom of the tank

Assume a hydrostatic condition in a cubic tank with 64ft length, 32ft width and 16ft height. The tank is filled with 15ppg( pounds per gallon) fluid. Calculate the pressure in psignat the bottom of the tank.

  Calculate pump power equired to operate the heat exchanger

The heat exchanger consists of 12 m of copper tubing that is 2 cm in diameter with 19 return bends. The flow rate is 3 x 10-4 m3/s. Water enters at 20 C and exits at 80 C. The elevation difference between the entrance and the exit is 0.8 m.

  Compute the maximum acceptable service load

Compute the maximum acceptable service load on an A36 steel plate tension member 1/4in.x12in. having a single line of holes parallel to the direction of loading. The load is 25% dead load and 75% live load, and 7/8in. diameter bolts are used.

  How many gallons of water are contained in the tank

Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.

  Determine by how much is the delivered power reduced

Your neighbor has the Bonda generator in the next problem and they have graciously extended a 100 foot extension cord to your home, which has a resistance of 0.0075 ohms per foot of wire (per lead). By how much is the delivered power reduced

  Find the temperature stress produced

A rod of steel is 20 m long at a temperature of 200C. find the free expansion of the rod when the temperature is raised to 650C. Find the temperature stress produced

  What is the annual crash rate for section of college street

Over the past 3 years, there have been 14, 13, and 15 crashes on this section of College Street. The two-way ADT on this section is 16,474 vehicles per day. What is the annual crash rate for this section of College Street

  Determine what constricted width would be to force the flow

Given that uniform flow is subcritcal and there is a constriction in a rectangular channel, how do you determine what the constricted width would be to force the flow to be critical. Draw this transition on a specific energy curve.

  Define deflection of a beam

Deflection of a Beam, If a beam of lenght L is fixed at the ends and loaded in the centre of the beam by a point load of F newtons the deflection

  Determine the location of the hydraulic jump

the flow rate is 600 cfs. for a long distance upstream the bottom slope is 2.5%. the bottom slop of the channel abruptly changes to 0.6% and continues at that slope for a long distance determine the location of the hydraulic jump.

  Calculate the weight of the waste gas processed per min

A gas containing 80% CH4 and 20% (by mole) He is sent through a quartz diffusion tube to recover the He. 20% by weight of the original gas is recovered and its composition is 50% He.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd