Determine the speed of the stone

Assignment Help Civil Engineering
Reference no: EM13210775

A 0.20 kg stone attached to a 0.8 m long string is rotated in a horizontal plane. The string makes an angle of 25° with the horizontal. Determine the speed of the stone.

Reference no: EM13210775

Questions Cloud

What is the elevation of the tip of the spire : The telescope of the instrument is 5.25 ft above the ground station, whose elevation is 415.65 ft. What is the elevation of the tip of the spire? (Ignore atmospheric refraction and earth curvature)
Calculate the largest tolerable internal crack length : Calculate the largest tolerable internal crack length for a 7075-T651 aluminum alloy component that is loaded to a stress one-half of its yield strength without catastrophic fracture. For the alloy, the plane strain fracture toughness is 24 and yi..
Formulate the shear and bending moment expressions : Show/formulate the shear and bending moment expressions for each board, and plot/draw the shear and bending moment diagrams of the boards.
Depict all of the resonance structure of scp : Draw all of the resonance structure of SCP-.write formal charges on All atoms. point out which one has most likely resonance
Determine the speed of the stone : A 0.20 kg stone attached to a 0.8 m long string is rotated in a horizontal plane. The string makes an angle of 25° with the horizontal. Determine the speed of the stone.
Draw the bending moment and shear force diagrams : Draw the Bending Moment and Shear Force diagrams for the girder and calculate the maximum tension in the cable.
Define sodium carbonate required of a sulfuric acid solution : a 0.336 gram sample of sodium carbonate required 28.6ml of a sulfuric acid solution to reach the endpoint for the reaction Na2CO3 +
Determine the maximum temperature in the tank : Determine the maximum temperature in the tank. Take the thermal conductivity of the wastes as 2.0 W/mK.
Calculate the intensity ratio of sorces : two cohernt sources produce interference patern intensity ratio of bright fringe to dark fringe is 9/1. calculate the intensity ratio of sorces.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the rate of flow-unconfined aquifer

In an unconfined aquifer having K = 30/m/day, two observation wells, 3km apart, have water levels of 50 and 40 m, respectively, above the base of the aquifer. Determine the rate of flow.

  Determining the pumping rate

Determine the required pumping rate. the aquifer has T= 1600 m 2 /day and the wells each have radius of influence of 600m.

  Determining the dry volume

A saturated sample of clay with an sl 20 has a natural water content of 32%. What would its dry volume be as a percentage of its original volume of Gs.= 2.67.

  Practice autocad software package

To provide knowledge and practice AutoCAD software package for engineering activities.

  Ethylene diamine tetra-acetic acid

Ethylene diamine tetra-acetic acid (EDTA) is a water-soluble compound that readily combines with metals, such as calcium, magnesium, and iron. The molecular formula for EDTA is C10N2O8H16. Assume one EDTA molecule complexes (associates with) one m..

  What is your recommendation for the maximum size of coarse

What is your recommendation for the maximum size of coarse aggregate for the following situation?

  Magnitude of the acceleration of the train

The train passes point A with a speed of 30 m/s and begins to decrease its speed at a constant rate of at = - 0.25 m/s2. Determine the magnitude of the acceleration of the train when it reaches point B, where sAB = 412 m.

  What is the elevation of lower point

A pre- engineering base line was run down a very steep hill.rather than measure horizontaily down hill with steel tape: surveyor measured the vertical angle with the theodolite and slope distance with 16m steel tape.

  Determine the compression of each spring

The 75 lb block is released from rest 5 ft above the plate. Determine the compression of each spring when the block momentarily comes to rest after striking the plate.

  What is the corrected measurement

A measurement was recorded as 171.278 m with a 30-m tape that was only 29.996 m under standard conditions. What is the corrected measurement?

  Plot transition from tangent to full superelevated section

The superelevation rate is 0.084. Prepare a plot showing the ordinates required for the transition from the tangent section to the full superelevated section, assuming that the pavement width is 7.3 m wide. Make any necessary assumptions.

  Replace the two couples with a single equivalent couple

The two shafts in a speed-reducer unit are subjected to couples of magnitude M1 = 18 N · m and M2 = 7.5 N · m, respectively. Replace the two couples with a single equivalent couple, specifying its magnitude and the direction of its axis.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd