Determine the system reliability

Assignment Help Electrical Engineering
Reference no: EM13869239

1. Two nickel-cadmium batteries provide electrical power to operate a satellite transceiver. If both batteries are operating in parallel, they have an individual failure rate of 0.1 per year. If one fails, the other can operate the transceiver (at a reduced power output). However, the increased electrical demand will triple the failure rate of the remaining battery. Determine the system reliability at 1, 2, 3, 4, and 5 year. What is the system MTTF?

2. An engine health monitoring system consists of a primary unit and a standby unit. The MTTF of the primary unit is 1000 operating hours, and the MTTF of the standby unit is 333 hour when in operation and 2000 hours while in standby status. Estimate the design life of the system if specifications require a reliability of 0.9. What is the system MTTF?

3. A computerized airline reservation system has a main computer on-line and a secondary standby computer. The on-line computer fails at a constant rate of 0.001 failure per hour, and the standby unit fails when on-line at the constant rate of 0.005 failure per hour. There are no failures while the unit is in the standby mode.

(a) Determine the system reliability over a 72-hour period

(b) The airline desires to have a system MTTF of 2000 hour. Determine the minimum MTTF of the main computer to achieve this goal assuming that the standby computer MTTF does not change.

4. A truck company requires two loading machines to unload a truck in 5 hours. Working together, the two loading machines have a failure rate of 0.05 per hour. However, if one fails while unloading a truck, the other's failure rate increases to 0.2 per hour as a result of the increase in the unloading rate necessary in order to complete the task on time. Compute the probability (reliability) that a truck will be successfully unloaded by a two-machine system. What is the expected time to failure (in working hours) of the two-machine system.

Reference no: EM13869239

Questions Cloud

How long does blu-ray take to read the entire disk : Blu-ray runs at 4.5 MB/sec and has a capacity of 25 GB. How long does it take to read the entire disk? A manufacturer advertises that its color bit-map terminal can display 224 different colors.
Applying the intermediate value theorem : Applying the intermediate value theoremSuppose f is a continuous function on [-2, 2] such that f(-2)=1, f(2)= -1?Which of the properties below follow without further restriction on f by applying the Intermediate Value Theorem?
Calculate the data rate in gb per second of herbs eyes : Each pixel is basically a superposition of five ‘‘colors'', each of which has 32 intensities. The time resolution of Herb's visual field is 10 msec. Calculate the data rate, in GB/sec, of Herb's eyes.
A material error in net income for a previous period : On January 1, 2010, Franklin Company had a retained earnings balance of $206,000. During 2010 the following events occurred:
Determine the system reliability : If both batteries are operating in parallel, they have an individual failure rate of 0.1 per year. If one fails, the other can operate the transceiver (at a reduced power output). However, the increased electrical demand will triple the failure ra..
Determine the displacement of joint : Problem 1: For the following truss, each member has the same EA. All members are pin connected at their joints. (i) Under the loads at C and D, determine the displacement of joint D along the CD direction (20')
How many pages is one toner cartridge good for : The rest is blank (i.e., no toner) The toner layer is 25 microns thick. The printer's toner cartridge measures 25 * 8 * 2 cm. How many pages is one toner cartridge good for?
Determine the binomial distribution for any random data : Determine the binomial distribution for any random data. Also determine the probability greater than 4.
Write the summary for the statistical methods : Write a few lines about the main question and design of the study and then write the summary for the statistical methods. Basically something like the abstract but the statistical section should be more detailed than the rest

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What total charge is contained within a cylinder of radius a

An electric flux density is given by D = D0 a, where D0 is a given constant. (a) What charge density generates this field (b) For the specified field, what total charge is contained within a cylinder of radius a and height b

  Determine the steady state drop in area frequency

An interconnect 60-Hz power system consist of one area with three turbine genrator units rated 1000,750,500 MVA respectively. The regulation constant of each unit is same R=0.05 per unit based on its own rating.

  Sketch the circuit needed to implement the counter

a binary pulse counter can be constructed by inter connecting t-typeflip-flops in an appropriate manner. assume it is desired toconstruct a counter which can count up to 100 subscript 10. A) how many flip flops are required

  Calculate additional series resistance required to reduce

a four pole, series motor runs at 900rev/min when taking 30A from a 230V supply. the total resistance ofthe armature and the series field is 0.8Ω. Calculate the additional series resistance required to reduce the speed to 500rev/min if the torque ..

  Calculate the conductivity of the material

An n-type semiconductor is known to have an electron concentration of 5 × 10 ^17 m-3 . If the electron drift velocity is 350 m/s in an electric field of 1000 V/m, calculate the conductivity of this material.

  What are the four speeds available for each resistor

A 1/10hp motor has a 1000 rpms with 20v across the armature and series winding there are three speed control switches. The motor speed decreases linearly what are the four speeds available if each resistor is .54 ohms.

  What is the energy storage capacity of the battery

A certain 11 V dry-cell battery, completely discharged, requires a current of 100 mA for 1.2 hr to completely recharge. What is the energy storage capacity of the battery, assuming the voltage does not depend on its charge status?

  Find the total charge lying within the space

Within a region of free space, charge density is given as ρv=ρorcosθ/a c/m3, where ρo and a are constants. Find the total charge lying within (a) the sphere, r

  Calculate the input current and power on the no-load test

A three-phase, wye-connected, 400-V, four-pole, 60-Hz induction motor has primary leakage impedance of (1+j2) ohms and secondary leakage impedance referred to the primary at standstill of (1+j2) ohms.

  Describe what type of damping is exhibited by v

the voltage v in a certain circuit is described by the differential equation 3v"+24v'+75V=0 a) determine the values of α and w0 b) what type of damping is exhibited by V(t)

  Let x be a random variable that is exponentially

let x be a random variable that is exponentially distributed with agt0 i.e. fxx aexp-ax for xgt0 and fxx0 for xlt0.

  Determine a low side and high side voltage of transformer

when operating in the step down mode and feeding a load impedance of 8

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd