Determine the shortest stopping distance for each moment

Assignment Help Civil Engineering
Reference no: EM13312280

Test reveal that a normal driver takes about 0.75s before he can react to a situation to avoid a collision. It takes about 3 seconds for a drunk driver to do the same. If such drivers are traveling on a straight road at 44ft/s and their cars can decelerate at 2ft/s^2, determine the shortest stopping distance for each from the moment they see the pedestrians.

Reference no: EM13312280

Questions Cloud

Explain what amount of hcl gas of a buffer solution : What amount of HCl gas must be added to 1 L of a buffer solution that contains [acetic acid]= 2.0 M and [acetate]= 1.0M in order to produce a solution with a pH of 4.26
How much tension does the bird produce in the wire : The distance between two telephone poles is d = 52.0 m. How much tension does the bird produce in the wire
Write a draft of the proposal as your boss requested : Draft a set of ground rules for committee meetings. Try to suggest rules that will minimize political differences and focus on the overall benefit to the company.
Determine the minimum acceptable wall thickness : Determine the minimum acceptable wall thickness using thin cylinder theory and determine the minimum acceptable wall thickness using thick cylinder simulation software.
Determine the shortest stopping distance for each moment : Test reveal that a normal driver takes about 0.75s before he can react to a situation to avoid a collision. It takes about 3 seconds for a drunk driver to do the same. If such drivers are traveling on a straight road
Explain the starting material or product is favored : Given the following value, tell whether the starting material or product is favored at equilibrium. Keq=0.2 Is this a starting material favored or a product favored
Find the magnitude of the impulse applied to the golf ball : A golf ball strikes a hard, smooth floor at an angle of 33.1 ° and, as the drawing shows, rebounds at the same angle. find the magnitude of the impulse applied to the golf ball by the floor
Determine the reactions at the supports by a rocker : The compound beam is fixed at A and supported by a rocker at B and C. There are hinges (pins) at D and E. Determine the reactions at the supports.
Compute the rms (average) speed of nf3 atoms : Calculate the rms (average) speed of NF3 atoms or molecules at 202 oC. Use R = 8.314 kg-m2/K-s2-mol for the value of the gas constant.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the difference in the rate of grade

indicate the conditons by a sketchand determine the difference in the rate of grade at the intersection of each of the following paris of slops.

  Find what must be the composition in copper-nickel alloy

It is desirable to produce a copper-nickel alloy that has a minimum noncold-worked tensile strength of 390 Mpa and a ductility of at least 40% elongation. Is such an alloy possible If so, what must be its composition

  Design an earthen channel section into sandy soil

An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.

  Determining stress fort rigid bar of negligible weight

The rigid bar of negligible weight is supported as shown. Find the stress in each rod if the temperature rises DeltaT after a load P is applied. Use the following data: area of steal rod 320mm2, bronze rod 1300mm2, thermal expansion coefficient Al..

  Whether proportional limit is exceeding for either material

To prevent this high compression load from buckling the copper pipe, a solid steel support of 2 1/2 inch diameter is placed inside the copper pipe. The copper pipe is 8.000 inches long. The steel support is 8.0001 inches (exactly 1 mil = 1/1000 in..

  Determine the distances the spacecraft must be from moon

consider a spacecraft that is positioned directly between the earth and moon.the mass of the moon's is approximately 7.35 X10^22 kg, and at the instant under consideration, the moon is 3.8 X 10^8 km from earth.

  Find specific weight and total moisture content of sample

A sample of dry sand with a specific gravity total of 16.49 kN/m3 and a relative density of 2.67 grains, is placed outdoors. During a rainy period, the sample volume remains constant but the degree of saturation increases to 40%.

  Which operation is carried out at atmospheric pressure

Benzene is to be absorbed from coal gas by means of a wash oil. The inlet gas contains 3% by volume of benzene, and the exit gas should not contain more than 0.02% benzene by volume.

  What are the coordinates of the point

An agronomist wants to measure the rainfall at the centroid of a plowed field between two roads. What are the coordinates of the point where the rain gauge should be placed?

  Determine the force in each member of the truss

Determine the force in member AB Determine the force in member AE Determine the force in member BC Determine the force in member BE Determine the force in member CD

  Calculate the amplitude of vertical motion of the machine

A machine is supported on four steel springs for which damping can be neglected. The natural frequency of vertical vibration of the machine-spring system is 200 cycles per minute. The machine generates a vertical force p(t)=p0sinwt.

  Design a rectangular reinforced concrete beam for the span

design a rectangular reinforced concrete beam (tension steel only) for the span and superimposed service loads shown. use f'c=5000psi and A615 grade 60 steel. LL=3.5 k/ft over the first 12 feet of the beam

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd