Determine the storage content at the end of 30 days

Assignment Help Civil Engineering
Reference no: EM13300618

During a particular 30-day period, the streamflow flowing into a reservoir averaged 5.0 m3/s. Water supply withdrawals from the reservoir averaged 136 mgd. The only other outflow from the reservoir was 9.4 cm of evaporation from the water surface. The average surface area of the reservoir during the 30 day period was 3.75 km2. The reservoir had 12,560 ac-ft of water in storage at the beginning of the 30 day period. Determine the storage content at the end of 30 days alternatively in m3 and ac-ft.

Reference no: EM13300618

Questions Cloud

Define titration of the excess unreacted edta required : A 50.0 mL sample containing Cd2 and Mn2 was treated with 69.6 mL of 0.0600 M EDTA. Titration of the excess unreacted EDTA required 11.9 mL of 0.0220 M Ca2
Find how high will the other ball go after the collision : A 6.00 kg ball is dropped from a height of 11.0m above one end of a uniform bar that pivots at its center. The bar has mass 7.50kg, How high will the other ball go after the collision
Determine the speed of the moving cart before the collision : A 237 kg cart runs into the rear end of a 120 kg cart that is stationary. What is the speed of the moving cart before the collision
Apply the decision rules used in the class : Apply the decision rules used in the class and select the best alternative.
Determine the storage content at the end of 30 days : During a particular 30-day period, the streamflow flowing into a reservoir averaged 5.0 m3/s. Water supply withdrawals from the reservoir averaged 136 mgd. The only other outflow from the reservoir was 9.4 cm of evaporation from the water surface.
Determine the five-year equivalant annual annuity : Determine the five-year equivalant annual annuity of the following poject if the appropriate discount rate is 16%.
Explain the solution is then back titrated with zn2 : A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of a 0.04068 M EDTA solution. The solution is then back titrated with 0.02053 M Zn2 solution at a pH of 5
Choice of accounting method : What factors should be considered in determining whether equity-method reporting is appropriate and which of the two methods likely to show the larger reported contribution to Slanted's earnings in 20X4? Explain.
What is the internal rate of return of a project costs : What is the internal rate of return (IRR) of a project costs $45,000 if it is expected to generate $15,047 per year for five years?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the discharge in cubic feet per second

A 2 foot tall multi-stage weir placed in a channel to cause the water to flow over the contracted weir at a height of 0.75 feet. There are 2 contractions and the original length is 6 feet. What is the discharge, in cubic feet per second

  Determine the location of the deepest point of the curve

The elevation of the curve at its deepest point must be at elevation 168.00 feet or higher to clear a major pipe installation. If the PVC is at station 0+00 with an elevation of 176.20 feet, determine the location of the deepest point of the curve..

  Design a logic circuit

Design a logic circuit that, when enabled with an active-high signal named en, will detect four different ranges of values for a 5-bit input number.

  Importance of mineral identification in applications

What are minerals? Sketch different types of mineral crystal forms and list different types of rock forming minerals. Describe with examples the importance of mineral identification in engineering applications.

  Determine which system represents better treatment option

The company can either buy a single 200m^3 ideal plug flow tank, or three 80m^3 completely mixed tanks that operate in series. the cost is essentially the same. The pollutant is removed as a part of a first order reaction with a rate constant value..

  Determine what is the speed in rpm of the car wheels

If a car engine is turning at 4000 rpm, the transmission gear ratio is 3:1 and the final drive ratio is 4:1. (a) what is the speed in rpm of the car wheels and (b) the vehicle speed if the tire radius is 8 inches

  Calculate the time till the smoke layer is from the floor

A room has a floor area of 500 m^2 and a height of 4 m. THe room is involved in a fire with a constant energy release rate of 1 MW. calculate the time till the smoke layer is 1.5 m from the floor for (a) the case where the leakage areas are at the ..

  Shape of a circular arc

Rod AB is bent into the shape of a circular arc and is lodged between two pegs D and E. It supports a load P at end B. Neglecting friction and the weight of the rod, determine the distance c corresponding to equilibrium when a = 43mm and R = 143mm..

  Describe the measurements that would have to be taken

describe the measurements that would have to be taken and the equations that would have to be used to determine G23, V32, and E2 for a specially orthotropic transversely isotropic material from a single tensile test.

  Develop an estimate of the volumetric flow rate of air

Develop an estimate of the volumetric flow rate of air that will be required for aeration of the mixed liquor in an activated sludge system.For this calculation, assume that the (ultimate) CBOD is 200 mg/L and (ultimate) NBOD is 50 mg/L.

  What is the mass of the earth in pound-mass and kilograms

The Earth may be considered as a sphere whose diameter is 8000 mi. and whose density is roughly approximated to be 6560 kg/m^3. What is the mass of the Earth in pound-mass and kilograms

  Determine mass flowrate through boiler needed to produce

Determine the mass flowrate through boiler needed to produce 5000KW of power.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd