Determine the stack-gas so2 concentration in units

Assignment Help Civil Engineering
Reference no: EM13302031

The sulfur dioxide (SO2) stack-gas concentration from fossi-fuel combustion is 2 ppmv. Determine the stack-gas SO2 concentration in units of micro grams/m^3. Assume 0C and 1 atm pressure

Reference no: EM13302031

Questions Cloud

What is contact and non-contact forces : What is a force? There are contact and non-contact forces? Can you give an example of each? Is force a vector?
Calculate the residence time of the treatment cell : Consider a rectangular wastewater treatment cell having a length of 100ft, width of 20ft and depth of 20ft. If the flow into the cell is 50ft^3/min, calculate the residence time of the treatment cell.
By how much did firm net income exceed its free cash flow : In order to sustain its operations and thus generate sales and cash flows in the future, the firm was required to make $1,250,000,000 of capital expenditures on new fixed assets and to invest $300,000,000 in net operating working capital.
What is the magnification of this magnifying glass : If a student with relaxed "normal" eye finds a magnifying glass with a focal length of 78 mm, What is the magnification of this magnifying glass
Determine the stack-gas so2 concentration in units : The sulfur dioxide (SO2) stack-gas concentration from fossi-fuel combustion is 2 ppmv. Determine the stack-gas SO2 concentration in units of micro grams/m^3. Assume 0C and 1 atm pressure
Find the number of harmonic corresponding to this frequency : A 2.50m long pipe closed at one end, Find the number of the harmonic corresponding to this frequency
Conceptual standpoint vs. technical standpoint : What are some types of software that can help us protect employee information? how does this software interact with our current HR technology? explain from a conceptual standpoint vs. a technical standpoint.
Determine the concentration of the sodium ion in solution : A mass of .525g of NaCl has been added to a cylinder containing water. The cylinder diameter is 1.5in and depth of water in 5inches. Determine the concentration of the sodium ion in solution, showing your ans in units of a) mg/L b) mass % and c) m..
By how much would the roe have changed : Has it cut costs and increased its net income in this amount, by how much would the ROE have changed?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum possible flame temperature

Consider your cooking gas contains 80% propane and 20% butane. While burning on a cooktop, assume it burns with 200% excess air. If no heat is lost, determine the maximum possible flame temperature.

  Convert all quantities to si units then convert it to mph

Assume the plane is flying at an altitude of 32,810 ft (10 km), where the temperature is -8 C and the pressure is 250 mb. The Pitot-static tube measures a piezometric pressure difference corresponding to 1.206 psi. What is the airspeed in both m/s..

  Determine the force that should be developed in the cable

Determine the force that should be developed in the cable if the saddle keeps the pipe from sagging or deflection at its center. The pipe and fluid within it have a combined weight of 125lb/ft. EI is constant.

  What is the effective stress 20feet deep for specific weight

Effective stress is defined as the overburden soil pressure less the buoyancy effect of water. What is the effective stress 20 feet deep if the specific weight of the dry soil is 113 pcf and the water table is 11 feet deep

  Determine what is the speed in rpm of the car wheels

If a car engine is turning at 4000 rpm, the transmission gear ratio is 3:1 and the final drive ratio is 4:1. (a) what is the speed in rpm of the car wheels and (b) the vehicle speed if the tire radius is 8 inches

  Determining the crest and sag vertical curves

Determine, for the crest and sag vertical curves required, the stationing and elevation of the PVCs and PVTs given that the PVC of the crest curve(on westernmost level highway section) is at station 0+00 and elevation 100 ft.

  Determine what is the pressure acting on the sand

A 3-ft diameter column with weight of 150 kg is placed on top of 1 m thick aggregate layer. The soil beneath the aggregate layer is sand. The friction angle of the aggregate is 36 degrees and the unit weight is 22 lb/ft3. What is the pressure acti..

  Required to dewater a construction site

It is required to dewater a construction site 80 m by 80 m. The bottom of the construction will be 1.5 m below the initial water surface elevation of 90 m.

  What would be failure deviatoric stress sigma1-sigma3 stress

The effective angle of friction (phi) was found to be 26 degrees for a normally consolidated soil. If the soil is tested in consolidated drained triaxial test under sigma3 = 60 kPa, what would be the failure deviatoric stress sigma1-sigma3 stress

  Find the factor of safety based on the ultimate force

An eighteen inch diameter sandstone column is subjected to an axial compressive force of 2x10^6 lb / ft. Find the factor of safety based on the ultimate compressive force. For the ultimate compressive stress of sandstone=85Mpa.

  Determine the pressure within the tank using psf as unit

A water-filled U-tube manometer is used to measure the pressure inside a tank that contains air. The water level in the U-tube on the side that connects to the tank is 5 ft above the base of the tank.

  Rectangular duct carries air

A 30mm pipe X 460 mm rectangular duct carries air. What size square conduit is needed to transport 4m cube per sec of water at a distance of 45m and head loss of of 1.08m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd