Determine the specific gravity of the soil solids

Assignment Help Civil Engineering
Reference no: EM13309297

A soil has a moisture content of 31.4%, a degree of saturation of 90% and a unit weight of 17.3kN/m^3. Determine the specific gravity of the soil solids.

Reference no: EM13309297

Questions Cloud

Explain how net foreign investment links the market : Clearly explain how net foreign investment links the market for loanable funds and the market for foreign currency exchange. Make sure you define net foreign investment in your answer.
What is their velocity immediately there after : Two boys are sliding toward each other on a frictionless, ice-covered parking lot. Jacob, mass 45 kg, is gliding to the right at 7.67 m/s, What is their velocity immediately there after
Complete the one-variable data table : As a student at USI and a member of the budget committee for theMadrigal Feaste, you have been given a partially completed workbook, MadrigalFeaste.xlsx, and asked to complete the project.
The adult client with musculoskeletal disorder : Annual direct and indirect costs for bone and joint health are 849 billion– 7.7% of the gross domestic product. You might think that cancer is the most dangerous illness affecting the global population but in reality, disorders that you might not be ..
Determine the specific gravity of the soil solids : A soil has a moisture content of 31.4%, a degree of saturation of 90% and a unit weight of 17.3kN/m^3. Determine the specific gravity of the soil solids.
Explain separation and purification scheme 50% toluic acid : separation and purification scheme 50% toluic acid, 40% fluorene, 10% 1,4-dibromobenzene
Determine magnitude and location of resultant force acting : The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by 3m wide).
Determine the angular momentum of the particle : The position vector of a particle of mass 2.10 kg as a function of time is given by rarrowbold = (6.00 ihatbold + 4.00 t jhat bold), Determine the angular momentum of the particle
What is the osmotic pressure of this protein solution : A membrane has pure water on one side of it, and a protein solution on the other side. The membrane has pores equivalent in size to a spherical molecule with a molecular weight (Mm) of 120,000 daltons.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the couple m required to hold the system

the pin at B is attached to member ABC and can slide freely along the slot cut in the fixed plate. Neglecting the effect of friction, determine the couple M required to hold the system in equilibrium when.

  Determine the new reading along the inclined leg

If the pressure in pipe B is decreased 10 kPa and the pressure in pipe A remains unchanged, determine the new reading along the inclined leg of the mercury manometer.

  Determine the time for the log to reach a speed

A truck is hauling a 300-kg log out of a ditch (20 degree incline) using a winch attached to the back of the truck. Knowing the winch applies a constant force of 2500N and the coefficient of kinetic friction between the ground and the log is 0.45

  Average waiting time in the queue

What is the average length of queue, the average time spent in the system, and the average waiting time in the queue?

  Determine the horsepower of the device

water flows from a lake as is shown in fig. p8.40 at a rate of 4.0 cfs. is the device inside the building a pump or a turbine? Explain and determine the horsepower of the device. neglect all minor losses and assume the friction factor is .025

  Determine how high an elevated reservoir must be

Often times, this pressure comes from the fact that community's water supply is stored in an elevated reservoir. Determine how high an elevated reservoir must be so that the water supply has a pressure of 50 psi. Given: the unit weight of water is..

  Prove that the fluid in the pipe will flow from a location

Assume that you have a constant diameter pipe that has no pumps or turbines connected to it.Prove that the fluid in the pipe will flow from a location with high piezometric pressure to one with low piezometric pressure.

  Determine the volume of direct surface runoff in acre-ft

Determine the volume of direct surface runoff in acre-ft that will result from the following storm. The basin area is 1000 acres. The phi index is 0.5 in./hr. 30-minute period 1 2 3 4 Rain intensity (in./hr) 0.9 0.5 0.6 0.5

  Calculate the plume centerline temperature at 6 m height

A pump in a large industrial hall containing 30 liters gasoline breaks down, causing the gasoline to spill into a 3 m2 sump surrounding the pump. The liquid pool is ignited by sparks. Assume the combustion to be 70% effective and the heat loss due..

  What is the length of a 2 degree increment along meridian

What is the length of a 2 degree increment along a (A) meridian and (B) parallel at 45N and 115W. Assume the radius of Earth is 6370 km.

  Consolidation ratio of the soil at the unloaded condition

An increment of vertical stress of150kpa compress the sample to a void ratio of1.43. What is the over consolidation ratio of the soil at the unloaded condition.

  Determine the maximum shear stress at the end

A 600 mm long solid steel shaft is to transmit a torque of 30 N-m, G=90 GPa, diameter 15mm. Determine (a) Maximum shear stress, and (b) Angle of twist (phi) at the end.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd