User Account

All Pages

Determine the steady state irreversibility rate of each

Assignment Help Mechanical Engineering
Reference no: EM13640434

The surface temperature of a 100 W incandescent lightbulb is 60.0°C. The surface temperature of a 20.0 W fluorescent tube producing the same amount of light as the 100 W incandescent lightbulb is 30.0°C. Determine the steady state irreversibility rate of each light source when the local environmental temperature is 20.0°C, and comment on which is the more efficient.

Reference no: EM13640434

Questions Cloud

If the process is not reversible but is adiabatic and : a steady flow air compressor takes 5.00 kgmin of atmospheric air at 101.3 kpa and 20.0degc and delivers it at an exit
Both the velocity and acceleration of the motorcycle point : a motorcycle has a constant acceleration of 2.4 ms2. both the velocity and acceleration of the motorcycle point in the
Determine the discharge temperature and the power required : a steady flow steady state air compressor handles 4000 ft3min measured at the intake state of 14.1 psia 30.0degf and a
If 0186 kg of chromium is deposited on a bumper in 105 min : conducting objects can be chrome-plated by immersing them in an electrolytic bath having positive chromium ions in
Determine the steady state irreversibility rate of each : the surface temperature of a 100 w incandescent lightbulb is 60.0degc. the surface temperature of a 20.0 w fluorescent
The moon has a mass of 736 x 1022 kg and a radius of 174 x : the moon has a mass of 7.36 x 1022 kg and a radius of 1.74 x 106 m.a what is the acceleration due to gravity on the
The following random sample of annual salaries was recorded : 50524846325147205349the following random sample of annual salaries was recorded. units are in thousands of dollars.
Determine the specific availability of the helium in the : a stationary tethered balloon contains helium gas an ideal gas here at 0.00degc and 0.0700 mpa at a height of 1000 m.
What nucleophile could be used to react with butyl iodide : what nucleophile could be used to react with butyl iodide to prepare the following compound? if your answer is a metal

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  If the coefficient of rolling resistance of a cylinder on a

if the coefficient of rolling resistance of a cylinder on a flat surface is 0.5inch at what inclination of the surface

  Ten 10 kg of water at 100 degrees c expands in a piston and

ten 10 kg of water at 100 degrees c expands in a piston and cylinder arrangement from a volume of 0.1 m3 to a final

  Vital information about overall heat transfer coefficient

Important information about Overall Heat Transfer Coefficient A copper sphere of internal diameter 2 m and wall thickness 40 mm is insulated with 75 mm of expanded polystyrene

  The motor is 15 in long and 10 in in diameter the a area is

a 1.5 hp motor is operarating in a room with air t of 20 c. the motor has an efficency of 78. the motor gives off heat

  A wheel can be modeled as a thin ring having mass 10 kg and

a wheel can be modeled as a thin ring having mass 10 kg and four spokes made of slender rods each of mass 2 kg. the

  Stray heat transfer with the surroundings and changes in

a pump a steady state receives liquid water at 20 c and 100 kpa with a mass flow rate of 50 kgmin. the water exits the

  If the inner and out radii of the shell are r1 5cm r2 6

a spherical shell made of a material with a density of 1600 kgm3 is placed in water. if the inner and out radii of the

  Find temperature at the center of the solid after two

a steel thermal diffusivity 0.00001172 k43 cylinder 10 cm in diameter and 10 cm long is initially at 300degc. it is

  By how much will the bullets miss the target

a hunter aims directly at a target 140 meter away. if the bullet leaves the gun ay a speed of 280 m/s, by how much will the bullets miss the target?

  If the local atmospheric pressure is 101 kpa and

a barometer is used to measure atmospheric pressure contains mercury with a density of 13590 kgm3. if the local

  The total cross-sectional area of the inlet to the jet

the total cross-sectional area of the inlet to the jet engines is 20 ft2. assume that the flow properties of the air

  Derive the linearised equation about the operation

For the pendulum shown in the figure,the restoring torque due to gravity is given by T=mgLsin(thita). Derive the linearised equation about the operation point thita=0.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd